INFLATABLE BOAT HULL FENDERS RedcoTM EPDM TM P60 TECHNICAL DATA SHEET Redwood Plastics and Rubber offers a specification grade COLOUR: BLACK of EPDM tested to ASTM standards for critical applications DUROMETER: 60A requiring weathering and UV resistance such as exterior DESIGNATION: EPDM, Ethylene Rubber, construction projects. (Ethylene-Propylene Diene Monomer) SHAPES: Sheet, strips SIZES: 1/16” through 1” thick Elasticity 0.8 0.6 Weatherstripping Grommets Cut & Tear Weather 0.4 Resistance Seal strips & caulking material Roll-covering for certain 0.2 Automotive parts chemical applications Gaskets & washers for electrical Refridgerator door seals 0 applications Marine fenders Mechanical Abrasion Properties Resistance Weather Resistant Natural Rubber Oil & Chemical Redco™ EPDM™ CG60 Redco™ EPDM™ P60 UV Resistant CORE ADVANTAGES: Ozone Resistant Excellent resistance to aging, ozone, Resistant to corrosive chemical products UV light, and practically unalterable and most inorganic chemicals including; Non-Conductive by weather dilute acids, detergents, phosphoric Excellent electrical properties and ethers, ketones, alcohol as well as low radiation stability molecular weight glycols Steam Service Very good flexibility at low temperatures Good performance in presence Temperature range -45ºC to +120ºC of hot water & steam Oil Resistant with formulations in continuous service up to +140ºC CAN 1.800.667.0999 [email protected] | www.redwoodplastics.com USA 1.866.733.2684 RedcoTM EPDMTM P60 PREMIUM EPDM RUBBER PROPERTY SPECIFICATION UNIT TYPICAL VALUE Durometer (Hardness) ASTM D 2240 Shore A 60 +/- 5 Specific Gravity ASTM D 792 g/cc 1.2 Tensile Strength ASTM D 412 PSI 800 Ultimate Elongation ASTM D 412 % 300 min. Compression Set ASTM D 395, % 50 22 hr @ +70ºC Method B Temperature Range ºC (ºF) -45º to +121ºC (-49º to +250ºF) Temperature Aging ASTM D 573 70 hrs @ +70ºC Durometer (Hardness) ∆ Shore “A” +/- 10 Tensile Strength % ∆ +/-25% max. Elongation % ∆ -25% max. Ozone Resistance ASTM D 1171 No Cracking 70hrs @50 PPHM @+40ºC Unless otherwise stated, all Redco sheet rubber is provided to standard RMA Rubber Tolerances. CHEMICAL RESISTANCE COMPOUND RESULT Acid Poor ASK US about our custom cutting, stamping and fabricating services. Alkali Average All sheet rubber products are available Gas & Oil Good in many formats, including: Aromatic Hydrocarbons Good Full rolls Blocks Ketones Excellent Sheets Custom-fabricated Chlorinated Solvent Average Cut- to-size strips Die-cut parts Steam Good Oxidation Excellent Redwood Plastics and Rubber offers a UV Excellent quick-ship process for in-stock sheet orders in as little as 24 hours if required. Ozone Excellent [email protected] CAN 1.800.667.0999 Contact Us for a Quotation. USA 1.866.733.2684.