TL3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors, TANTAMOUNT™, Molded Case, Very Low DCL FEATURES • DC leakage at 0.005 CV • Low ESR options • Qualified to EIA-717 Available • 100 % surge current tested (B, C, D, and E case sizes) Available • Improved reliability: 0.50 % / 1000 h, 85 °C, rated voltage • Molded case available in five case codes Available • Terminations: 100 % matte tin standard, tin / lead available LINKS TO ADDITIONAL RESOURCES • Compliant terminations 3D 3D T • Compatible with “high volume” automatic pick and place 3D Models Calculators Related Did You Technical equipment Documents Know Notes • Moisture sensitivity level 1 • Standard EIA-535-BAAC case size (A through E) PERFORMANCE / ELECTRICAL • Material categorization: for definitions of compliance CHARACTERISTICS please see www.vishay.com/doc?99912 Note www.vishay.com/doc?40192 * This datasheet provides information about parts that are Operating Temperature: -55 °C to +125 °C RoHS-compliant and / or parts that are non RoHS-compliant. For (above 85 °C voltage derating is required) example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Capacitance Range: 0.1 μF to 470 μF Capacitance Tolerance: ± 10 %, ± 20 % APPLICATIONS • Industrial Voltage Rating: 4 V to 50 V • Telecom infrastructure Note • Consumer • For recommended voltage derating guidelines see “Typical Performance Characteristics” • Medical • General purpose ORDERING INFORMATION TL3 D 107 K 010 C 0100 TYPE CASE CODE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION ESR TOLERANCE RATING AT +85 °C AND PACKAGING See Ratings This is expressed K = ± 10 % This is expressed in Matte tin Maximum 100 kHz and Case in picofarads. The M = ± 20 % volts. To complete C = 7" (178 mm) reel ESR in m. Codes table first two digits are the three-digit block, D = 13" (330 mm) reel See note below. significant figures. zeros precede the V = 7" (178 mm) reel, The third is the voltage rating. number of zeros A decimal point is dry pack to follow. indicated by an “R” U = 13" (330 mm) reel, (6R3 = 6.3 V). dry pack Tin / lead E = 7" (178 mm) reel F = 13" (330 mm) reel T = 7" (178 mm) reel, dry pack W = 13" (330 mm) reel, dry pack Notes • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating • The EIA and CECC standards for low ESR solid tantalum chip capacitors, allow delta ESR of 1.25 times the datasheet limit after mounting • Dry pack as specified in J-STD-033 Revision: 30-Mar-2020 1 Document Number: 40154 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TL3 www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L W TW H Glue Pad TH (MIN.) Glue Pad P CASE CODE EIA SIZE L W H P TW TH (MIN.) 0.126 ± 0.008 0.063 ± 0.008 0.063 ± 0.008 0.031 ± 0.012 0.047 ± 0.004 0.028 A 3216-18 [3.2 ± 0.20] [1.6 ± 0.20] [1.6 ± 0.20] [0.80 ± 0.30] [1.2 ± 0.10] [0.70] 0.138 ± 0.008 0.110 ± 0.008 0.075 ± 0.008 0.031 ± 0.012 0.087 ± 0.004 0.028 B 3528-21 [3.5 ± 0.20] [2.8 ± 0.20] [1.9 ± 0.20] [0.80 ± 0.30] [2.2 ± 0.10] [0.70] 0.236 ± 0.012 0.126 ± 0.012 0.098 ± 0.012 0.051 ± 0.012 0.087 ± 0.004 0.039 C 6032-28 [6.0 ± 0.30] [3.2 ± 0.30] [2.5 ± 0.30] [1.3 ± 0.30] [2.2 ± 0.10] [1.0] 0.287 ± 0.012 0.169 ± 0.012 0.110 ± 0.012 0.051 ± 0.012 0.094 ± 0.004 0.039 D 7343-31 [7.3 ± 0.30] [4.3 ± 0.30] [2.8 ± 0.30] [1.3 ± 0.30] [2.4 ± 0.10] [1.0] 0.287 ± 0.012 0.169 ± 0.012 0.157 ± 0.012 0.051 ± 0.012 0.094 ± 0.004 0.039 E 7343-43 [7.3 ± 0.30] [4.3 ± 0.30] [4.0 ± 0.30] [1.3 ± 0.30] [2.4 ± 0.10] [1.0] Note • Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option) RATINGS AND CASE CODES μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.10 A (20.00, 10.00) A (19.00, 10.00) A (17.00, 10.00) / 0.15 A (18.00, 6.00) B (14.00, 9.00) 0.22 A (15.00, 6.00) B (12.00, 8.50) 0.33 A (14.00, 10.00) A (13.00, 6.00) B (10.00, 4.50) A (10.00, 4.00) / B (8.40, 4.00) / 0.47 A (12.00, 9.00) A (12.00, 9.00) B (8.00, 2.50) C (6.70, 1.80) 0.68 A (11.00, 8.00) A (10.00, 8.00) B (7.00, 5.00) B (6.50, 2.50) C (5.90, 1.60) A (7.60, 4.00) / A (7.50, 6.00) / B (6.70, 2.00) / 1.0 A (9.30, 6.00) A (9.30, 6.00) A (8.40, 5.50) B (5.00, 2.00) B (5.00, 2.00) C (4.60, 1.60) B (4.20, 3.00) / C (3.40, 1.50) / 1.5 A (8.00, 6.00) A (8.00, 6.00) A (8.00, 6.00) B (4.60, 2.50) B (4.60, 2.00) C (3.80, 1.50) D (2.90, 1.00) A (6.30, 4.00) / 2.2 A (7.60, 6.00) A (7.60, 6.00) B (4.60, 2.50) A (5.90, 4.00) / B (3.80, 2.30) / B (3.80, 2.30) / C (2.90, 1.50) / B (3.50, 1.50) C (2.90, 1.00) C (2.90, 0.90) D (2.10, 0.80) B (3.10, 1.50) / B (3.50, 1.50) / 3.3 A (7.60, 4.00) A (6.30, 5.00) B (3.50, 2.50) B (3.50, 2.00) B (3.00, 1.30) C (2.30, 1.00) C (2.10, 0.70) D (1.70, 0.80) A (5.50, 3.50) / 4.7 A (6.30, 3.50) A (5.50, 3.50) / A (5.00, 3.00) / A (3.50, 2.50) / B (2.90, 1.00) / B (2.80, 1.50) / C (1.90, 0.60) / D (1.20, 0.60) B (3.40, 1.80) B (3.40, 1.50) B (2.90, 1.50) C (2.30, 0.60) C (2.0, 0.525) D (1.30, 0.60) C (1.70, 0.50) / C (1.80, 0.900) / 6.8 B (4.50, 2.00) B (3.40, 1.20) B (2.90, 1.20) C (1.90, 0.60) C (1.90, 0.55) D (1.20, 0.35) D (1.10, 0.30) E (0.90, 0.54) A (3.00, 1.70) / B (2.30, 1.30) / 10 B (3.50, 1.20) B (2.90, 1.00) A (3.40, 2.00) / B (2.80, 0.80) / B (2.50, 1.00) / C (1.50, 0.45) / C (1.60, 0.85) / E (0.80, 0.55) C (1.80, 0.55) C (1.80, 0.45) C (1.70, 0.45) D (1.00, 0.30) D (0.80, 0.30) A (2.90, 2.00) / C (1.20, 0.425) / 15 B (2.90, 1.20) C (1.80, 0.60) C (1.80, 0.50) B (2.00, 0.80) D (0.90, 0.30) D (0.80, 0.25) D (0.80, 0.30) A (2.90, 2.00) / B (1.90, 1.00) / C (1.20, 0.375) / C (1.20) / D (0.70, 0.40) / 22 C (1.80, 0.60) A (2.50, 1.50) D (0.80, 0.25) D (0.70, 0.225) D (0.70, 0.20) E (0.60, 0.300) B (1.90, 0.60) / B (1.80, 0.50) / 33 A (2.90, 1.50) / B (1.90, 0.60) / C (1.40, 0.35) / C (1.10, 0.30) / D (0.70, 0.20) D (0.70, 0.30) / C (1.80, 050) C (1.50, 0.40) D (0.80, 0.25) D (0.70, 0.225) E (0.60, 0.20) B (2.00, 0.55) / B (1.80, 0.60) / 47 B (2.50, 0.60) / C (1.40, 0.30) / C (1.10, 0.30) / C (1.00, 0.30) / D (0.70, 0.20) / D (0.70, 0.35) / C (1.80, 0.40) D (0.80, 0.20) D (0.70, 0.20) D (0.70, 0.15) E (0.60, 0.15) E (0.60, 0.30) D (0.70, 0.175) / 68 D (0.80, 0.175) D (0.70, 0.20) D (0.70, 0.15) D (0.60, 0.15) E (0.60, 0.15) B (1.80, 0.45) / B (1.70, 0.70) / C (0.90, 0.20) / D (0.60, 0.125) / 100 D (0.70, 0.175) D (0.70, 0.14) D (0.60, 0.10) E (0.60, 0.10) E (0.50, 0.15) D (0.60, 0.125) / 150 D (0.60, 0.15) E (0.50, 0.10) D (0.60, 0.10) E (0.50, 0.15) C (0.70, 0.30) / 220 D (0.60, 0.10) / D (0.60, 0.36) / E (0.50, 0.10) E (0.50, 0.10) 330 E (0.50, 0.10) E (0.50, 0.10) E (0.50, 0.10) 470 E (0.50, 0.20) Revision: 30-Mar-2020 2 Document Number: 40154 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.