ZQ375 Checkweigher Service Manual AWT35-500813 Issue AB © Avery Weigh-Tronix, LLC 2012. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under license. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the Avery Weigh-Tronix, LLC. This publication was correct at the time of going to print however, Avery Weigh-Tronix, LLC reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. All third party brands and product names used within this document are trademarks or registered trademarks of their respective holders. ZQ375_s_en_500813.book Table of Contents page Chapter 1 General information and warnings ......................................................................................... 9 About this manual ..............................................................................................................9 Text conventions ......................................................................................................... 9 Special messages ....................................................................................................... 9 Installation ........................................................................................................................ 11 Torque specifications ................................................................................................ 11 Safe handling of equipment with batteries ................................................................ 12 Wet conditions ........................................................................................................... 12 Routine maintenance ....................................................................................................... 12 Cleaning the machine ...................................................................................................... 13 Training ............................................................................................................................ 13 Sharp objects ................................................................................................................... 13 FCC and EMC declarations of compliance ...................................................................... 13 United States ...................................................................................................... 13 Canada ............................................................................................................... 13 European Countries ............................................................................................ 13 Chapter 2 Introduction ............................................................................................................................ 14 Front panel ....................................................................................................................... 15 Annunciators ............................................................................................................. 17 Tolerance entry procedure ............................................................................................... 18 Example: To increase a value of 0.002 to 0.125: ................................................ 18 Numeric entry procedure ................................................................................................. 19 Example: To key in the number 507: .................................................................. 19 ID Entry Procedure .......................................................................................................... 19 Powering up the ZQ375 ................................................................................................... 20 Battery option ................................................................................................................... 20 Installation ................................................................................................................. 21 Battery charging and operation ................................................................................. 22 Checkweigher Operation on Battery Power ........................................................ 22 Accessing the menus ....................................................................................................... 23 Menu annunciators .......................................................................................................... 24 String index/character data entry ..................................................................................... 25 Exiting the menus ............................................................................................................ 26 Chapter 3 Introduction to the menus ..................................................................................................... 27 Quick Code parameter entry ............................................................................................ 28 Default Values .................................................................................................................. 29 Chapter 4 User level menus .................................................................................................................... 30 User menu ....................................................................................................................... 30 Time ..........................................................................................................................31 Set time ............................................................................................................... 31 Style .................................................................................................................... 31 Date ...........................................................................................................................32 Set date ............................................................................................................... 32 Style .................................................................................................................... 32 Site ID ........................................................................................................................33 Seal ...........................................................................................................................33 About menu ...................................................................................................................... 34 Bootloader ................................................................................................................. 34 Firmware and Application .......................................................................................... 35 ZQ375 Checkweigher Service Manual 3 Serial .........................................................................................................................35 Option ........................................................................................................................ 35 Enet ...........................................................................................................................36 IP ........................................................................................................................ 36 MAC .................................................................................................................... 37 Download .................................................................................................................. 37 Sserial ................................................................................................................. 37 Dserial ................................................................................................................ 37 Audit menu ...................................................................................................................... 38 Counter ..................................................................................................................... 38 Config ................................................................................................................. 38 Calibration .......................................................................................................... 39 Print ........................................................................................................................... 39 Port 1/Port 2/USB ............................................................................................... 39 Chapter 5 Diagnostics level menus ....................................................................................................... 40 Diag menu ....................................................................................................................... 40 Scale ......................................................................................................................... 41 Current Zero .............................................................................................................. 41 Display .....................................................................................................................