Deconstruction and Materials Reuse CIB Publication 287 Proceedings of the 11th Rinker International Conference May 7-10, 2003 Gainesville, Florida, USA Edited by Abdol R. Chini, University of Florida TG 39 CIB, International Council for Research and Innovation in Building Construction Task Group 39: Deconstruction http://www.cce.ufl.edu/affiliations/cib Powell Center for Construction and Environment M.E. Rinker Sr., School of Building Construction College of Design, Construction and Planning http://www.cce.ufl.edu/ DISCLAIMER All rights reserved. No part of this book may be reprinted or reproduced or utilized in any form or by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying and recording, or in any information storage or retrieval system without permission in writing from the publishers. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability in whole or in part for any errors or omissions that may be made. The reader should verify the applicability of the information to particular situations and check the references prior to any reliance thereupon. Since the information contained in the book is multidisciplinary, international and professional in nature, the reader is urged to consult with an appropriate licensed professional prior to taking any action or making any interpretation that is within the realm of a licensed professional practice. CONTENTS PREFACE CIB INFORMATION DECONSTRUCTION TECHNIQUES AND TOOLS Paper 1 A SYSTEM FOR ESTIMATING RESIDENTIAL CONSTRUCTION AND DEMOLITION DEBRIS Ali Touran, James Wang, Christoforos Christoforou, Nasiru Dantata (Northeastern University, Boston, Massachusetts, United States of America) Paper 2 THE ELECTRO-HYDRAULIC COMMINUTION FOR THE SEPARATION OF OLD CONCRETE Elske Linß, Annette Mueller (Bauhaus-University of Weimar, Weimar, Deutschland) Paper 3 CREATING BUSINESS OPPORTUNITIES THROUGH THE USE OF A DECONSTRUCTION FEASIBILITY TOOL G. Bradley Guy (University of Florida, Powell Center for Construction and Environment, Gainesville, Florida, United States of America); Michael Ohlsen (Florida Department of Environmental Protection, Tallahasse, Florida, United States of America) Paper 4 RECOMMENDATIONS FOR THE USE OF AGGREGATES FROM RECYCLED CONSTRUCTION AND DEMOLITION WASTE IN VENEZUELA C.J. Suárez (Central-Western University, School of Civil Engineering, Barquisimeto, Venezuela) Paper 5 DECISION TOOLS FOR DEMOLITION TECHNIQUES SELECTION Arham Abdullah, Chimay J. Anumba (Loughborough University, Loughborough, United Kingdom); Elma Durmisevic (Delft University of Technology, Department of Building Technology, Delft, The Netherlands) Paper 6 DEALING WITH UNCERTAINTIES IN (DE-) CONSTRUCTION MANAGEMENT – THE CONTRIBUTION OF FUZZY SCHEDULING Frank Schultmann (University of Karlsruhe, French-German Institute for Environmental Research, Karlsruhe, Germany) Paper 7 AN INSTRUMENT FOR CONTROLLING IMPACTS IN USE AND DISMISSION PHASES Francesca Giglio, Alberto De Capua (ASTEC Department, Reggio Calabria, Italy) DECONSTRUCTION CASE STUDIES Paper 8 OVERTURE PROJECT DECONSTRUCTION IN MADISON, WI ACHIEVES 74% RECYCLING RATE Sonya Newnhouse, Amanda Fuller (Madison Environmental Group, Inc., Madison, Wisconsin, United States of America); Jenna Kunde (WasteCap Wisconsin, Inc., Madison, Wisconsin, United States of America) Paper 9 DECOMMISSION OF MANUFACTURING FACILITIES – A RECYCLING SUCCESS STORY Dennis Spors (Eastern Michigan University, Ypsilanti, Michigan, United States of America) Paper 10 DECONSTRUCTION CASE STUDY IN SOUTHERN ITALY: ECONOMIC AND ENVIRONMENTAL ASSESSMENT Paola Lassandro (National Research Council of Italy, Institute for Technologies of Construction ITC-CNR, Bari Section, Italy) Paper 11 RE-USE OF BUILDING COMPONENTS (TOWARDS ZERO WASTE IN RENOVATION) Peter A. Erkelens (Technische Universiteit Eindhoven, The Netherlands) Paper 12 DECONSTRUCTION OF EARTHQUAKE-DAMAGED BUILDINGS IN TURKEY Soofia Tahira Elias-Ozkan (Middle East Technical University, Ankara, Turkey) Paper 13 VALUING THE PRE-DEMOLITION AUDIT PROCESS James W. Hurley (Building Research Establishment, United Kingdom) DECONSTRUCTION AND MATERIALS REUSE BUSINESS DEVELOPMENT AND MARKETING Paper 14 ENVIRONMENTAL IMPACT OF CONCRETE RECYCLING, COMING FROM CONSTRUCTION AND DEMOLITION WASTE (C&DW) Beatriz Estévez, Antonio Aguado, Alejandro Josa (Universitat Politécnica de Catalunya, School of Civil Engineering, Barcelona, Spain) Paper 15 START UP AND DEVELOPMENT OF A FULL SCALE USED BUILDING MATERIALS STORE AND SALVAGE & DECONSTRUCTION BUSINESS IN A SMALL TOWN Bruce Odom (ODOM RE-USE Co., Traverse City, Michigan, United States of America) Paper 16 TECHNICAL DEVELOPMENT FOR DECONSTRUCTION MANAGEMENT Chunlu Liu; Sung Kin Pun (Deakin University, Geelong, Victoria, Australia); Yoshito Itoh (Nagoya University, Nagoya, Aichi, Japan) Paper 17 EVALUATING A DECONSTRUCTION BUSINESS MODEL George C. Penn, Steve Knudsen (Global Energy Options, Wisconsin, United States of America); Ingo Bensch (Energy Center of Wisconsin, Wisconsin, United States of America) Paper 18 THE URBAN EXPLORER CAPSULE – IMPROVEMENT OF REUSABLE BUILDING STRUCTURES MANAGEMENT Leszek Świątek (Technical University of Szczecin, Szczecin, Poland) Paper 19 HOW DO YOU IDENTIFY THE BEST PRACTICABLE ENVIRONMENTAL OPTION FOR CONSTRUCTION AND DEMOLITION WASTE Katherine Tebbatt Adams (Centre for Resource Management, Building Research Establishment, United Kingdom) REUSE AND RECYCLING OPPORTUNITIES AND CONSTRAINTS Paper 20 BARRIERS IN MINIMISING CONSTRUCTION WASTE Rubina Greenwood (Cardiff University, Welsh School of Architecture, United Kingdom) Paper 21 THE CONDITIONS AND CONSTRAINTS FOR USING REUSED MATERIALS IN BUILDING PROJECTS Mats Eklund (Linköping University, Linköping, Sweden); Svante Dahlgren (TP Property Consultant, Norrköping, Sweden); Agnetha Dagersten (Stångåstaden Housing Company, Linköping, Sweden); Gunnar Sundbaum (Sundbaums AB, Linköping, Sweden) Paper 22 RECYCLING GYPSUM DRYWALL RECOVERED FROM DECONSTRUCTION PROJECTS: A TECHNOLOGY AND MARKET OVERVIEW Timothy G. Townsend (University of Florida, Gainesville, Florida, United States of America); Kimberly Cochran (R.W. Beck, Orlando, Florida, United States of America) Paper 23 OVERCOMING THE BARRIERS TO DECONSTRUCTION AND MATERIALS REUSE IN NEW ZEALAND John B. Storey, Maibritt Pedersen (Victioria University of Wellington, Centre for Building Performance Research, Wellington, New Zealand) DESIGN FOR DECONSTRUCTION AND MATERIALS REUSE Paper 24 LIFE CYCLE COORDINATION OF MATERIALS AND THEIR FUNCTIONS AT CONNECTIONS DESIGN FOR TOTAL SERVICE LIFE OF BUILDINGS AND ITS MATERIALS Elma Durmisevic, T.M. van Iersel (Delft University of Technology, Department of Building Technology, Delft, The Netherlands) Paper 25 KNOWLEDGE MODEL FOR ASSESSING DISASSEMBLY POTENTIAL OF STRUCTURES Elma Durmisevic, Ő. Ciftcioglu (Delft University of Technology, Department of Building Technology, Delft, The Netherlands); Chimay J. Anumba (Loughborough University, Center for Innovative Construction Engineering, Loughborough, United Kingdom) Paper 26 OPTIMIZING DECONSTRUCTION OF LIGHTWOOD FRAMED CONSTRUCTION Abdol R. Chini, Hai T. Nguyen (University of Florida, Powell Center for Construction and Environment, Gainesville, Florida, United States of America) Paper 27 PROGRAMMATIC FLUX, CAN YOU COPE? A FIRST INTRODUCTION TO THE “TIMESHIFTING-MODEL” Klaas Nienhuis, Niels Woesthuis, Ir. Jean W. Frantzen (Delft University of Technology, Delft, The Netherlands) Paper 28 DESIGN FOR EASY TO DECONSTRUCT AND EASY TO RECYCLE WOODEN BUILDING (SEE FOOTNOTE) Shiro Nakajima, Masashi Miyamura (Building Research Institute, Tsukuba, Ibaraki, Japan); Makoto Kawai, Mayumi Hiraoka (Mitsui Home Co., Ltd., Chiyoda, Tokyo, Japan) Paper 29 A DECONSTRUCTABLE CARPARKING BUILDING IN AN ACTIVE SEISMIC ZONE Morten Gjerde, John Storey, Maibritt Pedersen (Victoria University, Centre for Building Performance Research, Wellington, New Zealand) Paper 30 BUILDING’S TRANSFORMATION CAPACITY AS THE INDICATOR OF SUSTAINABILITY; TRANSFORMATION CAPACITY OF FLEXIBLE HOUSING (SEE FOOTNOTE) Bart J.H. te Dorsthorst, Elma Durmicevic (Delft University of Technology, Department of Building Technology, Delft, The Netherlands) Paper 31 RE-USE POTENTIAL OF STEEL IN BUILDING CONSTRUCTION Elma Durmisevic (Delft University of Technology, Department of Building Technology, Delft, The Netherlands); Nico Noort (Corus Colors, The Netherlands) Paper 32 DECONSTRUCTION AND DESIGN FOR REUSE: CHOOSE TO REUSE Timothy J. Williams; G. Bradley Guy (University of Florida, Powell Center for Construction and Environment, Gainesville, Florida, United States of America) Paper 33 THE DIS-ASSEMBLY DEVELOPMENT OF SERVICE LIFE BASED CONSTRUCTED WORKS DP Wyatt (TR12 6SE. United Kingdom) REGULATORY, CONTRACTUAL AND POLICY ISSUES Paper 34 WASTE MANAGEMENT PRACTICES IN UNITED STATES GREEN BUILDING PROGRAMS Audrey K. Tinker, Dr. Richard A. Burt (Texas A&M University, College Station, Texas, United States of America) Paper 35 “GREEN” DEMOLITION CERTIFICATION G. Bradley Guy, Timothy Williams (University of Florida, Powell Center for Construction and Environment, Gainesville, Florida, United States of America) MILITARY BASE DECONSTRUCTION Paper 36 ENVISIONING THE IDEAL BUILDING REMOVAL PROGRAM (FOR CLOSED AND ACTIVE MILITARY BASES) Michael Houlemard, Stan Cook (Fort Ord Reuse Authority, Marina, California, United States of America) • This file could not be converted