
MATEC Web of Conferences 31, 110(05 2015) DOI: 10.1051/matecconf/201531110 0 5 C Owned by the authors, published by EDP Sciences, 2015 The maintenance and management system of Zhoushan Trans-sea Bridge Lianying Zhou1, Houbin Fan2, Juan Liao3 , Chao Yang 4and Hao Tian5 1 Zhejiang University City CollegeˈHangzhou 310015, China 2 Zhejiang Zhoushan Cross-Sea Bridge Co., Ltd., Zhoushan 316031, China 3 Zhejiang University City CollegeˈHangzhou 310015, China 4 Zhejiang Institution of Communications Hangzhou 311112, China 5 Zhejiang Scientific Research Institute of Transport, Hangzhou 310006 Abstract˖ The maintenance management system with respect to Zhoushan Trans-sea Bridge is detailed introduced in this paper. The management system is mainly made up of two parts: Structure Health Monitoring System and Electronic Manual Inspection System. For Structure Health Monitoring System, the components, the service condition, and the evaluation are detailedly discussed. For Electronic Manual Inspection System, the main contents of the inspection management manual and the components of ScanPrint system are briefly introduced. 1 Introduction manual includes the definition and description of all the contents included in the inspection and maintenance[5-7]. Zhoushan Trans-sea Bridge, composed of Jingtang The ScanPrint system is an electronic version of the Bridge, Xihoumen Bridge, Taoyaomen Bridge, inspection & maintenance manual, which is mainly used Xiangjiaomen Bridge, Cengang Bridge and the junctions, as the record and management of structural damage is a key component of Yong-Zhou highway in national information, as well as the analysis of the structural highway net. Xihoumen Bridge is a two-span continuous operation state and service level. steel box-girder suspension bridge and its main span is 1650m, which is the second longest and the longest suspension bridge in the world and in China, respectively. 3 Application of the EMIS It is also the worldwide longest split steel box-girder suspension bridge. Jingtang Bridge is the longest bridge 3.1 the Inspection & Maintenance Manual in the five bridges of the Zhoushan Trans-sea Bridge. The In order to solve the practical problems involved in main navigation channelis a five-span steel girder cable- the maintenance and management of Xihoumen Bridge stayed bridge with a 620m main span. and Jintang Bridge, the guidance documents with respect In order to capture the real-time structural state and to the inspection and maintenance of the two bridges, that prevent the disastrous accidents, a structural management are Xihoumen Bridge Inspection & Maintenance Manual system with the advanced technology and the appropriate and Jintang Bridge Inspection & Maintenance Manual, measures for bridge operating environment is established are drawn up according to the individual characteristics based on the modern transducer technology, the signal of Xihoumen Bridge and Jintang Bridge, based on the [1-4] analysis, the long-range intelligent control, and so on . review of the maintenance and management of the The integrated management system mainly consists of existing long-span bridges, the reference of the the Electronic Manual Inspection System (EMIS). experience, and the most advanced ideas and methods relating to the bridge maintenance and management[5]. 2 The system configuration 3.1.1 Overview of Inspection and Maintenance The EMIS established in Zhoushan Trans-sea Bridge is mainly composed of two parts: the inspection & The basic objective of inspection and maintenance is: maintenance manual and the ScanPrint system. As a (1) to guarantee the bridge structure is not out of service programmatic document of the structural inspection & due to the functional deterioration; (2) to reach the maintenance system, the inspection & maintenance allowable maintenance standard with the minimum cost; a Corresponding author: [email protected] This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits distribution, and reproduction in any medium, provided the original work is properly cited. Article available at http://www.matec-conferences.org or http://dx.doi.org/10.1051/matecconf/20153111005 MATEC Web of Conferences and (3) to keep the bridge structure with the upstanding basic data relating to the maintenance and management operation state during the design service life. Therefore, project. According to the actual characteristics of various the risk and quantitative management is introduced, the structural members, Regular Inspection is divided into unit level-based bridge management is achieved, and a three levels and the corresponding inspection frequencies custom-made preventative inspection and maintenance are: project with respect to Xihoumen Bridge and Jintang A-grade Inspection: semi-annual inspection. Bridge is provided based on the structural risk assessment. B-grade Inspection: annual inspection. The inspection plan, in which the proportional effect, the C-grade Inspection: triennial inspection. minimum cost, and the high efficiency are considered, (4)Special Inspection. Special Inspection is an can provide the substantial basis relating to the inspection emergency-reacting inspection, which is triggered when management. Regarding the positions and members easy the disasters such as typhoon, earthquake, ship collision, to abrasion and (or) degradation, the inspection frequency car accident, and fire are occurred. should be relatively high, the repair and replacement (5)Particular Inspection. Particular inspection is a should be the part of the routine maintenance, and the pertinent inspection based on the abovementioned Daily corresponding reserve items should be put on the Inspection, Regular Inspection and Special Inspection. It maintenance plan. During the maintenance, the damaged aims at further evaluating the damage degree, analyzing and (or) deteriorated members should be substituted by the damage cause, and predicting the damage the reserve item using the least time in order to minimize development, which is composed of onsite inspection, the time of traffic disruption. The pertinent working indoor test and calculation analysis, etc. procedure, which is composed of the maintenance method, the explanation and experimental condition of 3.2 the ScanPrint System relative material, the technological standard, the The ScanPrint system, developed by the French inspection level and range, the testing standard, and the Advitam company, is introduced in the EMIS. This standard and requirement of inspection record including product has been successfully employed in the material supply, should be drawn up with respect to each maintenance and management systems established in daily or particular maintenance method. The inspection many long-span bridges. The chinesization is performed and maintenance procedure is shown in Figure 1. and the Chinese codes are introduced in ScanPrint system Start by the bridge administration. The Electronic Manual Inspection System is thus established, based on the Daily inspection Regular inspection Special inspection database and all-electronic input. The framework of ScanPrint system is shown in Figure 2. 0-3 pointsComprehensive 4-5 points Comprehensive assessment assessment no severe damage Daily or light maintenance 0-3 points severe damage Daily or light Particular inspection maintenance Basic data management 4 points Comprehensive 0-3 points Design data Manual inspection assessment Construction Photo record 5 points Analysis Intermediate or Repair or Daily or light Database core Maintenance heavy maintenance reinforcement maintenance Figure 1 Inspection and maintenance procedure Report generation Data management Data maintenance 3.1.2 Classification of Inspection According to the effect and the time period, the Figure 2 The framework of the ScanPrint system inspection is classified as five types: Initial Inspection, Daily Inspection, Regular Inspection, Special Inspection The ScanPrint system is composed of four sections: and Particular Inspection. the Database management module, the Inspection (1)Initial Inspection. Initial Inspection is a management module, the Onsite inspection module, and comprehensive inspection when the structure is just the Analysis report module. finished and has not gone into service, or the structure is just reinforced or rebuilt. (2)Daily Inspection. Daily Inspection is a routine 3.2.1 Database Management Module inspection with respect to the technical condition of deck The Database management module is the >IwQ[y@ subsidiary facilities, superstructures, substructures, as management core of ScanPrint, and its main function well as accessory structures. includes: the structure information management, the (3)Regular Inspection. Regular Inspection is a risk database management, as well as the prediction and assessment-based periodical inspection. This inspection analysis of maintenance cost. Furthermore, the structure covers all structure and its accessory structures. It aims at information management consists of the engineering evaluating the structural serviceability and providing the 11005-p.2 ICMEE 2015 information (such as the design, the construction, the still existed. As a result, these problems are urgently location, the photos, and the drawings), the inspection needed to be solved by the bridge administration and the forms, and the damage grade criterion. existing maintenance and management system can thus be gradually improved. 3.2.2 Inspection Management Module Acknowledgements
Details
-
File Typepdf
-
Upload Time-
-
Content LanguagesEnglish
-
Upload UserAnonymous/Not logged-in
-
File Pages3 Page
-
File Size-