REMOTE CAMERA CONTROLLER RM-LP100U RM-LP100E INSTRUCTIONS . Specifications and appearance of this unit are subject to change for further improvement without prior notice. Details For details on settings and operation, refer to “INSTRUCTIONS” on the website. Please check the latest INSTRUCTIONS, tools, etc. from the URL below. North America: http://pro.jvc.com/prof/main.jsp Europe: http://www.service.jvcpro.eu/public/ China: http://www.jvc.com.cn/service/download/index.html Thank you for purchasing this product. Before beginning to operate this unit, please read the “INSTRUCTIONS” carefully to ensure proper use of the product. In particular, please read through the “Safety Precautions” to ensure safe use of the product. After reading, store them with the warranty card and refer to them whenever needed. The serial number is crucial for the purpose of quality control. After purchasing this product, please check to ensure that the serial number is indicated correctly on this product, and the same serial number is also indicated on the warranty card. Please read the following before getting started: Thank you for purchasing this product. Before operating this unit, please read the instructions For Customer Use: carefully to ensure the best possible performance. Enter below the Serial No. which is located on the body. Retain this information for future reference. In this manual, each model number is described without the last letter (U/E) which means the shipping destination. Model No. RM-LP100U (U: for USA and Canada, E: for Europe) Serial No. Only “U” models (RM-LP100U) have been evaluated by UL. IM 1.01 B5A-1936-00 Safety Precautions Cautions Getting Started WARNING: CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: This unit should be used withAC 120 VH, 60 Hz. To prevent electric shocks and fire hazards, DO NOT use any other power source. AVIS CAUTION: RISQUE DE CHOC ELECTRIQUE TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF - NE PAS OUVRIR. PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA The lightning flash with arrowhead symbol, within LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE an equilateral triangle, is intended to alert the user CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU to the presence of uninsulated “dangerous voltage” FOND. within the product’s enclosure that may be of sufficient magnitude to constitute a risk of Note to CATV system installer: electric shock to persons. The exclamation point within an equilateral triangle This reminder is provided to call the CATV system installer’s is intended to alert the user to the presence of attention to Article 820-40 of the NEC that provides guidelines important operating and maintenance (servicing) for proper grounding and, in particular, specifies that the cable instructions in the literature accompanying the ground shall be connected to the grounding system of the appliance. building, as close to the point of cable entry as practical. CAN ICES-3 A / NMB-3 A “WARNING” and the following or equivalent. “To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.” CAUTION: “ATTENTION” et suivant ou équivalent. “Pour limiter les risques d’incendie ou d’électrocution, n’exposez pas cet appareil à la A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS pluie ou à l’humidité.” UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE A warning that an apparatus with CLASS I construction shall be TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED. connected to a MAINS socket outlet with protective earthing WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO connection. NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO Avertissement: un appareil de CLASSE I doit être branché à une THE INSIDE OF THIS UNIT. prise SECTEUR comprenant une mise à la terre de protection. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE When the main plug or appliance coupler shall remain readily SPECIFIED HEREIN MAY RESULT IN HAZARDOUS operable. RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. MISE EN GARDE: CET APPAREIL EST UN PRODUIT LASER DE CLASSE 1. CEPENDANT, CET APPAREIL UTILISE UN FAISCEAU LASER VISIBLE QUI PEUT ENTRAÎNER UNE EXPOSITON DANGEREUSE AUX RAYONNEMENTS. S’ASSURER DE FAIRE FONCTIONNER L’APPAREIL CORRECTEMENT, EN RESPECTANT LES INSTRUCTIONS. LORSQUE CET APPAREIL EST BRANCHÉ À UNE PRISE MURALE, NE PAS PLACER SES YEUX PRÈS DE L’OUVERTURE DU TIROIR POUR DISQUE OU D’AUTRES OUVERTURES DANS LE BUT D’OBSERVER L’INTÉRIEUR DE L’APPAREIL. L’UTILISATION DES COMMANDES, RÉGLAGES OU PROCÉDURES DE PERFORMANCE AUTRE QUE CELLE SPÉCIFIÉE DANS CE DOCUMENT RISQUE D’ENTRAÎNER UNE EXPOSITION DANGEREUSE AUX RAYONNEMENTS. L’UTILISATEUR NE DOIT PAS OUVRIR NI RÉPARER L’APPAREIL DE LUI-MÊME. FAIRE APPEL À UN PERSONNEL QUALIFIÉ POUR L’ENTRETIEN. 2 IMPORTANT SAFETY INSTRUCTIONS CAUTION: Changes or modifications not approved by JVC could void user’s 1) Read these instructions. authority to operate the equipment. 2) Keep these instructions. 3) Heed all warnings. Declaration of Conformity 4) Follow all instructions. Model Number: RM-LP100U Getting Started 5) Do not use this apparatus near water. 6) Clean only with dry cloth. Trade Name: JVC 7) Do not block any ventilation openings. Install in accordance with Responsible Party: JVCKENWOOD USA Corporation the manufacturer’s instructions. Address: 1700 Valley Road Wayne, N.J. 07470 8) Do not install near any heat sources such as radiators, heat Telephone Number: 973-317-5000 registers, stoves, or other apparatus (including amplifiers) that This device complies with Part 15 of FCC Rules. produce heat. Operation is subject to the following two conditions: 9) Do not defeat the safety purpose of the polarized or grounding- (1) This device may not cause harmful interference, and (2) this type plug. A polarized plug has two blades with one wider than device must accept any interference received, including the other. A grounding type plug has two blades and a third interference that may cause undesired operation. grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into "This equipment has been tested and found to comply with the limits your outlet, consult an electrician for replacement of the for a Class A digital device, pursuant to Part 15 of the FCC Rules. obsolete outlet. These limits are designed to provide reasonable protection against 10)Protect the power cord from being walked on or pinched harmful interference when the equipment is operated in a particularly at plugs, convenience receptacles, and the point commercial environment. where they exit from the apparatus. This equipment generates, uses, and can radiate radio frequency 11)Only use attachments/accessories specified by the energy and, if not installed and used in accordance with the manufacturer. instruction manual, may cause harmful interference to radio 12)Use only with the cart, stand, tripod, communications. bracket, or table specified by the Operation of this equipment in a residential area is likely to cause manufacturer, or sold with the harmful interference in which case the user will be required to apparatus. When a cart is used, use correct the interference at his own expense." caution when moving the cart/apparatus combination to avoid injury from tip- When the equipment is installed in a cabinet or a shelf, make sure over. 13)Unplug this apparatus during lightning that it has sufficient space on all sides to allow for ventilation storms or when unused for long periods (10cm or more on both sides, on top and at the rear). of time. When discarding batteries, environmental problems must be 14)Refer all servicing to qualified service personnel. Servicing is considered and the local rules or laws governing the disposal of required when the apparatus has been damaged in any way, these batteries must be followed strictly. such as power-supply cord or plug is damaged, liquid has been Use the supplied power cord. spilled or objects have fallen into the apparatus, the apparatus (If not, fire or electric shock may be caused.) has been exposed to rain or moisture, does not operate DON'T continue to operate the equipment if you are in any doubt normally, or has been dropped. about it working normally, or if it is damaged in any way^switch Failure to heed the following precautions may result in off, withdraw the mains plug and consult your dealer. damage to the unit, remote control or disc/cassette. DO be careful with glass panels or doors on equipment. 1. DO NOT place the unit^ DO consult you dealer if you are ever in doubt about the ^ in an environment prone to extreme temperatures or installation, operation or safety of your equipment. humidity. NEVER let anyone especially children push anything into holes, ^ in direct sunlight. slots or any other opening in the case^this could result in a fatal ^ in a dusty environment. electrical shock. ^ in an environment where strong magnetic fields are generated. MOISTURE CONDENSATION ^ on a surface that is unstable or subject to vibration. Moisture in the air will condense on the unit when you move it from 2. DO NOT block the unit’s ventilation openings or holes. a cold place to a warm place, or under extremely humid (If the ventilation openings or holes are blocked by a newspaper conditions^just as water droplets form on the surface of a glass or cloth, etc., the heat may not be able to get out.) filled with cold liquid.