Setting the clock / Storing stations automatically / Display items for CD / Repeat and shuffl e play / Adjusting the sound characteristics / Customizing the CDX-GT710 equalizer curve / Adjusting setup items Location of controls and basic operations Detaching the front panel SOUND button To change display items/select PTY in RDS. To tune in stations automatically (press); You can detach the front panel of this unit to Main unit To enter sound setting. After pressing , press to fi nd a station manually (press and hold). prevent theft. search for a station. ENTER button VOL (volume) +/– button 1 Press . 123465 789 q; To apply a menu setting. Number buttons To adjust volume. The unit is turned off. CD/MD*1: Receptor for the card remote ATT (attenuate) button : REP 2 Press . To attenuate the sound. To cancel, press again. The left side of front panel is released. PUSH SOUND / ENTER ANGLE commander : SHUF /: GP*3/ALBM*4 –/+ SOUND button MODE MENU button 3 Slide the front panel to the left, then MENU To skip groups/albums (press); skip SEEK To enter menu. To enter sound setting. gently pull out the front panel towards groups/albums continuously (press and you. IMAGE IMAGE button hold)*5. (+) / (–) buttons SEEK 6 To select preset stations/skip groups (press); LIST AUX To select the display image. : BBE MP* SOURCE PTYREP SHUFGP/ALBM BBE MP PAUSE Movie mode 1-3 Spectrum analyzer To activate the BBE MP function, set skip groups continuously (press and hold). DSPL 123456AF/TA OFF mode 1-5 wall paper mode 1-3 “BBE MP on.” To cancel, set “BBE SCRL (scroll) button normal play/reception mode MP off.” To scroll the display item. CDX-GT710 : PAUSE*6 RESET button (Location behind the front Number buttons (OFF) qa qs qdqf qg qh qj qk panel) To pause playback. To cancel, press again. CD/MD*1: Notes : REP • Before operating the unit for the fi rst time, or Radio: Card remote commander To receive stored stations (press); store : SHUF Before using the card remote commander for the after replacing the car battery or changing the 6 connections, you must reset the unit. stations (press and hold). : PAUSE* RM-X154 fi rst time, remove the insulation fi lm. To pause playback. To cancel, press • Pressing the RESET button will erase the clock AF/TA button Attaching the front panel setting and some stored contents. again. AF (Alternative Frequencies)/TA (Traffi c Place the hole of the front panel onto the qj ws Radio: spindle on the unit, then lightly push the left OFF ATT Disc slot Announcement), TP (Traffi c Programme): To receive stored stations (press); store wd Insert the disc (label side up), and playback Each time you press , the item side in. qs stations (press and hold). SOURCE SOUND MODE starts automatically. You can play CD-DA changes as follows: Press on the unit (or insert a disc) to 5 2 (also containing CD TEXT), CD-R/CD-RW operate the unit. MENU LIST AF-ON TA-ON AF, TA-ON *1 When an MD changer is connected. (MP3/WMA/AAC fi les also containing *2 When a CD/MD changer is connected. + qd AF, TA-OFF ql Multi Session) and ATRAC CD (ATRAC3 *3 When an ATRAC CD is played. SEEK +/– control ENTER wf and ATRAC3plus format). OFF button *4 When an MP3/WMA/AAC is played. CD/MD*1: To power off; stop the source. *5 If the changer is connected, the operation is different. w; – Display window To skip tracks (press up/down); skip tracks *6 When playing back on this unit. AUX input jack DSPL/PTY SCRL continuously (press up/down, then press (eject)/ANGLE button qf wg Note REP SHUF up/down again within about 1 second and To eject the disc/slide down the front panel To connect a portable audio device. 132 hold); reverse/fast-forward a track (press (press); angle the front in 3 position (press If the unit is turned off and the display disappears, it PAUSE wh The following buttons on the card remote cannot be operated with the card remote commander 465 up/down and hold). and hold). commander have also different buttons/functions unless on the unit is pressed, or a disc is Radio: (front panel release) button from the unit. inserted to activate the unit fi rst. A To tune in stations automatically (press + SOURCE button ENTER buttons wa VOL up/down); fi nd a station manually (press B – up/down and hold). To power on; change the source (Radio/CD/ To complete a setting. Warning if your car’s ignition has no 1 ACC position MD* /AUX). / (SEEK –/+) buttons MODE button Be sure to set the Auto Off function. The unit LIST button 1 To select the radio band (FM/MW/LW); CD/MD* : will shut off completely and automatically in select the unit*2. To list up. To skip tracks (press); skip traks the set time after the unit is turned off, which continuously (press, then press again within Volume control dial DSPL (Display)/PTY (Program Type) prevents battery drain. If you do not set the about 1 second and hold); fast-forward/ To adjust volume. button Auto Off function, press and hold reverse a track (press and hold). until the display disappears each time you Radio: turn the ignition off. © 2006 Sony Corporation Location of controls and basic operations / Detaching the front panel SET UP CD SET UP RADIO CD USB SET UP RADIO CD USB Display Setting the clock Display items for CD Adjusting the sound Adjusting setup items — MENU Auto Image The clock uses a 24-hour digital indication. characteristics 1 Press . To set various display images. – “All”: to step repeatedly through the display 1 Press . 1 Press . 2 Rotate the volume control dial until images in all display modes. the desired menu item appears, then – “Movie” (): to display a movie. 2 Rotate the volume control dial until 2 Rotate the volume control dial until press . “Clock Adjust” appears, then press the desired menu item appears, then – “SA”: to display the Spectrum analyzer. – “off”: to not display any image. press . 3 Rotate the volume control dial to The clock adjustment display appears. select the setting, then press . Rotate the volume control dial to Info (Information) 3 The setting is complete. To display the items (depending on the source, etc.). 3 Rotate the volume control dial to set select the setting, then press . – “Simple” (): to not display any items. the hour and minute. Source (CD/ATRAC/WMA/MP3/AAC) 4 Press . The setting is complete. – “All”: to display all items. To move the digital indication, press indication After 3 seconds, the setting is complete and The display returns to normal play/reception Clock mode. – “Clear”: to have items automatically +/–. the display returns to normal play/reception disappear. Track/album/group number, disc/artist/album/ After setting the minute, press mode. 4 group/track name, Elapsed playing time, Note Demo*1 (Demonstration) . Displayed items will differ, depending on the source information The following items can be set: To set “on” () or “off.” The clock starts. “” indicates the default settings. and setting. Dimmer Tip * Album/group number is displayed only when the The following items can be set: album/group is changed. To change the brightness of the display. You can set the clock automatically with the RDS feature. “ ” indicates the default settings. – “Auto” (): to dim the display automatically For details, see “Adjusting setup items” on this sheet, To change display items , press ; and set to “CT on” (Clock Time). EQ3 parametric when you turn lights on. scroll display items , press on the To select an equalizer type: “Xplod,” “Vocal,” Setup – “on”: to dim the display. card remote commander or set “Auto Scroll on.” “Edge,” “Cruise,” “Space,” “Gravity,” “Custom” – “off”: to deactivate the dimmer. Clock Adjust or “off” (). Illumination To set the clock. RADIO DSO To change the illumination color: “Blue” () or CT (Clock Time) “Red.” CD To select the DSO mode: “1,” “2,” “3” or “off” Storing stations automatically (). The larger the number, the more enhanced To set “on” or “off” (). Auto Scroll the effect. — BTM Repeat and shuffl e play Beep To scroll long displayed item automatically Balance To set “on” () or “off.” when the disc/album/group/track is changed. The unit selects strong signal stations and stores 1 During playback, press (REP) To adjust the balance between the right and left – “on” (): to scroll. them. You can store up to 6 stations per band RM (Rotary Commander) – “off”: to not scroll. or (SHUF) repeatedly until the speakers: “R10” – “0” () – “L10” To change the operative direction of the rotary (FM1, FM2, FM3, MW, or LW). desired setting appears. Fader commander controls. Receive Mode Caution To adjust the balance between the front and rear – “NORM” (): to use the rotary commander in Select To play When tuning in stations while driving, use Best speakers: “F10” – “0” () – “R10” the factory-set position. Local (Local Seek Mode) Tuning Memory (BTM) to prevent an accident. Repeat Track track repeatedly. – “REV”: When you mount the rotary – “off” (): to tune normal reception. Subwoofer commander on the right side of the steering 1 To adjust the subwoofer volume: “+10” – “0” – “on”: to only tune into stations with stronger 1 Press repeatedly until Repeat Album* album repeatedly. column. signals. () – “–10” “TUNER” appears. Repeat Group*2 group repeatedly. 8 Auto Off 2 To change the band, press ( “– ” is displayed at the lowest setting.) Mono* (Monaural Mode) To shut off automatically after a desired time repeatedly. You can select from FM1, FM2, Shuffl e Album*1 album in random order.