LI-ION 18V POWER TOOL SET 5PC INSTRUCTION MANUAL MODEL NUMBER BT-CK 18 2B-1.5 Kit AFTER SALES SUPPORT TEL: 1300 922 271 EMAIL: [email protected] N26704 1 POWER TOOL SET 5PC What your 3 year warranty means Great care has gone into the manufacture of these products and they should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 3 year after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product, please contact us via our after sales support services, details of which can be found in this manual and on the product itself. Welcome Section Congratulations on choosing to buy a TAURUS TITANIUM® product. All products brought to you by TAURUS TITANIUM® are manufactured to the highest standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 3 Year Warranty. We hope you will enjoy using your purchase for many years to come. Table of Contents 1. General Safety Rules 2. Battery Safety Rules Pg. 4 3. Charger Operating Instruction Pg. 5 3.1. Charger Safety Rules Pg 7 3.2. Layout Pg. 8 3.3. Technical data Pg. 8 3.4. Operation Pg. 8 3.5. Cleaning and maintenance Pg. 8 3.6. Disposal and recycling Pg. 9 4. Cordless Drill Operating Instructions Pg. 9 4.1. Cordless Drill Safety Rules Pg. 10 4.2. Layout/Items Supplied Pg. 12 4.3. Proper Use Pg. 12 4.4. Technical data Pg. 12 4.5. Before starting the equipment Pg. 12 4.6. Operation Pg. 13 4.7. Cleaning, maintenance and ordering of spare parts Pg. 13 4.8. Disposal and recycling Pg. 14 After Sales Support TEL: 1300 922 271 EMAIL: [email protected] 2 4.9 Storage Pg. 14 5. Cordless Circular Saw Operating Instructions Pg. 14 5.1. Cordless Circular Saw Safety Rules Pg. 15 5.2. Layout/Items Supplied Pg. 18 5.3. Proper Use Pg. 19 5.4. Technical data Pg. 19 5.5. Before starting the equipment Pg. 20 5.6. Operation Pg. 20 5.7. Cleaning, maintenance and ordering of spare parts Pg. 21 5.8. Disposal and recycling Pg. 22 5.9 Storage Pg. 22 6. Cordless Jigsaw Operating Instructions Pg. 22 6.1. Cordless Jigsaw Safety Rules Pg. 23 6.2. Layout/Items Supplied Pg. 25 6.3. Proper Use Pg. 26 6.4. Technical data Pg. 26 6.5. Before starting the equipment Pg. 26 6.6. Operation Pg. 27 6.7. Cleaning, maintenance and ordering of spare parts Pg. 27 6.8. Disposal and recycling Pg. 28 6.9 Storage Pg. 29 7. Cordless Reciprocating Saw Operating Instructions Pg. 29 7.1. Cordless Reciprocating Safety Rules Pg. 30 7.2. Layout/Items Supplied Pg. 31 7.3. Proper Use Pg. 31 7.4. Technical data Pg. 32 7.5. Before starting the equipment Pg. 32 7.6. Operation Pg. 32 7.7. Cleaning, maintenance and ordering of spare parts Pg. 33 7.8. Disposal and recycling Pg. 33 7.9 Storage Pg. 33 8. Cordless Lamp Operating Instructions Pg. 33 8.1. Cordless Lamp Safety Rules Pg. 34 8.2. Layout/Items Supplied Pg. 36 8.3. Technical data Pg. 36 8.4. Before starting the equipment Pg. 36 After Sales Support TEL: 1300 922 271 EMAIL: [email protected] 3 8.5. Operation Pg. 36 8.6. Cleaning, maintenance and ordering of spare parts Pg. 36 8.7. Disposal and recycling Pg. 36 8.8. Storage Pg. 37 Pg. 37 After Sales Support TEL: 1300 922 271 EMAIL: [email protected] 4 plugging in power tools that have the switch 1. GENERAL SAFETY RULES on invites accidents. WARNING! Read all instructions. Failure to d. Remove any adjusting key or wrench before follow all instructions listed below may result turning the power tool on. A wrench or a key left in electric shock, fire and/or serious injury. The attached to rotating part of the power tool may term ’’power tool’’ in all of the warnings listed result in personal injury. below refers to your mains-operated (corded) e. Do not overreach. Keep proper footing and power tool or battery-operated (cordless) power balance at all times. This enables better control tool. of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves SAVE THESE INSTRUCTIONS away from moving parts. Loose clothes, 1. Work area jewellery or long hair can be caught in moving parts. a. Keep work area clean and well lit. Cluttered and g. If devices are provided for the connection of dark areas invite accidents. dust extraction and collection facilities, ensure b. Do not operate power tools in explosive these are connected and properly used. Use of atmospheres, such as in the presence of these devices can reduce dust-related hazards. flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 4. Power tool use and care c. Keep children and bystanders away while a. Do not force the power tool. Use the correct operating a power tool. Distractions can cause power tool for your application. The correct you to lose control. power tool will do the job better and safer at the 2. Electrical safety rate for which it was designed. a. Power tools plugs must match the outlet. b. Do not use the power tool if the switch does not Never modify the plug in any way. Do not use turn it on and off. Any power tool that cannot be any adapter plugs with earthed (grounded) controlled with the switch is dangerous and must power tool. Unmodified plugs and matching be repaired. outlets will reduce risk of electric shock. c. Disconnect the plug from the power source b. Avoid body contact with earthed or grounded and/ or the battery pack from the power tool surfaces such as pipes, radiators, ranges and before making any adjustments, changing refrigerators. There is an increased risk of electric accessories, or storing power tools. Such shock if your body is earthed or grounded. preventive safety measures reduce the risk c. Do not expose power tools to rain or wet of starting the power tool accidentally. conditions. Water entering a power tool will d. Store idle power tools out of the reach of increase the risk of electric shock. children and do not allow persons unfamiliar d. Do not abuse the cord. Never use the cord with the power tool or these instructions to for carrying, pulling or unplugging the power operate the power tool. Power tools are tool. Keep cord away from heat, oil, sharp edges dangerous in the hands of untrained users. or moving parts. Damaged or entangled cords e. Maintain power tools. Check for misalignment increase the risk of electric shock. or binding of moving parts, breakage of parts e. When operating a power tool outdoors, use an and any other condition that may affect the extension cord suitable for outdoor use. Use of power tools operation. If damaged, have the a cord suitable for outdoor use reduces the risk power tool repaired before use. Many accidents of electric shock. are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly f. If operating a power tool in a damp location is maintained cutting tools with sharp cutting unavoidable, use a residual current device (RCD) edges are less likely to bind and are easier to protected supply. Use of an RCD reduces the risk of control. electric shock. g. Use the power tool, accessories and tool bits 3. Personal safety etc. in accordance with these instructions and a. Stay alert, watch what you are doing and use in the manner intended for the particular type common sense when operating a power tool. of power tool, taking into account the working Do not use a power tool while you are tired or conditions and the work to be performed. Use under the influence of drugs, alcohol or of the power tool for operations different from medication. A moment of inattention while those intended could result in a hazardous operating power tools may result in serious situation. personal injury. 5. Service b. Use safety equipment. Always wear eye a. Have your power tool serviced by a qualified protection. Safety equipment such as dust repair person using only identical replacement mask, non-skid safety shoes, hard hat, or hearing parts. This will ensure that the safety of the power protection used for appropriate conditions will tool is maintained. reduce personal injuries. c. Avoid accidental starting. Ensure the switch is in 6. Recommendation the off-position before plugging in. Carrying We recommend that the tool always be supplied power tools with your finger on the switch or via a residual current device with a rated residual current of 30mA or less. After Sales Support TEL: 1300 922 271 EMAIL: [email protected] 5 2. BATTERY SAFETY RULES 7. Do not exhaustively discharge batteries. Exhaustive discharge will damage the battery cells. The most common cause of exhaustive discharge is lengthy Battery tool use and care storage or non-use of partly discharged batteries. Stop a) Recharge only with the charger specified by the working as soon as the performance of the battery falls manufacturer.