OCE-0060L UR5U-8780L-TWC-UR5U-8790L-TWC Rev-22 102218.Pdf

OCE-0060L UR5U-8780L-TWC-UR5U-8790L-TWC Rev-22 102218.Pdf

1 Introduction 4 Button Functions A. Quick Setup Method VCR *Note : You can verify that you have selected the STEP1 Press the appropriate [DEVICE] button STEP1 Press the [CBL] button. *Note : To return TV device to CBL channel 6 Set­up Code Tables TV Operating Instructions For It’s easy to program the remote control to oper- Button Press Button Number Brand correct code by pressing the [POWER] and the [OK/SEL] button simultaneously STEP2 Press the [SYSTEM ON/OFF] button repeat steps above replacing [TV] with Manufacturer/Brand Set-Up Code Number button. The equipment should turn back for three seconds. The device LED will [CBL] in Step 3. TM ate your TV. Simply press the number buttons 0 0 MITSUBISHI and the [OK/SEL] button simultaneously CBL-CABLE Converters CENTURION 116 The CLIKR -5 UR5U-8780L & UR5U-8790L is on. Then try all of the functions on the turn on for 30 seconds. The next step TM designed to operate the CISCO / SA, Pioneer, through 9 that your TV brand is assigned to 1HP for 3 seconds. The [CBL] button will turn I. Programming a ‘Macro’ button. Manufacturer/Brand Set-Up Code Number CETRONIC 043 using the following four steps. remote control (i.e. volume, mute, etc.) to must be performed while the LED is on. on for 30 seconds. CHANGHONG 247 Pace Micro, Samsung and Motorola digital 2 PHILIPS If your remote model has custom-programmable CIELO 714 CLIKR -5 F ensure you have the correct code. If any MOTOROLA 002 148 206 3 JVC STEP2 Press the [INFO] button. The device LED set tops, Plus the majority of TV, VCR, DVD STEP1 Manually turn on the TV you wish to of the functions do not operate as they STEP3 Press the first [DEVICE] button you want Macro buttons available(See Section 4), they PACE 001 005 002 206 217 Ciil 732 and AUX equipment on the market as program. VCR&A 4 SAMSUNG will blink a number of times indicating to store in the [SYSTEM ON/OFF] button can be programmed to act as a ‘Macro’ or PIONEER 001 103 034 051 063 076 105 CITIZEN 116 002 003 363 043 258 143 5 PANASONIC should, repeat the instructions from SAMSUNG 001 030 CLARION 043 Cable Remote Control shown below. Button the number of each digit for the code. and then press [POWER]. Repeat this for Favorite Channel button in CABLE mode. This CLASSIC 043 STEP2 Press and hold simultaneously for 3 6 PHILIPS MAGNAVOX STEP 3 above using the next three digit SCIENTIFIC ATLANTA/CISCO 001 003 041 042 045 046 seconds both the TV and A (Yellow) Each digit is separated by a one second the other components you want to turn allows you to program up to five 2-digit channels, Amino 219 CLP CLASSIC 333 CBL : Cable Set-top Box TV : Televisions 7 TOSHIBA code number from the brand list. buttons or B (Blue) buttons, based interval of the LED being off. on/off with the [SYSTEM ON/OFF] button. four 3-digit channels or three 4-digit channels ARRIS 172 216 COBY 640 641 671 363 VCR : VCRs and TV/VCRs DVD : DVD Players 8 PIONEER Cincinnati Bell 220 COLORTYME 116 UR5U-8780L & UR5U-8790L on the column your TV brand is STEP4 Store the three-digit code by pressing Example : One blink, (pause) three blinks, 5 that can be accessed with one button press. Cox Digital Cable 223 CONCERTO 363 AUX : Audio Equipment, Media PC, etc. assigned to. The TV button LED light 9LG STEP4 Press the [CH ] button to save the the same [DEVICE] button once (pause) eight blinks indicates the power commands you stored. The STEP1 Press the [CBL] button to select the CBL Digital Multimedia Technology 222 CONCIERGE 073 will turn on for 30 seconds confirm- DVD again. The device LED will blink twice code number 138. Duoson 218 CONTEC 043 050 051 ing that you are in the program [CBL] button will blink twice to confirm mode. Entone 221 Continu-us 161 746 747 2 Replacing Batteries Button Press Button Number Brand to confirm that the code has been mode. *Note : Ten blinks indicates the number 0. the commands have been saved. STEP2 Press the [MACRO] button and EVOLUTION 189 215 CORNEA 116 Foxtel 228 CORONADO 143 0 HITACHI stored. Before you program or operate the remote control, STEP3 While the TV button LED is on, point E. Programming the AUX Device [OK/SEL] button simultaneously for 3 Horizon 225 CRAIG 043 054 you must install two new AA alkaline batteries. the remote control at the TV and 1 SONY G. Programming Volume Control seconds. The [CBL] button will turn Layer3 226 CROSLEY 164 2 PHILIPS You can take advantage of the AUX function to Pico Digital 224 CROWN 043 143 press the number button assigned to C. Auto Search Method Volume and Mute control are factory programmed on for 30 seconds. STEP1 Remove the battery compartment cover your TV brand as shown in the table 3 SAMSUNG program a devices such as a media PC, gam- Sky 240 241 CURTIS MATHES 116 258 363 143 If none of the three digit code numbers to automatically transfer to the respective Device TECHNICOLOR 365 CXC 043 on the back of your remote control. (e.g. for Sharp TV, button 5 ). The TV DVD&A 4 PHILIPS MAGNAVOX ing console or satellite radio receiver. Follow STEP3 Enter the the 2, 3 or 4-digit code for the assigned to your brand of equipment works, or the instruction in section B to program an AUX mode You select, as follows: channel you want programmed first (for WINDSTREAM 212 CYBERHOME 015 STEP2 Check battery polarity carefully, and should turn off. If it does not, press the Button 5 PANASONIC the code table does not list your brand, you can ZeeVee 227 DAEWOO 363 043 076 143 same number button repeatedly until 6LG device. You can also program the AUX button CBL :TV T V :TV VCR :TV example, 007) using the Number Pad, DAYTRON 363 143 use the Auto Search Method to find the correct install the batteries as shown in the the TV turns off. 7 JVC for a second TV, VCR or DVD player. To do this then press the [STOP] button. Then DELL 320 164 363 618 DVD :TV AUX :AUX CBL-IPTV DIGITAL PROJECTION 570 illustration below. 8 DENON three-digit code number for your equipment by follow the instructions below. enter the code for the next channel (for MEMORY BUTTONS If you wish to store the CBL volume control in DIMENSIA 333 STEP3 Replace the battery compartment cover. TRANSPORT KEYS *Note : The remote will exit the programming 9 PIONEER following steps: example, 050), then press the [STOP] Manufacturer/Brand Set-Up Code Number They’ve been programmed by the Cable MSO STEP1 Turn on the 5th device you want to CBL mode, use the following steps. DREAMVISION 235 to provide quick access to the most popular channels. mode automatically if it does not have STEP1 Turn on the equipment that you want button. Repeat this process for the third ADB 254 DUKANE 011 matching codes and the LED will turn off. AUX program (TV, VCR, DVD, etc.). DUMONT 116 073 the remote control to operate (Cable STEP1 Press the [OK/SEL] button and [CBL] channel. The [CBL] button will blink AMINO 260 Button Press Button Number Brand STEP2 Press the [AUX] button and the ENTONE 213 DURABRAND 096 052 STEP4 Once the TV has turned off, press the Box, TV, VCR, DVD, etc.). button simultaneously for three once for each channel entered. DWIN 257 [OK/SEL] button simultaneously for 3 MOTOROLA 253 TV button once again to save the 0 BOSE seconds. The device LED will turn on 5 DYNASTY 043 STEP2 Press the [DEVICE] button and the STEP4 Press the [CH ] button to store the DYNEX 400 code. The remote control is now 1HP seconds. The [AUX] device LED will for 30 seconds. The next step must [OK/SEL] button simultaneously for channels that were selected. The TV EIKI 187 ready to control your TV. 2 ONKYO turn on for 30 seconds. be performed while the LED is on. three seconds. The device LED will [CBL] button will blink twice to confirm Manufacturer/Brand Set-Up Code Number ELECTROBAND 001 Repeat the above steps for all other compo- 3 APPLE / iPod turn on indicating that it is ready to be STEP3 Press the [Device] button For the type of STEP2 Press the [VOL5] button. The device the storage of commands. ELECTROGRAPH 466 nents (TV, VCR, DVD, etc.). AUX&A 4 MICROSOFT / XBOX device you want to setup. Point the A MARK 112 143 ELECTROHOME 143 024 076 programmed. The LED will remain on LED will blink. ELEKTRA 072 5 SONY / PS2 To access the programmed channels, press ACCURIAN 036 Button remote control toward the device and ADMIRAL 072 251 333 ELEMENT 363 494 526 622 690 *Note : If the matching code could not be found in 6 LUTRON for 30 seconds. The next step must be STEP3 Press [CBL] button. The device LED will the [MACRO] button once. This will bring up STEP3, use 3-Digit Code Method or Auto entered while the LED is on. enter the 3-digit code number assigned blink twice to confirm the programming. AD NOTAM 672 EMERSON 028 048 043 116 363 050 051 076 096 143 154 052 514 7 X-10 to your brand. the first channel. Press once again and it will ADVENT 247 388 ENVISION 116 Search Method.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    2 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us