PACK 4 BUILD THE T-800 1:2 SCALE The Most Legendary cyborg In Science Fiction History! T1, THE TERMINATOR, ENDOSKELETON, and any depiction of Endoskeleton are trademarks of Studiocanal S.A.S. All Rights Reserved. © 2020 Studiocanal S.A.S. ® All Rights Reserved. BUILD THE T-800 PACK 4 CONTENTS T-800 ASSEMBLY: STAGES 31– 40 STAGE 31: FIT LEFT SHOULDER ACCESSORIES AND ADD JOINT FOR THE RIGHT SHOULDER ................................................................................... 3 STAGE 32: COMPLETE A HINGE JOINT ON THE RIGHT SHOULDER ......................... 7 STAGE 33: LEFT SHOULDER DETAILS ...................................................................... 11 STAGE 34: THE FIRST VERTEBRA ............................................................................ 15 STAGE 35: WORKING ON THE THORACIC VERTEBRA ........................................... 19 STAGE 36: BUILDING THE NEXT THORACIC VERTEBRA ...............................................23 STAGE 37: COMPONENTS FOR THE THORACIC CAGE JOINT AND VERTEBRA .... 27 STAGE 38: COMPONENTS FOR THE THORACIC CAGE JOINT AND VERTEBRA .... 31 STAGE 39: CONNECTING THE RIGHT AND LEFT SHOULDERS ............................... 35 STAGE 40: CREATING THE THORACIC CAGE ......................................................... 39 SCI-FI CINEMA: CYBORGS AND ROBOTS .............................43 REAL-WORLD SCIENCE .........................................................46 IDENTIFYING YOUR COMPONENTS: Each of your Terminator packs is divided into stages. Each stage contains a number of components, and can be identified by referring to the images in your assembly guide or the number located on the sticker on the back of each stage. Each number begins with ‘77’ and is followed by a further three digits. The last three digits indicate the number of each stage. For example, 77 001 indicates stage 01, 77 002 indicates stage 02, etc. Find more helpful building tips and advice at community.agoramodels.com CUSTOMER SERVICE T1, THE TERMINATOR, ENDOSKELETON, and any depiction of For customer services, please Endoskeleton are trademarks of Studiocanal S.A.S. All Rights Reserved. visit www.agoramodels.com © 2020 Studiocanal S.A.S. ® All Rights Reserved. © 2020 Hachette Partworks Ltd. North America Edition by Agora Models Brought to you by: ALL RIGHTS RESERVED The editor’s policy is to use papers that are natural, renewable and recyclable products and made from wood grown in sustainable forests. The logging and manufacturing processes are expected to conform to the environmental regulations of the country of origin. Not suitable for children under the age of 14. This product is not a toy and is not designed for use in play. Keep the parts out of the reach of small children. Some parts may have sharp edges. Please handle them with care. T-800 ASSEMBLY 3 STAGE 31: FIT LEFT SHOULDER ACCESSORIES AND ADD JOINT FOR THE RIGHT SHOULDER In this stage, you’ll add the left shoulder blade, along with other shoulder accessories, and assemble part of the right shoulder joint. 31-1 31-3 31-6 31-7 31-5 31-2 31-4 LIST OF PIECES 31-1 Left shoulder blade 31-5 Left shoulder accessory YOU WILL ALSO NEED 31-2 Left shoulder blade fixing shaft 31-6 Right shoulder joint Superglue and a cocktail stick or toothpick with which to apply it. 31-3 Left shoulder blade fixing cap 31-7 Right shoulder insert Left shoulder assembly from stage 30 31-4 Plastic liner 4 T-800 ASSEMBLY 31-4 31-4 FROM Stage 30 STEP 1 STEP 2 Take the left shoulder assembly from stage 30. Fit the plastic liner 31-4 Push the liner 31-4 into the socket so that it is flush with both ends of the into the socket on the side of the shoulder assembly. socket. 31-1 STEP 3 STEP 4 Take the left shoulder blade 31-1 and fit it over the socket on the side Check that you have the shoulder blade the right way up. Note that the of the shoulder assembly. top of the shoulder blade is close to one of the raised details on the shoulder assembly (circled). T-800 ASSEMBLY 5 31-2 31-1 31-2 STEP 5 STEP 6 Take the left shoulder blade fixing shaft31-2 and slip it into the Ensure that the fixing shaft31-2 fits into the socket in the left shoulder shoulder blade joint. blade 31-1. 31-5 31-3 STEP 7 STEP 8 Fit the left shoulder blade fixing cap31-3 into the bottom of the After test-fitting, apply a little superglue to the recess on the shoulder shoulder blade joint. This is a push-fit connection. accessory 31-5. 6 T-800 ASSEMBLY 31-5 31-6 31-7 STEP 9 STEP 10 Fit the accessory 31-5 into the socket in the head of the shoulder After test-fitting, apply a little superglue to the four raised areas on the assembly. back of part 31-7. 31-6 31-7 STEP 11 STAGE COMPLETE Fit part 31-7 into part 31-6. The left shoulder blade has been fitted to the left shoulder, along with a small accessory. The right shoulder joint assembly will be fitted in a future stage. T-800 ASSEMBLY 7 STAGE 32: COMPLETE A HINGE JOINT ON THE RIGHT SHOULDER Fit the new parts to the right arm and shoulder assembly to create a shoulder hinge joint. 32-1 32-3 32-4 32-5 32-6 32-2 YOU WILL ALSO NEED LIST OF PIECES A cross head screwdriver. 32-1 Right shoulder end piece Allen key supplied earlier (Stage 26). 32-2 Right shoulder joint shaft Superglue and a cocktail stick or 32-3 Right shoulder joint cap toothpick with which to apply it. 32-4 Two Allen screws PM 3 x 10mm (1 spare) Shoulder joint assembly from stage 31 32-5 Right shoulder end piece insert Right arm assembly from stage 26 32-6 Three PM 3 x 6mm screws (1 spare) Right shoulder assembly from stage 28 8 T-800 ASSEMBLY 32-1 32-5 32-5 32-1 STEP 1 STEP 2 Take shoulder joint insert 32-5 and apply a little superglue to the four Fit part 32-5 into shoulder end piece 32-1. raised studs. FROM Stage 28 32-1 STEP 3 STEP 4 Take the right shoulder assembly from stage 28 and identify the fixing Fix the shoulder end piece 32-1 into the end of the shoulder assembly points (circled) for the shoulder end piece. using two PM 3 x 6 mm screws. T-800 ASSEMBLY 9 32-2 31-6 32-3 FROM Stage 31 STEP 5 STEP 6 Take the shoulder joint assembly from stage 31 and the right shoulder Fit the cap 32-3 into the shoulder joint assembly (31-6). joint cap 32-3. Note that the inner rims have flattened edges (arrows). 31-6 FROM Stage 26 32-3 STEP 7 STEP 8 Take the right arm assembly from stage 26. Check that you have it in the Fit the shoulder joint assembly (31-6/32-3) from step 6 into the socket correct orientation. in the top of the arm. 10 T-800 ASSEMBLY 32-2 STEP 9 STEP 10 Fit the head of the shoulder assembly from step 4 in between the two Fit the right shoulder joint shaft 32-2 through the right shoulder hinge parts of the hinge joint on the top of the arm, as shown. joint. 32-3 STEP 11 STAGE COMPLETE Fit an Allen screw (PM 3x10mm) through the shoulder joint cap 32-3 and The right shoulder assembly has been fitted to the top of the right arm, into the end of the shaft 32-2. Use the Allen key supplied with stage 26 forming a hinge joint. to tighten the screw. T-800 ASSEMBLY 11 STAGE 33: LEFT SHOULDER DETAILS The end of the left shoulder is fitted, together with a shoulder accessory. 33-3 33-1 33-4 33-2 33-5 33-6 LIST OF PIECES 33-1 Thoracic vertebra end piece 33-2 Left shoulder end piece YOU WILL ALSO NEED 33-3 Left shoulder accessory A cross head screwdriver. 33-4 Left shoulder accessory cap Superglue and a cocktail stick or 33-5 Left shoulder insert toothpick with which to apply it. Left shoulder assembly from stage 31 33-6 Three PM 3 x 6mm screws (1 spare) 12 T-800 ASSEMBLY 33-3 33-4 33-3 33-4 STEP 1 STEP 2 Cut the shoulder accessory parts 33-3 and 33-4 from the frame. Use a Apply a little superglue to the recesses in the cap 33-4. fine file to remove any rough edges. FROM Stage 31 33-3 33-4 STEP 3 STEP 4 Fit the cap 33-4 into the end of the shoulder accessory 33-3. After test-fitting to check the orientation (see step 5) apply a little superglue to the flange on the side of the left shoulder assembly from stage 31. T-800 ASSEMBLY 13 33-3 33-4 33-2 33-5 STEP 5 STEP 6 Fit the assembled shoulder accessory 33-3/33-4 from step 3 over the Apply a little superglue to the four studs on the shoulder insert 33-5. flange on the shoulder assembly. 33-5 33-2 STEP 7 STEP 8 Fit the shoulder insert 33-5 into the recess in the shoulder end piece Identify the fixing points in the end of the left shoulder assembly 33-2. (circled). 14 T-800 ASSEMBLY PM 3x6mm 33-2 STEP 9 Fit the shoulder end part 33-2 into the end of PM 3x6mm the shoulder assembly and fix in place with two PM 3 x 6 mm screws. STAGE COMPLETE! An end piece and an accessory have been fitted to the left shoulder. Part33-1 will be used in the next stage.