Hanwha Total PP TB52 Compounded Polypropylene Hanwha Total Petrochemical Co., Ltd. www.ulprospector.com Technical Data Product Description Description Manufactured by adding an inorganic filler, talc to polypropylene, Hanwha Total' s heat-resistant PP compounds are designed for use in injection molding, and feature highly improved strength and heat-resistance. Produced with a variety of base PPs, such as HIPP (High Isotactic or High Crystalline Polypropylene), Hanwha Total' special processing technology results in PP of the highest quality. These products feature superior rigidity and impact strength, long-term heat resistance and anti-static property. Dimensional stability is another plus! These Hanwha Total products are widely used in electric and electronic parts, household appliances and automobiles. Characteristics • Addition of an inorganic filler, talc enhances heat-resistance and dimensional stability; • Superior strength and impact-resistance; • Superior processability. Applications • Electric/electronic products • Dish washer and microwave oven parts such as doors, air covers, air ducts; • Washing machines parts (such as balances), and TV speaker cabinets; • Household goods such as food containers. General Material Status • Commercial: Active Literature 1 • Technical Datasheet (English) UL Yellow Card 2 • E140331-222954 Search for UL Yellow Card • Hanwha Total Petrochemical Co., Ltd. Availability • Asia Pacific • North America Filler / Reinforcement • Talc • Antistatic • High Heat Resistance Features • Excellent Processability • High Impact Resistance • High Strength • Good Dimensional Stability • High Rigidity • Appliances • Electrical Parts • Food Containers Uses Automotive Applications • Electrical/Electronic Household Goods • Applications • Processing Method • Injection Molding Physical Nominal Value Unit Test Method Density 1.04 g/cm³ ASTM D1505 Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) 11 g/10 min ASTM D1238 Molding Shrinkage - Flow (2.00 mm) 1.0 to 1.4 % Internal Method Mechanical Nominal Value Unit Test Method Tensile Strength 4 (Yield) 34.3 MPa ASTM D638 Tensile Elongation 4 (Break) 60 % ASTM D638 Flexural Modulus 5 2450 MPa ASTM D790 Impact Nominal Value Unit Test Method Notched Izod Impact (23°C) 49 J/m ASTM D256 Hardness Nominal Value Unit Test Method Rockwell Hardness (R-Scale) 93 ASTM D785 Thermal Nominal Value Unit Test Method Deflection Temperature Under Load ASTM D648 0.45 MPa, Unannealed 139 °C Flammability Nominal Value Unit Test Method Flame Rating HB UL 94 1 of 3 Form No. TDS-82754-en UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, March 6, 2018 UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: March 2005 Last Updated: 11/29/2016 The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. Hanwha Total PP TB52 Compounded Polypropylene Hanwha Total Petrochemical Co., Ltd. www.ulprospector.com Injection Nominal Value Unit Rear Temperature 180 to 200 °C Middle Temperature 190 to 210 °C Front Temperature 200 to 220 °C Mold Temperature 50 to 80 °C Injection Pressure 39.2 to 88.3 MPa Holding Pressure 58.8 to 98.1 MPa Screw Speed 30 to 80 rpm Notes 1 These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature from the supplier. 2 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search. 3 Typical properties: these are not to be construed as specifications. 4 50 mm/min 5 5.0 mm/min 2 of 3 Form No. TDS-82754-en UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, March 6, 2018 UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: March 2005 Last Updated: 11/29/2016 The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. Hanwha Total PP TB52 Compounded Polypropylene Hanwha Total Petrochemical Co., Ltd. www.ulprospector.com Where to Buy Supplier Hanwha Total Petrochemical Co., Ltd. Seoul, South Korea Telephone: +82-2-3415-9408 Web: http://www.hanwha-total.com/ Distributor CISKO Plastics (HK) Limited Telephone: +86-18027555338 Web: http://www.ciskoplas.en.ec21.com Availability: China 3 of 3 Form No. TDS-82754-en UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved. Document Created: Tuesday, March 6, 2018 UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com. Added to Prospector: March 2005 Last Updated: 11/29/2016 The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content..