OMNIKEY® 5X27CK KEYBOARD WEDGE CONFIGURATION AND CUSTOM REPORT USER GUIDE 5127-902, Rev E.3 November 2019 hidglobal.com Copyright © 2011 - 2019 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks HID Global, HID, the HID Brick logo, the Chain Design, HID Mobile Access, Indala, iCLASS, iCLASS SE, Seos and OMNIKEY are the trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. MIFARE, MIFARE Classic, MIFARE DESFire, MIFARE DESFire EV1/EV2, and MIFARE Ultralight are registered trademarks of NXP B.V. and are used under license. Revision History Date Description Version November 2019 Added OK5127CK Reader Core information. Added note at end of E.3 section 2.2.5. Added extra configuration examples in section 6. January 2019 Added information to support Service Pack 2 (FW 01.02.00f7) E.2 January 2018 Added information on OK5425 Gen2 and OK5127 Mini SP1 E.1 March 2016 Added information on OK5127CK-Mini. E.0 December 2014 Extra detail added to tech order setting. D.3 Contacts For additional offices around the world, see www.hidglobal.com/contact/corporate-offices Americas and Corporate Asia Pacific 611 Center Ridge Drive 19/F 625 King’s Road Austin, TX 78753 North Point, Island East USA Hong Kong Phone: 866 607 7339 Phone: 852 3160 9833 Fax: 949 732 2120 Fax: 852 3160 4809 Europe, Middle East and Africa (EMEA) Brazil Haverhill Business Park Phoenix Road Condomínio Business Center Haverhill, Suffolk CB9 7AE Av. Ermano Marchetti, 1435 England Galpão A2 - CEP 05038-001 Lapa - São Paulo / SP Phone: 44 (0) 1440 711 822 Brazil Fax: 44 (0) 1440 714 840 Phone: +55 11 5514-7100 HID Global Technical Support: www.hidglobal.com/support 2 November 2019 Contents Chapter 1: Overview . 7 1.1 References. 7 1.2 Abbreviations and definitions . 8 1.3 Firmware version information . 8 1.4 Supported RFID technologies. 9 1.4.1 LF technologies (125 kHz) . 9 1.4.2 HF technologies (13.56 MHz) . 9 1.4.3 Bluetooth support (OK5127CK-Mini, OK5427 Gen 2, and OK5127 Reader Core) . 10 1.5 Modes of operation . 10 1.5.1 Ethernet Emulation Mode (EEM) . 10 1.5.2 CCID . 11 1.5.3 Keyboard Wedge . 12 1.5.4 Custom Report . 12 Chapter 2: Reader web-based management tool interface . .13 2.1 Setup . 13 2.1.1 Ethernet Emulation Mode . 13 2.1.2 Web browser . 14 2.2 Navigating the Reader Management Tool . 14 2.2.1 Accessing the web interface. 14 2.2.2 Navigating the tabs. 15 2.2.3 Changing settings . 16 2.2.4 Downloading and uploading configurations . 17 2.2.5 Setting a web server password . 19 2.3 Card type processing priority . 20 2.4 Polling configuration. 21 Chapter 3: Keyboard wedge mode . 23 3.1 Card In event . 24 3.1.1 Card Out event . 24 3.2 Navigating the Keyboard Wedge configuration tabs . 25 3.3 General Config tab. 26 3.3.1 KBW Enable options. 26 3.3.2 Global keystroke events . 27 3.3.3 Keyboard options . 28 3.3.4 Keyboard wedge encryption . 29 3.4 Card Data Selection tab . 30 November 2019 3 5127-902, Rev E.3 3.4.1 Configure data fields for each card type.. 31 3.5 Data manipulation . 32 3.6 Input Data Manipulation tab . 33 3.6.1 PACS Leading Byte. 33 3.6.2 Binary Reverse . 33 3.6.3 Byte Reverse . 34 3.6.4 Bit Padding . 35 3.6.5 Logic Operations. 35 3.6.6 Out 1 Data Manipulation tab . 36 3.6.6.1 String Format . 36 3.6.6.2 String Filtering. 36 3.6.6.3 String Truncating . 37 3.6.7 Out 2 Data Manipulation tab. 38 3.6.7.1 String Padding. 38 3.6.7.2 Pre- and Post-strokes . 38 3.7 Supported keystroke & command characters . 39 3.7.1 Supported printable characters . 39 3.7.2 Pre- and post-stroke supported control characters . 39 3.7.3 Extended ASCII Character Set (OK5427 Gen2/OK5127CK Mini/ OK5127CK Reader Core onwards) . 42 3.7.4 Reader command keystrokes (controlling reader behavior) . 42 3.7.4.1 [PAUSE xxx] . 42 3.7.4.2 [LED_BUZZ] . 43 3.8 Secure messaging on MIFARE DESFire EV2 . 43 3.9 Keyboard Wedge output via UART . 43 3.10 Maximum output size . 44 Chapter 4: Custom Report mode . 45 4.1 Example Custom Report output across USB HID interface . 45 4.1.1 Output example: . 47 Chapter 5: Additional settings . 49 5.1 LEDs & buzzer . ..