Windscreen Replacement Step-By-Step Working Instructions Teroson Bond 180 True Primerless

Windscreen Replacement Step-By-Step Working Instructions Teroson Bond 180 True Primerless

WINDSCREEN REPLACEMENT STEP-BY-STEP WORKING INSTRUCTIONS TEROSON BOND 180 TRUE PRIMERLESS 1 2 Clean new windscreen Inspect new windscreen Unpack the new windscreen. To remove dirt and grime, Check the new windscreen for damages or scratches and clean it from both sides using a professional cleaner such make sure it fits. as TEROSON BOND Glass Cleaner. 3 4 Abrade bondline Clean bondline Abrade the bondline with the TEROSON BOND Sponge or Apply the TEROSON BOND Glass Cleaner again and dry off abrasive pad. the bondline in one direction using a lint-free cloth. 5 6 Remove old windscreen Prepare body frame Remove the attachments from the car and cut out the Remove all dirt from the frame using TEROSON BOND Glass windscreen. Using the TEROSON BOND Easy Cut makes Cleaner and a lint-free cloth. Then evenly trim back the re- it especially easy. maining bead. Cover paint damages with primer if needed. 7 8 Determine bead height Prepare adhesive cartridge Determine bead height in roof area. Where the roof is Remove its bottom lid and pierce the top membrane to the same height as the pane, cut the applicator nozzle to open the cartridge beforehand. Insert into application gun. the correct height: final bead height = flange height (x) plus 2 mm. 9 10 Apply the adhesive bead Install new windscreen For best results, move the nozzle at a right angle to the Carefully insert the new windscreen into the body frame. horizontally positioned screen. It is recommended that the Use TEROSON VR 5080 fix & repair tape to secure the cartridge content is extruded evenly in one pass. correct positioning temporarily. Install attachments. 11 12 Observe Safe Drive-Away Time Calibrate ADAS Be sure to observe the Safe Drive-Away Time. For Make sure that all driving assistance systems are calibrated. TEROSON BOND 180 True Primerless it is 3 hours. Follow the car manufacturer’s instructions for re-calibration After this time it is ensured that it is safe to drive away. of the safety systems. INFO TEROSON BOND 180 True Primerless is a 1-component primerless polyurethane windscreen adhesive for highly convenient and efficient windscreen replacements. As no primer is needed the application process is both fast and safe. For further product information see technical data sheets and safety data sheets. Visit www.henkel- adhesives.com/windscreenadhesives Henkel (Malaysia) Sdn Bhd Unit 2.01, 2.02, Level 2, All marks are trademarks and/or registered trademarks of Henkel and its affiliates Mercu 3, Jalan Bangsar, in the U.S., Germany and elsewhere. KL Eco City, 59200 © 2020 Henkel (Malaysia) Sdn Bhd. All rights reserved. Kuala Lumpur, Malaysia www.henkel-adhesives.com.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    2 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us