AXIS and AirLink modems Application Note 2170046 Rev 2.0 Using a Sierra Wireless AirLink Raven X or Raven XE with an Axis Network Camera An Axis network camera can be described as a camera and computer combined in one intelligent unit. It captures and sends live video directly over an IP network such as a LAN, intranet or the Internet and enables users to view and/or manage the camera using a standard Web browser or video management software on any local or remote computer on a network. It allows authorized viewers from different locations to simultaneously access images from the same network camera. • Stand‐Alone With a built‐in Web server, Axis network cameras do not need a direct connection to a PC or any other hardware or software to capture and transfer images. They operate as stand‐alone units and require only a connection to an IP network by wired or wireless means. • Security Remote and cost‐effective monitoring using streaming video, sequentially uploaded images at a certain frequency, and/or built‐in motion detection with pre‐ and post‐alarm buffers helps to secure people, property and industrial processes. • Alarm or Sensor Triggered Events Digital inputs that are connected to alarm devices or sensors can, for instance, be used to trigger the transmission of images from a camera to a select destination for recording, or request that e‐mail alerts or SMS notification be sent, for example, to a mobile phone. • Control Other Devices Digital outputs enable you to remotely, or automatically upon alarm, close or open doors, turn lights on or off, or control other devices. Network cameras also have image buffers that can save and send the images collected before an alarm occurred. • Audio Besides visually being able to see remotely from any networked computer, anywhere and at any time, Axis also provides products that enable two‐way audio communication over networks. With both visual and audio communication, Rev 2.0 Dec.08 3 Axis connected to Raven X and Raven XE you can question intruders, conduct remote education, troubleshooting, or broadcast both sights and sounds of a location or event on Web sites. The Axis Network camera is designed to connect directly to an Ethernet network and be assigned a public Internet address. However, in remote locations, a wired Ethernet network might not be practical and the range possible with a wireless LAN can be too limiting. The Sierra Wireless AirLink Raven X or Raven XE provides a cellular solution for the Axis Network camera providing an unparalleled flexibility of location. The rugged design of AirLink modems makes it practical for any location where surveillance might be desired. Figure 1: Axis Network Camera with a Raven XE • Flexible Location An Axis Network camera connected to an AirLink cellular modem can be placed in a spot which cannot be or is not cost effective to be wired into an Ethernet network. • Quick Deployment Since the Raven X or Raven XE uses an existing network with the cellular connection, there is no need to plan Ethernet wire “drops”. As soon as the modem is activated, it can connect to the cellular network and the camera can begin transmitting through the modem. • Versatility An Axis Network camera using a Raven X or Raven XE could be moved to a new location, quickly and easily, no wires to move, no local wireless transmitters to reposition. • Rugged Construction 4 2170046 With a hardened case and an operating temperature range of ‐ 30 degrees C to +60 degrees C, AirLink modems are suitable for industrial or other harsh environments. Note: The modem is not sealed against weather, dust, or other elemental condi‐ tions. • Software Tools Enhanced with the intelligence of ALEOS, Sierra Wireless AirLink modems are equipped with the AceWare(TM) suite of remote management software tools. AceWare lowers total cost of ownership by simplifying installation and deployment, and enabling remote device configuration, management and troubleshooting. • Dynamic DNS One of the many features of ALEOS is the ability to configure an AirLink modem to work with a dynamic DNS server. Even without a static IP, the Raven X or Raven XE, and the Axis Network Camera with it, can be contacted from anywhere on the Internet. Easy Configuration The step by step configuration outlined in this guide allows an Axis Network Camera to use a Sierra Wireless AirLink Raven X or Raven XE for remote access. Note: The 211/211A and 214 cameras were tested with this configu- ration; however, other Axis Network Cameras with a similar configu- ration will also work. Warning: This document is intended to provide suggestions for communications setup only, and in no way commits Sierra Wireless to provide consulting, integration, or technical support for any Axis Camera Server or the integration of such with any Sierra Wireless product. The assembly and integration of the Sierra Wireless AirLink Raven X or Raven XE modem and the Axis Network Camera is the responsibility of a technology solutions integrator or end-customer, as neither Sierra Wireless nor Axis sell or support such an integrated solution. Rev 2.0 Dec.08 5 Axis connected to Raven X and Raven XE Before You Start You will need to decide if you want the modem to pass the IP address it receives to the camera (Public Mode) or if you want the modem and the camera to be on a local network with a static IP which is not Internet routable (Private Mode). If you choose Private Mode, you will need IP addresses for both the camera and the modem. The IP addresses will need to be on the same subnet and local to each other. Generally, you will want to use a 192.168.x.x address for both. The third octet (set of numbers) will need to be the same and the last octet will need to be different. • Example IP for the modem: 192.168.13.31 • Example IP for the camera: 192.168.13.30 Caution: If the modem and the camera are going to be on a hub which is connected to a local network, you will need to be sure the addresses you select are not used by any other device on the network. Consult with your network administrator if you are unsure. Software Required • AceManager ‐ Graphical interface for configuring your AirLink modem. You can download the most recent version of AceManager from the Sierra Wireless AirLink Solutions website: http://www.sierrawireless.com. A default installation of this utility is assumed later in these directions. • Axis IP Utility ‐ Axis provides a small utility with their cameras which you can use to set the initial IP of the camera so you can connect to its internal web server where you can configure it. If you do not have the CD that came with your camera, you can obtain the Axis IP Utility from the Axis website: http://www.axis.com. Software Recommended • AceManager ‐ Deeply integrated with ALEOS, AceManager provides comprehensive remote management and configuration for AirLink wireless gateways. AceManager is available for all customers for free of charge.. • AceNet ‐ Multiple modem configuration and monitoring utility for all AirLink modems. With AceNet, you can save a working configuration in AceManager and then load it into several modems concurrently saving time and 6 2170046 ensuring all the modems are configured the same. AceNet is available for separate purchase from your Sierra Wireless AirLink Solutions representative. Hardware Required • Ethernet Cable ‐ A cross‐over or straight through Ethernet cable. If you have a Raven X or if your computer is equipped with an auto‐sensing Ethernet port, you have the option of using a straight‐through Ethernet cable. • Power supplies and a power source ‐ You will need a power supply and power source for both the AirLink modem and the Axis camera. • PC or Laptop ‐ To configure both the Axis camera and the AirLink modem, you will need a computer with an available Ethernet port. Cellular Account Required • Cellular Account ‐ To use this guide you need to already have an active account with a cellular provider and to have activated your modem with that provider. Sierra Wireless AirLink Solutions modems are certified to work with a variety of cellular providers. If you need to activate your modem, you can use the Setup Wizard for your cellular provider which you can obtain from the Sierra Wireless AirLink Solutions website: http:// www.sierrawireless.com/support/. Important Information about Cellular Networks • HTTP (web server) Port ‐ Many cellular providers and other ISPs block port 80 which is the default port for HTTP (web‐based communication). If your provider blocks this port, you will need to configure a port you can access. Some providers also block port 8080, another commonly used port for HTTP. • Upload Speed for 2G and early 3G cellular technologies (1x, GPRS, EDGE, iDEN, and EV‐DO Rev0) ‐ These technologies have a much lower upload (transmit) speed than download. In addition, many cellular providers can “throttle” the upload speeds of devices connected to their networks, reducing the amount of upload traffic. Even with good signal, it is not uncommon to see upload speeds of only 60 to 100kbps while you have download speeds in Rev 2.0 Dec.08 7 Axis connected to Raven X and Raven XE excess of 600kbps (2G) or 1000kbps (3G). The framerate of your camera in a live stream configuration will be heavily impacted by the upload speed you can attain on your provider’s network. • Upload Speed for Cellular “Broadband”‐ The Raven X and the Raven XE have the ability to connect at EV‐DO Rev A or HSUPA speeds.