India-UK SPARC Webinar on Metal Additive Manufacturing And Friction Stir Processing: Present and Future 16-17 September, 2020 Unlocking The Future With Metal Based Additive Manufacturing and Fabrication of Smart Materials/Structures Using Friction Stir Processing Technique Prof. Amitava De Dr. Murshid Imam Day 1 (Timing: 1.40 PM - 7.05 PM IST) Department of Assistant Professor Mechanical Engineering Department of Mechanical IIT Bombay, India Engineering, IIT Patna, India Prof. Hidetoshi Fujii Mr. Habib, HAMED ZARGARI Vice-Director, JWRI, Prof. Pankaj Biswas Osaka University, Japan Phd student, Prof. ITO Lab. JWRI, Osaka University, Department of Mechanical Japan Engineering, IIT Guwahati Prof. Yutaka S. Sato Graduate School of Prof. Vikranth Racherla Dr. Mohd Zaheer Khan Yusufzai Engineering, Tohoku Department of Mechanical Associate Professor, Department University, Japan Engineering,IIT Kharagpur, of Mechanical Engineering India IIT BHU, India Prof. Satish V. Kailas Dr. Viswanath Chinthapenta Dr. Devinder Yadav Department of Mechanical Assistant Professor Assistant Professor Engineering, Indian Institute Department of Mech. and Metallurgical and Materials of Science, Bangalore, India Aerospace Engg, IIT Hyderabad Engineering, IIT Patna, India Day 2 (Timing: 1.40 PM - 7.15 PM IST) Dr. Enrique Jimenez-Melero Prof. Aude Simar, Senior Lecturer, Department Materials and Process Dr. Amit Arora, of Radiation Materials Science Engineering, Université Assistant Professor, School of Materials, United Kingdom catholique de Louvain, Materials Science and Engineering, Belgium IIT Gandhinagar, India Prof. Abhay Sharma. Department of Materials Engineering Dr. Buchibabu Vicharapu Assistant Professor, Prof. Janaki Ram G. D. KU Leuven, Belgium Mechanical Engineering, Department of Materials IIT Palakkad, India Science and Metallurgical Prof. Roger Webb, Engineering, IIT Hyderabad,India Director of Ion Beam Centre, Dr. Mohammad Talha University of Surrey, United Kingdom Associate Professor Prof. Dheerendra Kr. Dwivedi School of Engineering, Department of Mechanical and Prof. Tarasankar Debroy, IIT Mandi, India Industrial Engineering, Department of Materials IIT Roorkee, India Science and Engineering, Pennsylvania State @ For queries, University, USA contact: [email protected]/or [email protected].