National Park Rules to Protect Character

National Park Rules to Protect Character

A Guide to National Park Rules to Protect Character Views of Tongariro National Park Alpine Character along State (Ruapehu District Plan Rules) Views from the State Highway to the east of National Highway Park Village are protected through a limit on the New buildings alongside the State Highway (between height of trees and buildings on rural land (hatched Waimarino-Tokaanu Road and Carroll Street) are area on map). required to incorporate an alpine character in their This rule recognises that this view is nationally design (dark blue on map). significant and has a real influence on the character The colour of buildings, landscaping of the site and of National Park. any new signage will also be considered. Please contact Council if you are looking to build within this area and would like more information around these rules. Ruapehu District Council Private Bag 1001, Taumarunui, 3946 59-63 Huia Street, Taumarunui 3920 Phone (24 Hours) 07 895 8188 Taumarunui 06 385 8364 Ohakune 06 385 4447 Raetihi Fax 07 895 3256 Email [email protected] Website www.ruapehudc.govt.nz Facebook ruapehudc The information in this brochure is a guide only and is not a statutory document. The information in this brochure is a guideDecember only and 2016 is not a statutory document Version 5- April 2016 Fences Diagram 1: Maximum fencing heights Within the Residential Zone in National Park there are rules controlling the height of fences. These rules are as follows: • The maximum height of any: » Front boundary fence or wall; and » Any side boundary fence or wall located in front of the dwelling on front sections (see diagram 2) shall not exceed: (1) 1.2m in height, or (2) 1.6m in height where any fencing above 1.2m in height is visually permeable (that being 50% of the area is not obscured by fencing materials). This could be materials such as trellising or slats (see diagram 1) These rules are not retrospective. If you have an existing fence that is higher than this, you do not need to make any changes. Diagram 2: Fencing requirements for front The intention of these rules is to ensure that, within residential areas, fences along the front of properties Front boundary (roadway) fences Roadway shall not exceed 1.2m or 1.6m are relatively low (1.2m or less) or, if the fence is with permeable materials higher than this (up to 1.6m), the fence can be seen Side boundary fences from through. Low fencing helps to contribute to safer the front of the dwelling to the neighbourhoods by allowing residents to see what boundary line on front sections shall not exceed 1.2m or 1.6m is happening on their streets. This is particularly with permeable materials Dwelling important in National Park due to the high transient population and low occupancy rates of dwellings. It Rear boundary fences and those also helps to retain a residential character by ensuring behind the front of the building shall not exceed 2m that streets are not dominated by fences..

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    2 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us