NAME + IMAGE DESCRIPTION DIN MATERIAL THREAD FINISH DOWEL PINS Hardened Steel straight 6325 BLACK / E/G pin SELLOC PINS Slotted spring type straight 1481 BLACK / E/G pin SPLIT PINS Split pin is a metal fastener SPLIT E/G with two legs that are bent apart during installation used to fasten metal together. STRAINING EYE BOLTS This robust and practical 580SB E/G wire straining bolt with an unwelded eye is suitable for tensioning wires PIGTAIL BOLTS Pigtail eyebolts are PIG E/G threaded at one end and the other end is hot worked to form a pigtail eyebolt. TESTED EYE BOLTS Eye bolts and eye nuts are 580T E/G used for lifting machines, appliances or any other objects which cannot be lifted by hand or by fork lift truck. TESTED EYE NUTS Eye nuts are used for lifting 580N E/G machines, appliances or any other objects which cannot be lifted by hand or by fork lift truck. NAME + IMAGE DESCRIPTION DIN MATERIAL THREAD FINISH EXTERNAL CIRCLIPS An External Circlip is a 6796E BLACK fastener that holds components or assemblies onto a shaft when installed in a groove INTERNAL CIRCLIPS An Internal Circlip is a 6796I BLACK fastener that holds components or assemblies in a housing or bore when installed in a groove NAILIN ANCHORS Is a Nail Drive Anchor with NAILIN as plastic / nylon plug used for securing medium to light weight fixings in concrete, concrete blocks, full and half brick surfaces SLEEVE ANCHORS Sleeve anchors are SLE E/Y pre-assembled expanding sleeve anchors for use in all types of solid base materials. WEDGE ANCHORS Wedge style expansion WA E/G / E/Y anchor with a collar/collars for use in solid concrete or grout-filled concrete masonry. EXPANSION BOLTS A bolt having an attached EXPAN E/Y shield that expands as the bolt is turned after being driven into concrete, concrete blocks. RAWL EXPANSION BOLTS A bolt having an attached RAWL E/Y shield that expands as the bolt is turned after being d riven into concrete,concrete blocks. Rawl Make. NAME + IMAGE DESCRIPTION DIN MATERIAL THREAD FINISH CHEMICAL CAPSULES An epoxy resin, suitable for CHEM 10MM - 30MM differant size stud installation, high load capacity, ideal for application where expansion anchors presents problems. RUNNIG STUDS Running Studs are studs of RUN BLACK / E/G different lenghts that are threaded from one end to the other. ENGINEERING STUDS Are Studs with threads on 938 BLACK / E/G both ends and a blank shank in the centre. EXHAUST MANIFOLD Are High Tensile Studs with SPARE 8.8 E/Y STUDS threads on both ends and a blank shank in the centre. Used on Manifolds MILD STEEL THREADED Threaded rod is a fastening 975 4.6 METRIC BLACK / E/G RODS baror a rod threaded along its length.Comes in 1mt and 3mt Lenghts Metric H.T THREADED RODS Threaded rod is a fastening 975 8.8 METRIC BLACK / E/G bar or a rod threaded along its length.Comes in 1mt Lenghts Metric IMPERIAL THREADED Threaded rod is a fastening UNC / UNF/ BLACK RODS bar or a rod threaded along BSW its length.Comes in 1mt Lenghts Imperial NAME + IMAGE DESCRIPTION DIN MATERIAL THREAD FINISH ROUND SOLID RIVETS A solid steel rivet that 123R BLACK / E/G consists of a smooth cylindrical shaft with a Round head on one end CSK SOLID RIVETS A solid steel rivet that 123CSK BLACK / E/G consists of a smooth cylindrical shaft with a CSK head on one end CUP SOLID RIVETS A solid steel rivet that 123CUP BLACK / E/G consists of a smooth cylindrical shaft with a CUP head on one end FLAT SOLID RIVETS A solid steel rivet that 123F BLACK / E/G consists of a smooth cylindrical shaft with a FLAT head on one end HAMMER DRIVE RIVETS Drive rivets are commonly HAM E/Y used to hold nameplates into blind holes. They typically have spiral threads that grip the side of the hole. .