Swivel Drawbar Eyes 405 Swivel Slack Reducing Eye 405L & 405S with 416 Locknut & 208 Snap Ring: 6 15/16 See pages for Front End Assemblies� A 3 B Parts Included: - 375 Bolt - 375A Locknut 2 3/8 5 3/4 2 - 400 Shoe A A - 208 Snap Ring (405L & 405S) - 416 Locknut (405L & 405S) 405 - 422 Sleeve Nut (405SE) - 525 Jam Nut - Pushrod (see below) 1 11/16 4 1/4 SPECIFICATIONS 1 3/4 Maximum Gross Trailer Weight: 90,000 lbs� (40,823 kg) Maximum Tongue Weight: 3,700 lbs� (1,678 kg) 405SE with 422 Sleeve Nut: Inside Diameter: See drawing 6 15/16 1 11/16 MIN 2 15/16 MIN Unit Weight: See chart 2 1/4 MAX 3 1/2 MAX A 3 B Model A B Weight 405L 9 1/4 in� (235 mm) 3 1/8 in� (79 mm) 27�8 lbs� (12�6 kg) 2 3/8 5 3/4 2 405S 8 1/8 in� (206 mm) 2 1/2 in� (64 mm) 26�9 lbs� (12�2 kg) A A 405SE 10 1/8 in� (257 mm) 2 1/4 in� (57 mm) 28�5 lbs� (12�9 kg) 3/4-16UNF-2A 2-12UNF-2A 405 (2 1/2 LONG) 405 Swivel Drawbar Eye: 405 Pushrod Options Standard Pushrod Lengths: - 405L: 415A Pushrod - 17 1/4 in� (438 mm), right-hand thread Optional Left-Hand Threaded Pushrods: - 405S: 415 Pushrod - 15 1/2 in� (394 mm), right-hand thread - 415L: 15 1/2 in� (394 mm), left-hand thread - 405SE: 415A Pushrod - 17 1/4 in� (438 mm), right-hand thread - 415AL: 17 1/4 in� (438 mm), left-hand thread 410L & 410S with 416 Locknut & 208 Snap Ring: 410 Swivel Slack Reducing Eye 1 13/16 A 3 See pages for Front End Assemblies� 2 Parts Included: A A - 411 Shoe 2-12UNF-2A 3/4-16UNF-2A - 208 Snap Ring (410L & 410S) (2 1/2 LONG) - 416 Locknut (410L & 410S) 2 13/16 - 422 Sleeve Nut (410SE) - Pushrod (see below) 1 11/16 4 1/4 SPECIFICATIONS 1 3/4 Maximum Gross Trailer Weight: 90,000 lbs� (40,823 kg) Maximum Tongue Weight: 3,700 lbs� (1,678 kg) 410SE with 422 Sleeve Nut: Inside Diameter: See drawing Unit Weight: See chart A Model A B Weight 410L 9 1/4 in� (235 mm) 17 3/4 in� (451 mm) 25�8 lbs� (11�7 kg) A A 410S 8 1/8 in� (206 mm) 16 in� (406 mm) 24�6 lbs� (11�2 kg) 410SE 10 1/8 in� (257 mm) 17 3/4 in� (451 mm) 26�6 lbs� (12�1 kg) 410 Swivel Drawbar Eye: 410 Pushrod Options Standard Pushrod Lengths: - 410L: 413A Pushrod - 17 3/4 in� (451 mm), right-hand thread Optional Left-Hand Threaded Pushrods: - 410S: 413 Pushrod - 16 in� (406 mm), right-hand thread - 413AL: 17 3/4 in� (451 mm), left-hand thread - 410SE: 413A Pushrod - 17 3/4 in� (451 mm), right-hand thread - 413L: 16 in� (406 mm), left-hand thread IMPORTANT GUIDELINES that apply to all Premier Swivel Drawbar Eyes - Never attempt weld repair of damaged or worn drawbar eyes - Clean and inspect drawbar eyes and eye assemblies for damage or excessive wear - Never attempt to use a swivel-type drawbar eye with a swivel-type coupling before each and every use - Slack reducing drawbar eyes must be used with an air service chamber or #500 - Assembly to which eye is attached must be of sufficient strength to withstand load slack adjuster rating of eye - Do not apply lubricants to the drawbar eye loop - Do not bind-up (Jackknife) any application as stresses can cause damage to products or components, resulting in failure and detachment of the trailer while in use PREMIER MANUFACTURING COMPANY 1-800-255-5387 • www.premier-mfg.com 61.