TEMPERATURE VALVES Tempera Valve Precision Plumbing Products “Specify with Confidence - Install with Pride”® TEMPERA VALVE AUTOMATIC PRESSURE COMPENSATING ONLY ONE MOVING PART! www.pppinc.net SUCCESSFULLY COMPLETED 100,000 CYCLE TESTING! Part Number TRB-2 Rough Brass FEATURES: Part Number TCP-2 Polished Chrome - AUTOMATIC PRESSURE COMPENSATING, PREVENTING THERMAL SHOCK - CAN BE USED WITH SINGLE OR TWO HANDLE MIXING VALVE ASSEMBLIES. - HOLDS A SELECTED WATER TEMPERATURE TO WITHIN +_ 3º F DEGREES REGARDLESS OF PRESSURE CHANGE FULLY PORTED VALVE WITH MINIMAL PRESSURE DROP - SAFE AND POSITIVE BECAUSE IT IS A PRESSURE BALANCING VALVE, NOT A THERMOSTATIC MIXING VALVE - MEETS A.S.S.E. STANDARD 1066 INDIVIDUAL IN-LINE PRESSURE BALANCING VALVES ADVANTAGES: May be installed at any convenient, accessible point on the supply lines... in any position or angle. May be in- stalled in either exposed or concealed locations (Access door is required). Chrome plated models are available for exposed installations. INSTALLATION: Install the pressure balancing unit before the fixture and control valve. Specify theTempera Valve for use in homes, schools, gymnasiums, hotels, photographic darkrooms, barber shops...wherever a close control over water temperature is required. OPERATION: Fully automatic - no manual controls, regulating or adjustments are needed.With only one moving part, the TemperaValve is designed to equalize the hot and cold supply line pressures. The change in water pressure will not effect the preset temperature. ASSEMBLED IN ACCORDANCE WITH ANSI/ASME A112.1.2 AIR GAP IN PLUMBING SYSTEMS STANDARD Precision Plumbing Products U.S. PATENT NUMBER 4,926,897 Division of JL Industries, Inc. CANADIAN PATENT NUMBER 2,011,457 802 SE 199th Ave Portland, Oregon 97233 T (503) 256-4010 MADE IN U.S.A. F (503) 253-8165 We do not export jobs www.pppinc.net Rev 01/14 TEMPERATURE VALVES Tempera Valve Precision Plumbing Products “Specify with Confidence - Install with Pride”® TS91-0293 TEMPERA VALVETEMPERA VALVE CONNECTIONS www.pppinc.net 1/2" FPT The Tempera Valve is a highly sensitive pressure balancing valve that holds a selected water temperature to within one degree. It responds instantly to all line pressure loss on either the hot or 3 1/8" cold side. O.A.H. 5/16” Tempera Valves may be installed Hex in any position or at any angle. They must be installed ahead of the control valve(s). The flow pattern is indicated by arrows imprinted in the valve body. 2 5/16" Tempera Valves should be 3 7/8" provided with some type of access for servicing if necessary. Prevents Thermal Shock Avoid high temperatures Tempera Valve Flow Rate in direct contact with the 12.0 valve body. 11.0 The internal parts of the Tempera Valve are 10.0 stainless steel with only one 9.0 moving part. The pressure differential sensing piston is 8.0 constantly responding to any system pressure changes. 7.0 6.0 We require only Teflon tape be used for the female 5.0 N.P.T. pressure connection. Flow (gpm) 4.0 Pipe dope and liquid thread sealants will affect the 3.0 balance valves operation. Failure to follow these 2.0 instruction will void any 1.0 product warranty. 0.0 0 10 15 20 30 40 50 55 60 70 80 90 100 The Tempera Valve was cold water supply failure °Flow (gpm) 0.0 4.2 5.1 7.1 8.8 9.8 10.5 11.1 11.3 11.1 11.2 11.3 tested and reduced flow to 0.5 gpm in one (1) second. Static Supply Pressure (psig).