FEZ Cerbuino Bee - GHI Electronics FEZ Cerbuino Bee 2 Description FEZ Cerbuino is for developers wanting a low-cost Arduino-comaptible Gadgeteer-compatible mainboard. This 100% open-source (OSHW) offer includes an on-board power connector, voltage regulators, MicroSD connector, USB host and USB Client connectors. Ready to plug-and-play using the included USB cable. The power of .NET Gadgeteer platform sockets is found on FEZ Cerbuino. These 3 gadgeteer-compatible sockets allow developers to seamlessly connect almost any of the Gadgeteer modules. The Xbee socket automatically brings all sorts of wireless options to the table, including WiFi and Zigbee. Key Features: 3 .NET Gadgeteer compatible sockets that include these types: Y, A, I, K, O, P, S, U. Arduino Compatible headers (some signals are shared with Gadgeteer sockets) Xbee Adapter for ZigBee or WiFi XBee modules. Configurable on-board LED. Software/Hardware features includes but not limited to: .NET Micro Framework 4.2 (supporting C# and Visual Basic) with FEZ Cerberus firmware 168Mhz 32bit processor with floating point 1MB FLASH, over 300K for user's code FEZ Cerbuino Bee - GHI Electronics 192KB RAM, 112KB for user's heap Full TCP/IP Stack with HTTP, TCP, UDP, DHCP Ethernet support with Ethernet ENC28 module. USB host USB Device SPI I2C 2 UART CAN 9 Analog Inputs. 2 Analog Output 4-bit microSD interface 6 PWM OneWire interface Built-in Real Time Clock (Needs 32Khz crystal) RLPLite allowing users to load native code (C/Assembly) for real-time requirements. FAT File System Dimensions: W 8cm x L 5.5cm Power Through USB port or an external DC 6-9V power supply (connecting both is safe). 3.3V regulated DC output is available. 5.0V regulated DC output is available Digital I/O are 3.3V but 5V tolerant (Reset pin is not 5V tolarent) Active power consumption TBA Idle power consumption TBA Environmental: Operating temperature: -20 to 65°C RoHS compliant /Lead-free compliant Note: Mini USB cable is included at no additional cost. For more information about .NET Gadgeteer visit: http://www.netmf.com/gadgeteer/ Ethernet support is available through Ethernet ENC28 Module. WiFi support is available through Xbee Adapter. © 2003-2012 GHI Electronics LLC.