BORAL TIMBER Build something great™ Boral Parquetry AUSTRALIAN HARDWOOD SPECIES PEFC/21-31-38 Promoting sustainable forest management • Block parquetry is laid individually to create an attractive pattern. Contrasting coloured timber species can be used to create depth Standard sizing in the design. 260x65x18mm • Parquetry can be laid with strip flooring or a decorative border to create an interesting feature. Species • Boral Parquetry is a great solution for heavy traffic areas Available in a range of species including: such as halls, steps, entrance ways and commercial interiors. • Australian Beech • Blackbutt • If a small section is seriously damaged, it can be easily replaced • Ironbark After years of wear the entire floor can be restored by sanding • Spotted Gum and refinishing. • Tallowwood • Boral Timber products are AFS Chain of Custody certified Other species may be available on request. providing peace of mind that Boral’s parquetry is sourced from sustainably managed and legal forestry. Grades Classic Grade • Boral Timber has a system that ensures strict tolerances and Natural grade may be available on request. drying procedures to produce a sound product. • The Boral Installation Guide, building codes and Australian Standards should be adhered to when installing Boral Parquetry. Block parquetry can be laid in many attractive patterns including ABBOTT BASKETWEAVE BRICKBOND HERITAGE HERRINGBONE SQUARE ON SQUARE BCC 16873 12. 19 Note: Variations of colour within a timber species are normal, therefore photographs, samples and displays can only be indicative of the colour range of the timber species nominated. Timber is a natural product and commonly reacts to changes in atmospheric and environmental conditions such as humidity and temperature. This is considered normal. www.boral.com.au/timber National free call 1800 818 317 Printed on recycled paper using vegetable inks. Boral® and Build something great™ are registered trade marks of Boral Limited or one of it’s subsidiaries..