Lab Supplies for life Education | Industry | Science Labware Starter Kit Product Number Polymer Description Quantity 237755 PMP Transparent Economy Molded Cylinder, 50mL 1 237765 PMP Transparent Economy Molded Cylinder, 100mL 1 237775 PMP Transparent Economy Molded Cylinder, 250mL 1 226415-0070 HDPE Cylindrical Jar with Screw Closure and Insert, 70mL 1 226415-0500 HDPE Cylindrical Jar with Screw Closure and Insert, 500mL 1 226415-1000 HDPE Cylindrical Jar with Screw Closure and Insert, 1000mL 1 259845 HDPE Test Tube Rack, Two Tier, for up to 18mm Tubes 1 262175 LDPE Droppers, Bellow-Type Bulb, 1.5mL 5 262185 LDPE Droppers, Bellow-Type Bulb, 5.0mL 5 299334-000B PP/LDPE Test Tube/Centrifuge Tube, Blue Closure, 16mm 2 299334-000R PP/LDPE Test Tube/Centrifuge Tube, Red Closure, 16mm 2 299334-000W PP/LDPE Test Tube/Centrifuge Tube, White Closure, 16mm 2 299334-000Y PP/LDPE Test Tube/Centrifuge Tube, Yellow Closure, 16mm 2 412575 NYL Spatula/Stirrer 10" 3 426364-07 PS Transparent Container with Snap-on Cap, 7Dram/24mL 3 501505-0125 PP Graduated Bottle Wide Mouth with Marking Area, 125mL 1 501505-0250 PP Graduated Bottle Wide Mouth with Marking Area, 250mL 1 502754-02 PS Pipette Graduated 2mL 5 506805-0250 LDPE Wash Bottle Narrow Mouth Sloped w White Clsr 250mL 1 522085-0100 PP Printed “Square Ratio” Beaker, 100mL 1 522085-0250 PP Printed “Square Ratio” Beaker, 250mL 1 326495-0500 PP Beaker with Handle, 500mL 1 537835-0100 PP Graduated Cylinder w/ Graduations, Squat Form, 100mL 1 542365-04 PP Lightweight Funnels, 50mm ID 1 605085-0005 LDPE Dispensing Bottle 15mL 1 605085-06 LDPE Dispensing Bottle 180mL 1 Lab Starter Pack Labware Starter Pack $100.03 each Copyright Dynalab Corp. 2016 and earlier. Dynalon Labware Chemical properties of plastics key Excellent resistance Not recommended Good resistance No information Limited resistance Reagent LDPE HDPE PP PMP PVC PC PS SAN ABS PMMA PTFE PFA E-CTFE Temperature °C 20 50 20 50 20 50 20 50 20 50 20 50 20 50 20 50 20 50 20 50 20 50 20 50 20 50 Temperature °F 68 22 68 122 68 22 68 122 68 122 68 122 68 122 68 122 68 122 68 122 68 122 68 122 68 122 Acetic Acid Acetone Ammonium Chloride (10%) Ammonium Hydroxide (28%) Boric Acid (10%) Calcium Hydroxide (Saturated) Chloroform Citric Acid Ethyl Alcohol Formaldehyde (Formalin) Formic Acid (50%) Formic Acid (100%) Fuel Oil Glycerine (Glycerol) Hydrochloric Acid (5%) Hydrochloric Acid (35%) Hydrogen Peroxide (30%) Isopropyl Alcohol Methyl Alcohol (Methanol) Mineral Oil Nitric Acid (10%) Nitric Acid (70%) Phosphoric Acid (85%) Photographic Developer Photographic Fixer Potassium Hydroxide (50%) Sodium Hydroxide (10%) Sodium Hypochlorite (Bleach) Sulphuric Acid (10%) Sulphuric Acid (98%) Turpentine Vegetable Oil This chart gives general guide lines only on the chemical resistance of plastics. There are many factors which influence chemical resistance. Always test for your own application before selecting the appropriate product. quality . value . service 3 Plastics properties& LDPE (Low Density Polyethylene) HDPE (High Density Polyethylene) Introduction • Translucent naturally • Translucent rigid polymer flexible polymer • Temperature range of The Dynalon catalog technical • Temperature range of -100 to +120ºC section aims to provide clear, -50 to +80ºC • Not autoclavable concise information about the • Not autoclavable • Good to excellent chemical key polymers from which our • Good to excellent chemical resistance ranges are manufactured. It is intended as your guide to the resistance • High impact resistance suitability of our products for • Robust and virtually unbreakable • Used for storage bottles, use with a variety of chemical • Used for wash bottles, storage containers and jars groups, and in a variety of bottles, transfer pipettes, vials environments. Excellent resistance (no attack) Each polymer has its own Excellent resistance (no attack) to dilute and concentrated Acids, entry with detailed technical to dilute and concentrated Acids, Alcohols and Bases. information and a summary Alcohols, Bases and Esters. icon denoting its general Good resistance (minor attack) chemical suitability Good resistance (minor attack) to Aldehydes, Esters, Aliphatic and characteristics. Those to Aldehydes, Ketones and Aromatic Hydrocarbons, Ketones Polymers capable of being Vegetable Oils. and Mineral and Vegetable Oils. repeatedly Autoclaved at, at least 121°C for 30 minutes Limited resistance (moderate Limited resistance (moderate are denoted by the letter A, attack suitable for short term use attack and suitable for short term more detailed temperature only) to Aliphatic and Aromatic use only) to Halogenated resistance is often included in Hydrocarbons, Mineral Oils and Hydrocarbons and Oxidizing the text. Oxidizing Agents. Agents. The information within this Poor resistance and not section is designed to answer recommended for use with quick facts most common application questions but like any guide Halogenated Hydrocarbons. Maximum Temperature: will not answer all. Dynalon's 248°F (120°C) Technical Department will be quick facts Minimum Temperature: pleased to answer any question relating to Maximum Temperature: -148°F (-100°C) product usage. 176°F (80°C) Autoclavable: No Minimum Temperature: UV Resistance: Poor -58°F (-50°C) Translucent and Rigid Autoclavable: No Recycling Code: 2 UV Resistance: Poor Translucent with Excellent flexibility HDPE Recycling Code: 4 LDPE 4 Dynalon Labware chemical resistance PP (Polypropylene) PMP (Polymethylpentene) PS (Polystyrene) • Translucent rigid polymer • Transparent rigid polymer • Transparent rigid polymer • Temperature range • Temperature range • Temperature range 0 to +135ºC 0 to +145ºC -10 to +70ºC • Autoclavable (repeatedly) • Autoclavable • Not autoclavable • Good to excellent chemical • Good to excellent chemical • Moderate chemical resistance resistance resistance • Brittle yet has excellent clarity • Impact resistant • Glass like clarity • Used for petri dishes, pipettes • Used for beakers, bottles, • Used for transparent beakers and container ware cylinders and screw closures and cylinders Excellent resistance (no attack) Excellent resistance (no attack) Excellent resistance (no attack) to dilute Acids, Alcohols and to dilute and concentrated Acids, to dilute and concentrated Acids, Mineral Oils. Alcohols, Bases and Mineral Oils. Alcohols, Bases and Mineral Oils. Good resistance (minor attack) Good resistance (minor attack) Good resistance (minor attack) to Vegetable Oils. to Aldehydes, Esters, Aliphatic to Aldehydes, Esters, and Limited resistance (moderate Hydrocarbons, Ketones & Vegetable Vegetable Oils. attack and suitable for short Oils. Limited resistance (moderate term use only) Limited resistance (moderate attack and suitable for short term to concentrated Acids. attack and suitable for short term use only) to Aliphatic and Poor resistance not use only) to Aromatic and Aromatic Hydrocarbons, Ketones recommended for use with Halogenated Hydrocarbons and and Oxidizing Agents. Aldehydes, Esters, Aliphatic, Oxidizing Agents. Poor resistance not Aromatic and Halogenated recommended for use with Hydrocarbons, Ketones and quick facts Halogenated Hydrocarbons. Oxidizing Agents. Maximum Temperature: 275°F (135°C) quick facts quick facts Minimum Temperature: Maximum Temperature: Maximum Temperature: 32°F (0°C) 293°F (145°C) 158°F (70°C) Autoclavable: Yes Minimum Temperature: Minimum Temperature: UV Resistance: Poor 32°F (0°C) 32°F (0°C) Translucent and Rigid Autoclavable: Yes Autoclavable: No Recycling Code: 5 UV Resistance: Poor UV Resistance: Good Clear and Rigid Clear and Rigid PP Recycling Code: 7 Recycling Code: 6 PMP PS quality . value . service 5 Bag - Beaker Bags LDPE/PP BAGS LDPE .0015” THICK 626785 -0002 -0003 Length inches 4 4 Height inches 6 10 Case Quantity 100 100 Case Price $ 10.08 10.08 626785 -0004 -0005 Length inches 6 6 Height inches 8 1/2 10 Case Quantity 100 100 Case Price $ 11.23 12.25 Beakers PTFE* 626785 -0006 --0008 -0009 -0010 -0011 Length inches 6 8 10 10 12 • Optional watch glass available • Not graduated Height inches 12 10 1/2 12 16 18 Case Quantity 100 100 100 100 100 Isostatically molded from virgin PTFE and machine finished to give a Case Price $ 13.32 13.80 16.77 21.80 22.71 smooth surface for ease of cleaning and to eliminate contamination. Beakers with pouring spouts are virtually immune to chemical attack, only attacked by some fluorine containing compounds at very high 626785 -0013 -0014 -0015 temperature and molten alkalis metals. Working temperature range is Length inches 16 18 22 from cryogenic to 260°C. Height inches 18 24 28 Case Quantity 100 100 100 PTFE BEAKERS 312284 312294 312024 312034 312044 Case Price $ 28.80 36.37 47.39 Capacity ml 1 5 10 25 50 Height mm 18 26 33 47 60 Diameter mm 13 20 24 32 43 BAGS AUTOCLAVABLE POLYPROPYLENE .0015” THICK Price Each $ 11.36 14.26 15.95 18.82 20.73 628505 628515 628525 628535 628545 Length inches 446610 PTFE BEAKERS 312054 312064 312084 312074 312094 Height inches 6 10 10 12 16 Capacity ml 100 250 400 500 600 Case Quantity 100 100 100 100 100 Height mm 68 97 106 125 125 Case Price $ 18.37