A Tailored Suit Printable Tape Measure You Need • A Printer • Scissors • Clear Tape • A Crisp New US Dollar Bill (Any denomination) Assembly Instructions 1. Print the tape measure (see instructions below) 2. Ensure the printed tape measure is accurate by using it to measure a dollar note; a dollar (any denomination) is 6.125 inches in length (give or take 1/16 an inch). If you are off by .125 (1/8) inch or more, ensure you are printing true to size by checking your printing preferences (see below). If you continue to be off by .125 or more, contact us and we’ll ship you a free tape measure immediately. 3. Carefully cut out all 8 pieces of the tape measure. 4. Connect each strip in order as indicated using tape – tape both sides and ensure the overlap is behind the measurement side. Glue can be used in a pinch, but is not recommended. 5. Smaller men do not need to attach the last piece (64 to 72 inches). 6. If you have a ruler or yard stick, use it to check for accuracy. Otherwise, you want to spot check between taped pieces with a dollar note to ensure final accuracy. The measurement tape is ready for use. Adobe Acrobat Printing Instructions The goal here is to print this tape measure true to size. Depending on your version of Acrobat Reader, "Fit to page" or "Shrink oversized pages to paper size" should NOT be checked. If you have: Acrobat Reader 6, 7,or 8 select "none” in the drop down next to "Page Scaling" option. Acrobat reader 5, make sure that the “Fit To Page" option is not selected. Acrobat Reader 4, make sure to UNCHECK the following dialogue boxes: - Shrink oversized pages to paper size - Expand small pages to paper size - Auto-rotate and center 1 2 3 4 5 6 $1 Length 7 8 9 Attach to 9 inches 10 11 12 13 14 15 16 17 18 Attach to 18 inches 19 20 21 22 23 24 25 26 27 Attach to 27 inches 28 29 30 31 32 33 34 35 36 Attach to 36 inches 37 38 39 40 41 42 43 44 45 Attach to 45 inches 46 47 48 49 50 51 52 53 54 Attach to 54 inches 55 56 57 58 59 60 61 62 63 Attach to 63 inches 64 65 66 67 68 69 70 71 72.