2.4 GHz WIRELESS VIDEO SENDER SYSTEM MODEL: VS6367 Please read this manual thoroughly before operating this system This product broadcasts over public airwaves and its video and audio signals may be intercepted without your consent. OPERATING INSTRUCTIONS 06/03 SAFETY INSTRUCTIONS CAUTION IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the RISK OF ELECTRIC SHOCK. DO NOT OPEN. ! appliance is operated and retained for future reference. CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 1. HEED WARNINGS - All warnings on the appliance and in the operating COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. instructions should be adhered to. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 2. FOLLOW INSTRUCTIONS - All operating instructions should be followed. Explanation of two Symbols 3. WATER AND MOISTURE - Do not use this video product near water - The lightning flash with arrowhead symbol, within an equilateral for example, a bath tub, wash bowl, kitchen sink, laundry tub or swimming triangle, is intended to alert the user to the presence of uninsulated pool, or in a wet basement. "dangerous voltage" within the product's enclosure that may be of 4. POWER SOURCES - This product should be operated only from the type sufficient magnitude to constitute a risk of electric shock to persons. of power source indicated on the marking label. The exclamation point within an equilateral triangle is intended to 5. OVERLOADING - Do not overload outlets and extension cords, which alert the user to the presence of important operating and maintenance- can result in a risk of fire or electric shock. ! (servicing) instructions in the literature accompanying the appliance. 6. SERVICING - Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON Refer all servicing or repairs to qualified service personnel. THE BOTTOM OF THE SYSTEM. 7. DAMAGE REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing or repairs to qualified service personnel under the following WARNING: To prevent fire or shock hazard, do not expose this conditions： a. When the power supply cord or plug is damaged. appliance to rain, water, or wet locations. Do not b. If liquid has been spilled or objects have fallen into the product. insert any metallic object through the ventilation grills. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. IMPORTANT SAFETY INSTRUCTIONS: e. If the product has been dropped or the cabinet has been damaged. This wireless Audio/Video equipment is provided with a polarized alternating- f. When the product exhibits a distinct change in performance. current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 1 2 Congratulations on your purchase of the Deluxe Lorex 2.4 GHz 8. REPLACEMENT PARTS - When replacement parts are required, be sure the Wireless Video Sender System with IR extender. This system easily service technician has used replacement parts that are specified by the manufacturer connects to any T.V., allowing you to view your Satellite, DVD or or have the same characteristics as the original part. Unauthorized substitutions Security Camera from another room, of up to 300ft distance (open may result in fire, electric shock, or other hazards. space). The system also integrates an IR extender which allows you to 9. SAFETY CHECK - Upon completion of any service or repairs to this video control the audio or video source from another room using your existing product, ask the service technician to perform safety checks to determine if the TV or VCR remote control. video product is in proper operating condition. 10. An appliance and cart combination should be moved with care. CHAPTER TABLE OF CONTENTS PAGE Do not place this equipment on an unstable cart, stand, or table. The equipment 1. CONTROLS AND FUNCTIONS may fall, causing serious injury to a child or adult, and serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's instructions WIRELESS SENDER ........................……………………..…..….…...................5 and should be done with a mounting kit approved by the manufacturer. WIRELESS RECEIVER ......................................…........………………..……….6 2. INSTALLATION OF WIRELESS SENDER …...…............……….....…......…...7 FCC CLASS B NOTICE 3. INSTALLATION OF WIRELESS RECEIVER Note: OPERATION WITH TV (USING RCA CABLES) ……...…………..…..………8 This equipment has been tested and found to comply with the limits For a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to OPERATION WITH TV (USING COAXIAL CABLES) ...…...…………......….9 provide reasonable protection against harmful interference in a residential OPERATION WITH TV & VCR …............................…….……………............10 installation. This equipment generates, Uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause 4. SYSTEM OPERATION harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause USING THE IR EXTENDER REMOTE CONTROL FEATURE ....……..……11 harmful interference to radio or television reception, (which can be determined by HOW TO USE THE IR EXTENDER ACCESSORY ................………….….…12 turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures: 5. TROUBLE SHOOTING ..................................................…………………........ 13 6. SPECIFICATIONS …...……………………………………….……….…..……14 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. To learn more about this product and for a complete • Consult the dealer or an experienced radio or television technician for help. • Complies with Canada 210 listing of Lorex products, please visit us at: www.strategicvista.com 3 4 CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS WIRELESS SENDER WIRELESS RECEIVER SENDER FRONT & SIDE SENDER BACK RECEIVER FRONT & SIDE RECEIVER BACK 3 1 8 7 4 2 6 3 7 9 5 10 6 5 1 4 8 2 1. 2.4 GHz PATCH ANTENNA 7. AUDIO OUTPUT JACKS 1. CHANNEL SELECTOR SWITCH 6. AUDIO INPUT JACKS High gain patch antenna receives R (RED) & L (WHITE) Used to manually select channel R (RED) & L (WHITE) audio and video signal from the RCA jacks for Audio output connector. settings 1-4. RCA jacks for audio input connector. wireless sender. (when using RCA connector) 2. CHANNEL SELECTOR SWITCH 8. CHANNEL 3/4 SELECTOR SWITCH 2. ON/OFF POWER SWITCH 7. IR EXTENDER INPUT Used to view picture on television ON/OFF power Switch: Connection for the IR extender Used to manually select channel NOTE settings 1-4. when using Coaxial cable (preset Ensure this switch is set to OFF accessory. to channel 3). before plugging the system into 3. ON/OFF POWER SWITCH an electrical outlet. 8. POWER INDICATOR ON/OFF power switch: 9. POWER INDICATOR Shows system status. NOTE Ensure this switch is set to OFF Shows system status. 3. 2.4 GHz PATCH ANTENNA before plugging the system into High gain patch antenna sends an electrical outlet. 10. IR RECEIVER FOR REMOTE audio and video signals to the CONTROL wireless receiver. 4. RF OUT JACK Receives remote control signal from Used to connect the receiver to a the video source. 4. DC IN JACK TV using the supplied coaxial cable. Power source for the sender. 5. DC IN JACK 5. VIDEO INPUT JACK (YELLOW) Power source for the receiver. RCA jack for video input connector. 6. VIDEO OUTPUT JACK (YELLOW) RCA jack for Video output connector. (when using RCA connector) 5 6 INSTALLATION OF SENDER INSTALLATION OF RECEIVER CONNECTING A TRANSMITTER SIGNAL FROM YOUR CONNECTING A RECEIVER TO A T.V. USING RCA CABLES VCR/SATELLITE/DVD STEP 2: STEP 1: You have two options to connect the Receiver: A) Using RCA Cables (see below; or B) Using Coaxial Cables, please refer to page 9 of this manual. A) (SUPPLIED) (SUPPLIED) VCR/SATELLITE/DVD (NOT SUPPLIED) Ensure the Power Switch on the Receiver is turned OFF prior to NOTE Ensure the Power Switch on the Sender is turned OFF prior to proceeding with the following steps. NOTE proceeding with the following steps. 1. Place the wireless receiver near your television (or monitor). 2. Connect one end of the RCA cables to the Audio/Video jacks at the back 1. Connect one end of the RCA cables to the Audio/Video jacks of the of the Receiver. Plug the other end of the RCA cables into the Audio/Video Sender; the other end to the Audio/Video Out jacks of the VCR/Satellite/DVD. In jacks on your television. Be sure the yellow, red and white plugs match Ensure that the yellow, red and white plugs match the yellow, red and white jacks the yellow, red and white jacks on both the receiver and TV. on both the VCR/Satellite/DVD and the Sender. 3. Connect one end of the supplied 9V 500 mA AC Adapter into the back of 2. Plug one end of the supplied AC Adapter (9V 500 mA adapter) into the back of the receiver; the other end into an electrical outlet. Turn the receiver ON. the sender; the other end into an electrical outlet. The system is defaulted to The system is defaulted to channel 1.