General Commands Reference Guide C TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents ...................................................................................................................... General Commands ...................................................................................................................... General Commands Reference Guide C .................................................................................. 1 History ...................................................................................................................................... 11 CACHE ...................................................................................................................................... 12 CACHE View and modify CPU cache contents 12 CACHE.CLEAN Clean CACHE 12 CACHE.ComPare Compare CACHE with memory 13 CACHE.DUMP Dump CACHE 14 CACHE.FLUSH Clean and invalidate CACHE 15 CACHE.GET Get CACHE contents 16 CACHE.INFO View all information related to an address 16 CACHE.INVALIDATE Invalidate CACHE 17 CACHE.List List CACHE contents 17 CACHE.ListFunc List cached functions 18 CACHE.ListLine List cached source code lines 19 CACHE.ListModule List cached modules 19 CACHE.ListVar List cached variables 20 CACHE.LOAD Load previously stored cache contents 21 CACHE.RELOAD Reload previously loaded cache contents 21 CACHE.SAVE Save cache contents for postprocessing 21 CACHE.SNAPSHOT Take cache snapshot for comparison 22 CACHE.UNLOAD Unload previously loaded cache contents 23 CACHE.view Display cache control register 24 CAnalyzer ................................................................................................................................. 25 CAnalyzer Trace features of Compact Analyzer 25 CAnalyzer - Compact Analyzer specific Trace Commands ................................................. 27 CAnalyzer.<specific_cmds> Overview of CAnalyzer-specific commands 27 CAnalyzer.CLOCKDelay Set clock delay 27 CAnalyzer.CLOSE Close named pipes 27 CAnalyzer.DecodeMode Define how to decode the received trace data 28 CAnalyzer.I2C I2C control 29 CAnalyzer.Mode Set the trace operation mode 30 CAnalyzer.PipeLOAD Load a previously saved file 31 ©1989-2021 Lauterbach GmbH General Commands Reference Guide C 1 CAnalyzer.PipeRePlay Replay a previously recorded stream 31 CAnalyzer.PipeSAVE Define a file that stores received data 32 CAnalyzer.PipeWRITE Define a named pipe as trace sink 32 CAnalyzer.SAMPLE Set sample time offset 33 CAnalyzer.ShowFocus Display data eye 34 CAnalyzer.ShowFocusClockEye Show clock eye 37 CAnalyzer.ShowFocusEye Show data eyes 38 CAnalyzer.TERMination Configure parallel trace termination 40 CAnalyzer.TOut Route trigger to PODBUS (CombiProbe/µTrace) 40 CAnalyzer.TraceCLOCK Configure the trace port frequency 41 CAnalyzer.TracePORT Select which trace port is used 42 CAnalyzer.WRITE Define a file as trace sink 43 Generic CAnalyzer Trace Commands ................................................................................... 44 CAnalyzer.ACCESS Define access path to program code for trace decoding 44 CAnalyzer.Arm Arm the trace 44 CAnalyzer.AutoArm Arm automatically 44 CAnalyzer.AutoFocus Calibrate AUTOFOCUS preprocessor 44 CAnalyzer.AutoInit Automatic initialization 44 CAnalyzer.BookMark Set a bookmark in trace listing 44 CAnalyzer.BookMarkToggle Toggles a single trace bookmark 45 CAnalyzer.Chart Display trace contents graphically 45 CAnalyzer.CLOCK Clock to calculate time out of cycle count information 45 CAnalyzer.ComPare Compare trace contents 45 CAnalyzer.ComPareCODE Compare trace with memory 45 CAnalyzer.CustomTrace Custom trace 45 CAnalyzer.CustomTraceLoad Load a DLL for trace analysis/Unload all DLLs 45 CAnalyzer.DISable Disable the trace 46 CAnalyzer.DRAW Plot trace data against time 46 CAnalyzer.EXPORT Export trace data for processing in other applications 46 CAnalyzer.ExtractCODE Extract code from trace 46 CAnalyzer.FILE Load a file into the file trace buffer 46 CAnalyzer.Find Find specified entry in trace 46 CAnalyzer.FindAll Find all specified entries in trace 46 CAnalyzer.FindChange Search for changes in trace flow 46 CAnalyzer.FindProgram Advanced trace search 47 CAnalyzer.FindReProgram Activate advanced existing trace search program 47 CAnalyzer.FindViewProgram State of advanced trace search programming 47 CAnalyzer.FLOWPROCESS Process flowtrace 47 CAnalyzer.FLOWSTART Restart flowtrace processing 47 CAnalyzer.Get Display input level 47 CAnalyzer.GOTO Move cursor to specified trace record 47 CAnalyzer.Init Initialize trace 48 CAnalyzer.List List trace contents 48 ©1989-2021 Lauterbach GmbH General Commands Reference Guide C 2 CAnalyzer.ListNesting Analyze function nesting 48 CAnalyzer.ListVar List variable recorded to trace 48 CAnalyzer.LOAD Load trace file for offline processing 48 CAnalyzer.OFF Switch off 48 CAnalyzer.PortFilter Specify utilization of trace memory 48 CAnalyzer.PortType Specify trace interface 48 CAnalyzer.PROfileChart Profile charts 49 CAnalyzer.PROfileSTATistic Statistical analysis in a table versus time 49 CAnalyzer.PROTOcol Protocol analysis 49 CAnalyzer.PROTOcol.Chart Graphic display for user-defined protocol 49 CAnalyzer.PROTOcol.Draw Graphic display for user-defined protocol 49 CAnalyzer.PROTOcol.EXPORT Export trace buffer for user-defined protocol 49 CAnalyzer.PROTOcol.Find Find in trace buffer for user-defined protocol 49 CAnalyzer.PROTOcol.List Display trace buffer for user-defined protocol 50 CAnalyzer.PROTOcol.PROfileChart Profile chart for user-defined protocol 50 CAnalyzer.PROTOcol.PROfileSTATistic Profile chart for user-defined protocol 50 CAnalyzer.PROTOcol.STATistic Display statistics for user-defined protocol 50 CAnalyzer.REF Set reference point for time measurement 50 CAnalyzer.RESet Reset command 50 CAnalyzer.SAVE Save trace for postprocessing in TRACE32 50 CAnalyzer.SelfArm Automatic restart of trace recording 51 CAnalyzer.SIZE Define buffer size 51 CAnalyzer.SnapShot Restart trace capturing once 51 CAnalyzer.SPY Adaptive stream and analysis 51 CAnalyzer.state Display trace configuration window 51 CAnalyzer.STATistic Statistic analysis 51 CAnalyzer.STREAMCompression Select compression mode for streaming 51 CAnalyzer.STREAMFILE Specify temporary streaming file path 52 CAnalyzer.STREAMFileLimit Set size limit for streaming file 52 CAnalyzer.STREAMLOAD Load streaming file from disk 52 CAnalyzer.STREAMSAVE Save streaming file to disk 52 CAnalyzer.TDelay Trigger delay 52 CAnalyzer.TestFocus Test trace port recording 52 CAnalyzer.TestFocusClockEye Scan clock eye 52 CAnalyzer.TestFocusEye Check signal integrity 53 CAnalyzer.TestUtilization Tests trace port utilization 53 CAnalyzer.THreshold Optimize threshold for trace lines 53 CAnalyzer.Timing Waveform of trace buffer 53 CAnalyzer.TraceCONNECT Select on-chip peripheral sink 53 CAnalyzer.TRACK Set tracking record 53 CAnalyzer.TSELect Select trigger source 53 CAnalyzer.View Display single record 54 CAnalyzer.ZERO Align timestamps of trace and timing analyzers 54 ©1989-2021 Lauterbach GmbH General Commands Reference Guide C 3 CIProbe ..................................................................................................................................... 55 CIProbe Trace with Analog Probe and CombiProbe/?Trace (MicroTrace) 55 CIProbe-specific Trace Commands ....................................................................................... 56 CIProbe.<specific_cmds> Overview of CIProbe-specific commands 56 CIProbe.ALOWerLIMit Set lower trigger/filter comparator value 56 CIProbe.ATrigEN Enable/disable trigger contribution of a channel 56 CIProbe.ATrigMODE Set trigger/filter condition 58 CIProbe.AUPPerLIMit Set upper trigger/filter comparator value 59 CIProbe.Mode Set trace operation mode 59 CIProbe.state Display CIProbe configuration window 60 CIProbe.TDelay Define trigger delay 60 CIProbe.TOut Route CIProbe trigger to PODBUS 61 CIProbe.TSELect Route PODBUS trigger to CIProbe 62 Generic CIProbe Trace Commands .......................................................................................63 CIProbe.Arm Arm the trace 63 CIProbe.AutoArm Arm automatically 63 CIProbe.AutoInit Automatic initialization 63 CIProbe.BookMark Set a bookmark in trace listing 63 CIProbe.BookMarkToggle Toggles a single trace bookmark 63 CIProbe.DISable Disable the trace 63 CIProbe.DRAW Plot trace data against time 64 CIProbe.EXPORT Export trace data for processing in other applications 64 CIProbe.FILE Load a file into the file trace buffer 64 CIProbe.Find Find specified entry in trace 64 CIProbe.FindAll Find all specified entries in trace 64 CIProbe.FindChange Search for changes in trace flow 64 CIProbe.GOTO Move cursor to specified trace record 64 CIProbe.Init Initialize trace 64 CIProbe.List List trace contents 65 CIProbe.LOAD Load trace file for offline processing 65 CIProbe.OFF Switch off 65 CIProbe.REF Set reference point for time measurement 65 CIProbe.RESet Reset command 65 CIProbe.SAVE Save trace for postprocessing in TRACE32 65 CIProbe.SIZE Define buffer size 65 CIProbe.STREAMCompression Select compression mode for streaming 65 CIProbe.STREAMFILE Specify temporary streaming file path 66 CIProbe.TRACK Set tracking record 66 CIProbe.ZERO Align timestamps of trace and timing analyzers 66 ClipStore .................................................................................................................................. 67 ClipSTOre Store settings to clipboard 67 CLOCK .....................................................................................................................................