Solid State Sensors 103SR Series Analog Position Sensors MOUNTING DIMENSIONS (For reference only) 1SR15 Mounting Bracket FEATURES 1 Rugged, sealed threaded aluminum housing NEMA 3, 3R, 3S, 4, 12 and 13 requirements 1 22 gauge, 6 inch stranded leadwires, color coded and teflon insulated 1 Adjustable mounting NOTE: For digital sensors, see page 14. 103SR ORDER GUIDE Leadwire color code: Red Vs (+) Black Ground (–) Catalog Listing 103SR3F-5 Gray Linear Output Supply Voltage (VDC) 4 to 10 White R Adjust Supply Current (mA max.) 3.5 Output Voltage (V) 1.75 to 2.25V at 5V, 0 gauss TYPICAL LINEAR OUTPUT CHARACTERISTICS* Sensitivity (–400 to +400 Graph #1 The 103SR3F-5 features a single gauss) 0.75 to 1.06mV/gauss adjustable linear output. An external mT = Gauss ´ 10-1 bias resistor can be used to vary the zero gauss offset (null) and consequently, the output voltage. LEADWIRE TYPE Type 1 22 gage stranded, teflon insulated Type 2 22 gage PVC insulated conductor with black molded PVC jacket Type 3 22 gage insulated conductors with yellow thermoplastic Graph #2 polyurethane jacket These curves represent the typical Type 4 24 gage irradiated output characteristics at various supply voltages. polyethylene Graph #3 At 5 VDC supply voltage, these curves represent the typical performance of the 103SR3F-5 over temperature. * Illustrated characteristics are typical. Production lot sensor characteristics will be in the general range of those shown. PDFINFO p a g e - 0 2 4 24 Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1F1-815-235-6847 International 1 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Solid State Sensors 103SR Series Digital Position Sensors MOUNTING DIMENSIONS (For reference only) 1SR15 Mounting Bracket 1SR15HD Mounting Bracket FEATURES 1 Current sinking or current sourcing ouput 1 Rugged, sealed threaded aluminum housing NEMA 3, 3R, 3S, 4, 12 and 13 requirements** 1 20 gauge, 6 inch stranded leadwires, color coded, or 1 meter jacketed cable 1 Adjustable mounting Leadwire color code: NOTE: For analog sensors, see page Red Vs (+) 24. Black Ground (–) Blue, Green, Output or White 103SR ORDER GUIDE Catalog Listings* 103SR11A-1 103SR12A-1 103SR13A-1 103SR14A-1 103SR17A-1 103SR18-1 Supply Voltage (VDC) 4.5 to 5.5 6 to 24 4.5 to 24 4.5 to 24 4.5 to 24 4.5 to 24 Supply Current (mA max.) 4 10 10 10 10 10 Output Type Source Source Sink Sink Sink Sink Output Voltage (V max.) (Vs-1.5) (Vs-1.5) 0.4 0.4 0.4 0.4 Output Current (mA max.) 20 20 20 20 20 20 Magnetics Type Unipolar Unipolar Unipolar Unipolar Bipolar Latching Magnetic Char. & Temp. G mT G mT G mT G mT G mT G mT ° 0to70 C Max. Op. 735 73.5 495 49.5 475 47.5 — — 180 18.0 90 9.0 Min. Rel. 25 2.5 120 12.0 135 13.5 — — –180 –18.0 – 90 – 9.0 Min. Dif. 50 5.0 40 4.0 40 4.0 — — 40 4.0 40 4.0 –40to100°C Max. Op. — — — — 495 49.5 160 16.0 205 20.5 120 12.0 Min. Rel. — — — — 200 20.0 5 0.5 –205 –20.5 –120 –12.0 Min. Dif. — — — — 35 3.5 8 0.8 35 3.5 40 4.0 25°C Typ. Typ. Op. 350 35.0 350 35.0 400 40.0 90 9.0 50 5.0 50 5.0 Typ. Rel. 215 21.5 245 24.5 250 25.0 45 4.5 – 50 – 5.0 – 50 – 5.0 Typ. Dif. 135 13.5 85 8.5 85 8.5 45 4.5 100 10.0 80 8.0 * To order 1 meter jacketed leads, replace the 1 at the end of the catalog listing with a 2. Example 103SR13A-2. ** Stainless steel housing available for applications requiring compliance to NEMA 4X. Contact the 800 number. G = Gauss mT = milliTesla Magnets page 25. Unipolar: sensor has plus maximum operate point, plus minimum re- Bipolar sensor has plus (south pole) operate point and minus (north lease point. One magnetic pole (South) is required to operate and pole) minimum release point. Operate and release points can be both release a unipolar sensor. positive or both negative. Latching cannot be guaranteed. Ring mag- nets are usually used with bipolar sensors. LEADWIRE TYPE Type 1 22 gage stranded, teflon insulated Type 2 22 gage PVC insulated conductor with black molded PVC jacket Type 3 22 gage insulated conductors with yellow thermo- plastic polyurethane jacket Type 4 24 gage irradiated polyethylene PDFINFO p a g e - 0 1 4 14 Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1F1-815-235-6847 International 1 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Solid State Sensors 2AV Series Hall Effect Vane Position Sensor FEATURES GENERAL INFORMATION 1 Protection against random voltage 2AV Series Hall effect vane position sen- spikes sors are specifically designed to translate – electrical transients up to +80 volts the relative position of a ferrous metal – reverse power supply to –80 volts actuator into a digital electronic signal. 1 Stainless steel mounting studs lock The Hall effect integrated circuit and the sensor in place magnet are in a rugged plastic housing. 1 Vane depth of 17,2 mm (.68 in.) allows When a ferrous metal actuator passes flexibility in actuator placement between them, the magnetic flux is shunt- 1 Operating temperature range of –40 ed away from the sensor. This causes the ° to +150 C output signal to change state. 1 22 mA current consumption 1 4.5 to 24 VDC supply voltage range 1 Current sinking output 1 High output current capability up to 40 mA absolute maximum ORDER GUIDE Catalog Listing Description 2AV54 Current sinking Hall effect vane sensor MECHANICAL CHARACTERISTICS Operating Left or Right Differential Range Operate Release Diff. L to R, R to L 12 VDC, 25°C 1,19±,30 –1,04±,33 0,38±,33 2,21 ±,64 mm .047±.012 –.041±.013 .015±.013 .087 ±.025 in. ENVIRONMENTAL CHARACTERISTICS Vibration 45 G per MIL-STD-202, Method 204, condition E Humidity Up to 500 hours @ 85°C, 80% RH Salt spray 48 hours per IEC-68-2-11 Temperature shock 250 air-to-air shocks @ –40° to 130°C + MOUNTING DIMENSIONS (for reference only) PDFINFO p a g e - 0 5 0 50 Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1F1-815-235-6847 International 1 1-800-737-3360 Canada Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Solid State Sensors 2SSP Series Digital Position Sensors OPERATION MOUNTING DIMENSIONS 2SSP Series position sensors have mag- (For reference only) netoresistive material integrated on sil- icon and encapsulated in a plastic pack- age. The integrated circuit provides a dig- ital output in response to very low mag- netic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distanc- es. For example, the 2SSP sensing dis- PDFINFO p a g e - 0 0 7 tance is approximately one inch, when operated by a MICRO SWITCH 101MG3 magnet. Digital FEATURES 1 Low gauss operation can extend OPERATING MODE sensing distance to one inch or more, (Arrows indicate direction of magnetic depending on magnet size flux.) 1 Digital current sinking output 1 Omnipolar – can be operated with 2SSP sensors are operated by magnetic either North or South magnetic pole fields (North or South pole) parallel to the 1 Operating speed: 0 to over 100 kHz magnetoresistive element. 1 Small size: .18 x .18 inch 1 3-pin, in-line PC board terminals on NOTE: Due to the inherent high sensitivity .100-inch mounting centers of 2SSP sensors, stray magnetic fields 1 Operating temperature range: –20° to which are parallel to the IC may affect 85°C(–4°to 185°F) operation. 1 Surface mount style available – 2SSP-S 2SSP ORDER GUIDE Catalog Listing 2SSP/2SSP-S Supply Voltage (VDC) 6 to 24 Supply Current (mA max.) 13.5 Output Type Sink Output Voltage (V) @ 20mA .40 max. Output Current (mA max.) 20 Leakage Current (µA max.) 10 Magnetics Type Omnipolar Magnetic Char. & Temp. Gauss mT ° –20to85 C Max. Op. 25 2.5 Min. Rel. 5 0.5 Max. Dif. 7 0.7 25°C Typ. Typ. Op. 15 1.5 Typ. Rel. 11 1.1 Typ. Dif. 4 0.4 Magnets page 25. mT = milliTesla Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1F1-815-235-6847 International 1 1-800-737-3360 Canada 7 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com Solid State Sensors 4AV Series Hall Effect Vane Position Sensors FEATURES GENERAL INFORMATION 1 Operated by vane interrupter AV vane operated integral magnet posi- 1 –40to +125°C temperature range tion sensors are operated by passing a 1 Current sinking output ferrous vane through the gap between the 1 Smaller size than 2AV Hall sensor and the magnet, shunting the 1 Four pin in-line printed circuit board magnetic flux away from the sensor.