AT2400 Alltouch® Remote Control How Do I Program the Mode Keys? What If None of the Codes Work? the Same Time, Regardless of the Current Mode

AT2400 Alltouch® Remote Control How Do I Program the Mode Keys? What If None of the Codes Work? the Same Time, Regardless of the Current Mode

FCC Compliance Setting Up Your Remote (continued) User’s Guide Can I Change My Volume Control? Can I Change My Channel Control? This device complies with Part 15 of the FCC Rules. You can program your Volume and Mute keys to By default, the channel keys on your remote (CH+, Operation is subject to the following two conditions: function in one of two ways: CH-, digits 0-9, and Last) let you change channels (1) This device may not cause harmful interference, • To control the volume on a single device all on the set-top, the TV, or a VCR, depending on the and (2) this device must accept any interference the time current mode. You can disable or enable channel received, including interference that may cause control for the TV or VCR mode. Also, if you have ® • To control the volume on each device, AT2400 AllTouch undesired operation. reassigned your AUX key to control a second TV depending on the mode key that you press or VCR, you can disable or enable channel control Note Remote Control Note: The default setting is to control volume for that device as well. See Reassigning Mode This equipment has been tested and found to comply through your TV all the time. Keys, earlier in this section, for more information. with the limits for a class B digital device, pursuant Follow these steps to change the way your Volume If you disable the channel control for a TV or VCR, to Part 15 of the FCC Rules. These limits are and Mute keys function. designed to provide reasonable protection against then the channel keys in that mode will control 1. Turn on the appropriate device. harmful interference in a residential installation. channels on the set-top. V This equipment generates, uses, and can radiate radio 2. Press SETTINGS to access the General Settings To disable channel controls in a mode (so that the C T V A R C frequency energy and, if not installed and used in on-screen menu, and verify that the Audio: channel keys always control the set-top)... U B X L Volume Control setting is set to “Variable.” S accordance with the instructions, may cause harmful 1. Press one of the following key combinations ING POWER TT E S GUIDE interference to radio communication. However, 3. Press SELECT and the appropriate mode key until the light blinks twice: MENU there is no guarantee that interference will not occur (AUX, VCR, TV, or CBL) at the same time N EXIT • To disable channel controls for a TV, press E in a particular installation. If this equipment does until the light blinks twice. X + SELECT and TV at the same time. T cause harmful interference to radio or television FA 4. Using the keypad on the remote, press 9 9 3. P SELECT V • To disable channel controls for a VCR, R reception, which can be determined by turning the The light blinks twice. E – press SELECT and VCR at the same time. V TE LAS equipment off and on, the user is encouraged to try U T 5. Do you want the Volume and Mute keys to M to correct the interference by one or more of the • To disable channel controls for both the operate a single device all the time? following measures: TV and the VCR, press SELECT and CBL INFO + • If yes, press the mode key for the device at the same time. + • Reorient or relocate the receiving antenna. VOL CH that you want to control the volume. • To disable channel controls for a TV or a • Increase the separation between the equipment – – • If no, press VOL- to control the volume VCR that is assigned to the AUX mode key, and the receiver. through various devices based on the mode press SELECT and AUX at the same time. • Connect the equipment into an outlet on a key. 2. Using the keypad on the remote, press 9 9 7. A B C circuit different from that to which the receiver 6. Point the remote toward the device and 3. Press CH-. The light blinks twice to confirm 1 2 3 is connected. confirm that the Volume and Mute keys the change. • Consult the dealer or an experienced radio/TV function as expected. 4 5 6 technician for help. To enable channel controls in a mode (so that the channel keys in that mode control the appropriate Any changes or modifications not expressly Can I Reassign My Mode Keys? 7 8 9 device)... approved by Scientific-Atlanta could void the user’s PPV FAV You can program the TV, VCR, and AUX mode 1. Press one of the following key combinations 0 # authority to operate this equipment. * keys on your remote to control other devices. For until the light blinks twice: Explorer is a registered trademark of Scientific- example, you can program the AUX mode key to • To enable channel controls for a TV, press Atlanta, Inc. “Bringing the Interactive Experience control a second VCR device, such as a DVD player. Home” and VCR Commander are trademarks of SELECT and TV at the same time. 1. Turn on the device. Scientific-Atlanta, Inc. All other trademarks shown • To enable channel controls for a VCR, AS R YP S /VCR VC 2. Press SELECT and CBL at the same time until B TV are trademarks of their respective owners. press SELECT and VCR at the same time. the light blinks twice. • To enable channel controls for both the TV V O D 3. Using the remote control keypad, press 9 9 2. and the VCR, press SELECT and CBL at The mode keys blink twice. the same time. 4. Press the mode key that identifies the kind of • To enable channel controls for a TV or a the device you want to control, and then press VCR that is assigned to the AUX mode key, the mode key that you want to change. For press SELECT and AUX at the same time. example, to program the AUX key to operate a 2. Using the keypad on the remote, press 9 9 7. TV, press VCR and then press AUX. 3. Press CH+. The light blinks twice to confirm Repeat this procedure to reassign a key to its the change. default state. Instead of pressing two keys in step 4, United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway, Box 465447, press the key that you want to reassign twice: Lawrenceville, GA 30042 • To identify the kind of device you want to control © 2003 Scientific-Atlanta, Inc. All rights reserved. Printed in USA www.scientificatlanta.com • To identify the mode key that you want to 7 Part Number 749221 Rev C March 2003 change About Your Remote Setting Up Your Remote Your new AT2400 AllTouch® Remote Control How Do I Program the Mode Keys? What If None Of the Codes Work? the same time, regardless of the current mode. (“remote”) functions as four remotes in one to To change your power control: operate your TV, VCR, cable set-top device, or The mode keys are the four buttons arched across If none of the codes listed for your device work, 1. Press SELECT and CBL at the same time CD or DVD player. If you prefer, you can the top of the remote. These buttons are labeled you can search through the code library for a valid until the light blinks twice. program the AT2400 AllTouch Remote Control AUX, VCR, TV, and CBL and let you specify the code. 2. Using the keypad on the remote, press to operate additional electronic devices, such as a device you want to control when you are using 1. Turn on the device. stereo receiver, an amplifier, or a home automa- 9 9 8. the remote. For example, to turn on your TV, 2. Press SELECT and a mode key (AUX, VCR, tion device. you would press TV and then press POWER. TV, or CBL) at the same time until the light 3. Press one of the following keys to choose For information about the keys on the remote, go blinks twice. For example, to search for a TV the way the Power key operates: to the Quick Reference section of this guide. code, press SELECT and TV at the same time. • Press TV if you want the Power key to Note: If you have questions or concerns about 3. Using the keypad on the remote, press 9 9 1. turn on the set-top and the TV. The light blinks once. the operation of this remote, contact your cable • Press VCR if you want the Power key 4. Point the remote toward the device, and press service provider. V to turn on the set-top, the TV and the C T V POWER. A R C VCR. U B Batteries X L 5. Did the device turn off? S • Press AUX if you want the Power key ING POWER TT E • If yes, press SELECT to confirm the code. The remote requires two AA batteries (alkaline S GUIDE to turn on the set-top, the TV and the MENU N • If no, press ! to go to the next code, and auxiliary device. recommended). When batteries are properly EXIT installed, the light on the remote blinks each time then press POWER to try again. • Press CBL if you want the Power key a button is pressed. To test a mode key, turn on a device, press the Note: Each code library contains the following to turn on the set-top, the TV, the Important Reminder: A diagram in the battery mode key for that device, and then press PLAY, number of codes: VCR, and the auxiliary device.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    2 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us