DELTA-12G1c-hmi10-elp Dual-channel 4K60 mixed HMDI™ capture and SDI I/O card The DELTA-12G1c-hmi10-elp mixed interface model is a dual-channel 4K60 card, capable of simultaneous capturing UHDTV (4K60) on HDMI™ and SDI. The SDI interfaces are bidirectional, meaning that each port can be configured by the software to act as an input or as an output. The card hosts four 3G/HD/SD-SDI ports, with one of them also supporting 6G and 12G-SDI. The HDMI 2.0b (600MHz TMDS) receiver along with the 12G or 4x 3G-SDI I/Os offer the best of both standards for 4K60 capture in both HDMI and SDI; and 4K60 playout in SDI, on a single compact, low-profile PCIe card. Designed for high-performance applications and HDR workflows, the DELTA-12G1c-hmi10-elp includes on-board color processing features (color space converters, chroma resampler and planar buffer packing), proxy scalers, embedded audio and HDR metadata support. Hardware UHDTV SDI interfaces Low-profile, half-length PCIe form factor Support of 1x UHDTV capture or playout (SMPTE formats) : PCIe Gen-3 x8 electrical interface Up to 4K60 in Single-Link 12G - ST 2082-10 1x HDMI 2.0b (600MHz TMDS clock) input Up to 4K60 in Quad-Link 3G HDMI Type A connector o 2 Sample Interleave (2SI) - ST 425-5 4x SDI bi-directional I/Os ports o Square Division (SQD) quad split - 4x 3G A or B- o Port 1 : 12G/6G/3G/HD/SD DL. o Port 2-4 : 3G/HD/SD Up to 4K30 in Single-Link 6G - ST 2081-10 HD-BNC 75Ohm high-frequency connectors Up to 4K30 in Dual-Link 3G – ST 425-3 2GB DDR-4 on-board buffer Reference input for Linear Timecode (LTC) or Blackburst /Tri-Level genlock Other SDI interfaces LTC capture card companion option 4-ch independent SDI I/Os ports in SMPTE Fully passive version or active (fan) option 3G SDI (ST 424) Level A and Level B-DL (ST 425-1) HD-SDI (ST 292) HDMI 2.0 features* Dual-Link HD-SDI (ST 372) SD-SDI (ST 259) All formats defined in HDMI 2.0b up to 4K60 Support of RGB / YUV 4:4:4, 4:2:2, 4:2:0 and ICtCp 4:2:2 Extended color depth formats in 8/10/12/16- bits and SDI features High Dynamic Range (HDR) video Full access to SDI ancillary data (ANC) and VBI Colorimetry REC.601/709, BT.2020, DCI-P3 Support for embedded audio, up to 32-ch per SDI link 8-channel audio support per HDMI port Support for embedded timecode, captions, etc HDMI metadata (Infoframe) capture HDR format signaling and metadata transport in ANC Frame Rate decimation on HDMI input Line CRC/EDH check, advanced SDI bad signal error No HDCP support in default version. HDCP v1.4 or v2.2 diagnostic version possible for HDCP adopters only Advanced SDI clocking options: free-run; software adjustable rate, or locked on a reference input (blackburst, Tri-Level, SDI or HDMI input) Video formats Video formats: PAL, NTSC, 720p, 1080i, 1080p, 2160p (4K-DCI or UHDTV) Features Graphic formats: VGA, SVGA, XVGA, WXGA, WXGA+, Proxy Scalers for low-res input monitoring UXGA, WUXGA, WSXGA or custom resolution Color Space converters and Chroma Resampler Planar buffer packing support Low Latency DMA engine, User application buffers Delivered with VideoMaster SDK (Linux, Windows and macOS) and Directshow filters *HDMI 2.0b not supported feature list: No support of CEC, HEAC, Lip Sync, 3D “Dual-View” signaling, 3D audio, and multi-stream audio. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. www.deltacast.tv - [email protected] .