Zur Kritik vorgelegte Entwürfe Im Hinblick auf die spätere Übernahme in das Normenwerk von Electrosuisse werden folgende Entwürfe zur Stellungnahme ausgeschrieben. Alle an der Materie Interessierten sind hiermit eingeladen, diese Entwürfe zu prüfen und eventuelle Stellungnahmen dazu Electrosuisse schriftlich einzureichen. Die ausgeschriebenen Entwürfe (im Normenshop nicht aufgeführt) können gegen Kostenbeteiligung beim Normenverkauf, Electrosuisse, Luppmenstrasse 1, 8320 Fehraltorf, Tel. 044 956 11 65, Fax 044 956 14 01, [email protected], bezogen werden. Projets de normes mis à l'enquête En vue d’une reprise ultérieure dans le recueil des normes d’Electrosuisse, les projets suivants sont mis à l’enquête pour prise de position. Tous les intéressés en la matière sont invités à étudier ces projets et à adresser, par écrit, leurs observations éventuelles à Electrosuisse. Les projets mis à l’enquête (non mentionnés au shop en ligne) peuvent être obtenus, moyennant une participation aux frais, auprès d’Electrosuisse, Vente des normes, Luppmenstrasse 1, 8320 Fehraltorf, tél. 044 956 11 65, fax 044 956 14 01, [email protected]. TK 29 Einsprachetermin/ délai d'envoi des observations: 2020-02-13 29/1038/CDV - Draft IEC//EN IEC 60263 Scales and sizes for plotting frequency characteristics and polar diagrams TK 34 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 34A/2160/CDV - Draft IEC//EN IEC 61228 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method TK 40 Einsprachetermin/ délai d'envoi des observations: 2020-01-30 40/2704/CDV - Draft IEC//EN IEC 60384-13 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors TK 47 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 47/2595/CDV - Draft IEC//EN IEC 62435-8 Electronic components - Long-term storage of electronic semiconductor devices - Part 8: Passive electronic devices TK 47 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 47E/693/DTS - Draft IEC/TS 60747-19-2 Semiconductor devices - Part 19-2: Smart sensors - Indication of specifications of smart sensors and power supplies to drive smart sensors TK 48 Einsprachetermin/ délai d'envoi des observations: 2020-01-30 48B/2763/CDV - Draft IEC//EN IEC 61076-2-012 Connectors for electrical and electronic equipment Product Requirements Part 2-012: Circular connectors Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113 TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 61/5930/CDV - Draft IEC 60335-2-4 Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 61/5931/CDV - Draft IEC 60335-2-30/A2 Amendment 2 - Household and similar electrical appliances - Safety -Part 2-30: Particular requirements for room heaters 1 / 16 TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 61/5932/CDV - Draft IEC 60335-2-35/A2 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 61/5933/CDV - Draft IEC 60335-2-53/A2 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 61/5934/CDV - Draft IEC 60335-2-81/A2 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 61/5935/CDV - Draft IEC 60335-2-82/A1 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-02-05 EN 60335-2-52:2003/prA2 Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for appliances for oral hygiene appliances TK 61 Einsprachetermin/ délai d'envoi des observations: 2020-02-13 EN 60335-2-8:2015/prAA Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances TK 62 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 62A/1370/CDV - Draft ISO 81001-1 Health software and health IT systems safety, effectiveness and security - Foundational principles, concepts and terms TK 64 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 prHD 60364-7-710:2019/prAA Low voltage electrical installations - Part 7-710: Requirements for special installations or locations - Medical locations TK 65 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 65/774/CDV - Draft IEC//EN IEC 62832-2 Industrial-process measurement, control and automation - Digital Factory framework - Part 2: Model elements TK 65 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 65/775/CDV - Draft IEC//EN IEC 62832-3 Industrial-process measurement, control and automation - Digital Factory framework Part 3: Application of Digital Factory for life cycle management of production systems TK 65 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 65/776/CDV - Draft IEC//EN 62832-1 Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles TK 77A Einsprachetermin/ délai d'envoi des observations: 2020-02-06 77A/1058/CDV - Draft IEC//EN IEC 61000-3-2/A1 Amendment 1/Fragment 2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current =16 A per phase) TK 86 Einsprachetermin/ délai d'envoi des observations: 2020-01-30 86B/4244/CDV - Draft IEC//EN IEC 61300-3-53 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -Part 3-53: Examinations and Measurements ? Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) 2 / 16 TK 100 Einsprachetermin/ délai d'envoi des observations: 2020-01-30 100/3316/CDV - Draft IEC//EN 60268-7 IEC 60268-7/AMD1 ED3: Sound system equipment - Part 7: Headphones and earphones TK 106 Einsprachetermin/ délai d'envoi des observations: 2020-02-13 prEN 50527-2-3 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices - Part 2-3: Specific assessment for workers with implantable neurostimulators TK 116 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 116/427/CDV - Draft IEC//EN 62841-3-1/A1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws TK 116 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 EN 62841-3-1:2014/prA1:2019/prAA Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws TK 215 Einsprachetermin/ délai d'envoi des observations: 2020-02-13 EN 50174-1:2018/prA1 Information technology - Cabling installation - Part 1: Installation specification and quality assurance TK IoT Einsprachetermin/ délai d'envoi des observations: 2020-02-06 JTC 1/SC 41/117/CDV ISO/IEC 30144 ED1: Internet of Things (IoT) ? Wireless sensor network system supporting electrical power substation CENELEC/BTTF 157-1 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 prEN 50695:2019 Public-address-general-emergency-alarm-system, communication-system for marine applications CEN/CLC/JTC 13 Einsprachetermin/ délai d'envoi des observations: 2020-01-15 prEN ISO/IEC 27019 Information technology - Security techniques - Information security controls for the energy utility industry (ISO/IEC 27019:2017, Corrected version 2019-08) IEC/TC 51 Einsprachetermin/ délai d'envoi des observations: 2020-01-30 51/1313/CDV - Draft IEC//EN IEC 60401-1 Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions IEC/TC 68 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 68/641/CDV - Draft IEC 60404-8-7 Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state IEC/TC 89 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 89/1491/CDV - Draft IEC//EN IEC 60695-2-13 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials IEC/TC 89 Einsprachetermin/ délai d'envoi des observations: 2020-02-06 89/1492/CDV - Draft IEC//EN IEC 60695-2-11 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) 3 / 16 Ankündigung von Europäischen Normen Das europäische Komitee für elektrotechnische Normung CENELEC hat die nachstehend aufgeführten Europäischen Normen (EN) und Harmonisierungsdokumente (HD) angenommen. Die Übernahme/Anerkennung in das schweizerische Normenwerk (SN) ist in Vorbereitung. Annonce de normes européennes Le Comité européen de normalisation CENELEC