PCA-6009 Full-sized PC PCA-6009 Full-sized PCA/ISA-bus LGA775 with VGA/Gigabit Card Pentium® 4/Celeron® D Processor Card with VGA/Gigabit LAN/HISA (800 MHz FSB) Packing List Specifications Before you begin installing your card, please make Standard SBC Functions sure that the following materials have been shipped: • CPU: Intel LGA 775 Celeron D up to 3.06 GHz, Pentium 4 up to 3.4 GHz, FSB 533/800 MHz. • 1 PCA-6009 Pentium® 4/Celeron® D processor- • BIOS: Award 4 Mb Flash memory BIOS based single board computer • Chipset: Intel 915GV with ICH6 • 1 PCA-6009 Startup Manual • System Memory: Up to 2 GB; two 240-pin DIMM sock- ets. Supports dual channel DDRII 400/533 SDRAM. • 1 CD with driver utility and manual (in PDF format) • SATA/IDE Interface: Two on-board serial ATA connec- • 1 FDD cable p/n: 1700340640 tors with data transmission rate up to 150 MB/Sec and supporting Advanced Host controller interface (AHCI) • 1 Ultra ATA 66/100 HDD cables p/n: 1701400452 technology. One IDE hard disk drives or two enhanced LAN/HISA (800 MHz FSB) I/ISA-bus LGA775 Pentium • 2 Serial ATA HDD data cables p/n: 1700071000 IDE devices. Supports PIO mode 4 (16.67MB/s data transfer rate) and ATA 33/66/100 (33/66/100MB/s data • 2 Serial ATA HDD power cables p/n: 1703150102 transfer rate.) BIOS enabled/disabled. • 1 ATX 12V power converter p/n: 170304015K • FDD interface: Supports one FDD cable • Serial ports: Two serial RS-232 ports • 1 Printer (parallel) port & COM p/n: 1701260305 • Parallel port: One parallel port, supports SPP/EPP/ port cable kit ECP mode • Keyboard/mouse connector: Supports one standard • 1 Y cable for PS/2 keyboard and p/n: 1700060202 PS/2 keyboard and mouse PS/2 mouse • Watchdog timer: 255 level timer intervals • 1 USB cable with 4 ports p/n:1700000719 • USB (2.0): Supports up to four USB 2.0 ports with the • Warranty Card one USB 2.0 cable kits included VGA/LCD Interface Warning: Advantech highy recommends attaching only the dedicated LGA775 CPU coolers, Advantech • Chipset: Chipset integrated VGA controller part numbers ,1750000332 or 1750000334 both of • Display memory: Dynamically shared system memory which have a high MTBF and reliability. Using non- up to 128 MB. recommended CPU coolers, like Intel boxed CPU • Resolution: Up to 2048x1536@ 85 MHz refresh coolers, may result in PCB warping and CPU card overheating. Ethernet Interface If any of these items are missing or damaged, contact • Controller: Broadcom BCM5721 your distributor or sales representative immediately. • Single 10/100/1000Base-T:Broadcom BCM5721 CA-6184-B1 Socket 478 Pentiu Note: PCA-6009VG uses on-board LAN2 controller Note: Acrobat Reader is required to view any PDF file. ® Acrobat Reader can be downloaded at: Mechanical and Environmental 4/Celeron www.adobe.com/Prodindex/acrobat/readstep.html • Dimensions (L x W): 338 x 122 mm (Acrobat is a trademark of Adobe) • Power supply voltage: +5 V ± 12 V • Power requirements: Maximum: +5V:6.64A, +12V:12.59A (Intel Pentium4 3.4GHz with 800MHz For more information on this and other Advantech FSB, 2 X256 MB, 2 X 512 MB DDRII 533 SDRAM) products, please visit our website at: • Operating temperature: 0 ~ 60° C (depending on CPU) http://www.advantech.com • Weight: 0.5 kg (weight of board) http://www.advantech.com/eplatform ® D Processor For technical support and service, please visit our support website at: http://www.advantech.com/support This manual is for the PCA-6009 series Rev. A1 Part No. 2002600910 1st Edition Printed in Taiwan June 2006 PCA-6009 Startup Manual 1 m Jumpers and Connectors J1: CMOS clear function Pins Result The board has a number of jumpers that allow you to 1-2 (closed) Keep CMOS data* configure your system to suit your application.The 2-3 (short) Clear CMOS table below lists the function of each of the jumpers and connectors. Label Function J1: CMOS clear function J2: Watchdog timer output option CN1 Primary IDE connector CN3 FDD connector, Supports 360K/1.2M/720K/ 1.44M FDD x 2 CN4 Parallel port, Parallel port x 1, supports SPP/ EPP/ECP mode CN6 USB port 1,2 CN7 VGA connector CN8 Ethernet connector 1 *default setting CN9 Serial port: COM1; RS232 (D-sub 9-pin con- nector) CN10 Serial port: COM2; RS232 (9-pin connector) CN11 PS/2 keyboard and mouse connector J2: Watchdog timer output option Cable length: 20 meters Closed pins Result CN12 External keyboard connector (6-pin) 1-2 IRQ11 CN13 Infrared connector 2-3 System reset * CN16 Power LED CN17 External speaker CN18 Reset connector CN19 HDD LED connector CN20 ATX feature connector CN21 ATX soft power switch (PS_ON) IRQ11 CN22 HW Monitor Alarm 1 - 2 closed Close: Enable OBS Alarm Open: Disable OBS Alarm CN43 AC97 Audio connector CN63 USB ports 3,4 CN64 Case Open CN65 Front Panel LAN indicator connector System Reset CN68 CPU FAN connector (4-pin) 2 - 3 closed SA0 Serial ATA0 SA2 Serial ATA2 ATX1 ATX 12V Auxiliary power connector *default setting (for CPU) Software Installation The CD disc contains a driver installer program that will lead you through the installation of various device drivers needed to take full advantage of your CPU card. Caution The computer is supplied with a battery-powered Real-time Clock circuit. There is a danger of explo- sion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to manufacturer's instructions. 2 PCA-61009 Startup Manual 3 CN21CN18 SA0CN3 SA2 CN68 CN1 PCA-6009 Startup Manual CN19 CN17 DDRII 4 CN10 CN16 ATX1 DDRII 2 CN65 1. This device may not cause harmful interference, harmful cause not interference, may This 1. device and received, interference any accept must device This 2. oper- undesired cause may that interference including ation CN6 CN63 CN9 B CN4 CN20 J2 CN13 J1 CN7 CN22 CN43 CN11 CN12 Board Layout: Jumper and Connector Locations Safety Information Safety This device complies with the requirements in Part 15 in Part requirements the with complies This device following to the is subject FCC Operation the rules. of conditions: two.