VISAGE Version 2016.1 VISAGE Proprietary notice Copyright © 2016 Schlumberger. All rights reserved. Reproduction or alteration without prior written permission is prohibited, except as allowed under applicable law. Use of this product is governed by the License Agreement. Schlumberger makes no warranties, express, implied, or statutory, with respect to the product described herein and disclaims without limitations any warranties of merchantability or fitness for a particular purpose. Trademarks & service marks "Schlumberger," the Schlumberger logotype, and other words or symbols used to identify the products and services described herein are either trademarks, trade names, or service marks of Schlumberger and its licensors, or are the property of their respective owners. These marks may not be copied, imitated, or used, in whole or in part, without the express prior written permission of their owners. In addition, covers, page headers, custom graphics, icons, and other design elements may be service marks, trademarks, and/or trade dress of Schlumberger and may not be copied, imitated, or used, in whole or in part, without the express prior written permission of Schlumberger. Security notice The software described herein is configured to operate with at least the minimum specifications set out by Schlumberger. You are advised that such minimum specifications are merely recommendations and not intended to be limiting to configurations that may be used to operate the software. Similarly, you are advised that the software should be operated in a secure environment whether such software is operated across a network, on a single system and/or on a plurality of systems. It is up to you to configure and maintain your networks and/or system(s) in a secure manner. If you have further questions as to recommendations regarding recommended specifications or security, please feel free to contact your local Schlumberger representative. VISAGE Table of Contents Introduction ....................................................................................................................... 1 Platform Availability ................................................................................................................................... 1 Supported Platforms for Licensing .......................................................................................................... 1 Preparing to Install VISAGE ...................................................................................................................... 1 DVD Organization ....................................................................................................................................... 2 Installing VISAGE on Windows ....................................................................................... 3 To Install the VISAGE Simulator ............................................................................................................... 3 Installing Intel MPI .................................................................................................................................... 3 Installed Directory Structure ..................................................................................................................... 4 Installing VISAGE on Linux .............................................................................................. 5 To install the VISAGE Simulator ............................................................................................................... 5 Configuring Intel or Platform MPI for Linux ............................................................................................... 6 SSH Configuration ................................................................................................................................ 7 Using LSF Queuing ............................................................................................................................... 8 Installed Directory Structure ..................................................................................................................... 9 Installing OFED Drivers ........................................................................................................................... 10 General InfiniBand Notes ........................................................................................................................ 10 Schlumberger Licensing ......................................................................................................................... 10 GPU Installation .............................................................................................................. 11 Limitations ................................................................................................................................................ 11 GPU Driver ................................................................................................................................................ 11 GPU Hardware .......................................................................................................................................... 11 i VISAGE ii VISAGE Introduction Platform Availability Platform Operating System Required Software Notes Windows Windows 7 Professional 64 Intel MPI 5.*.* (included but 32 bit is not supported. SP1 requires installation). Linux Redhat Enterprise Linux Intel MPI 5.*.* (included and A scheduling system us Server 6 Update 3 (x86_64) or automatically installed). recommended. LSF 9.1 or later. later. Platform MPI 9.1 (included and 32 bit is not supported. automatically installed). Windows Windows 2012 R2 HPC Intel MPI not required. Cluster Supported Platforms for Licensing Windows • The supported platforms are: Windows 8.1 (64bit) ; Windows 7 (64bit) Professional — Service Pack 1 ; Windows 2012 R2 HPC (64bit) . Linux • The supported platform is Red Hat Enterprise Linux Server 6 Update 5 (x86_64) or greater. Preparing to Install VISAGE VISAGE can be installed independently of any previous major or incremental release of ECLIPSE, INTERSECT or VISAGE. It can be installed over existing installations. 1. Users with existing ECLIPSE installations should always ensure that the macros directory is backed up before proceeding with the software installation. 2. If ECLIPSE is already installed, VISAGE must be installed into the same directory as ECLIPSE. Note: It is assumed that the simulator software is installed on a default path /ecl on Linux and C:\ecl on Windows. The steps required to install VISAGE are: 1. Install the VISAGE software. 2. Install a license (if required). 3. Install Intel MPI on Windows, or Configure MPI on Linux. 4. Test the installation of VISAGE works correctly. Introduction 1 VISAGE DVD Organization VISAGE software is distributed on a single DVD. DVD The DVD contains software for Windows and Linux. This includes: • VISAGE installation with documentation. • Utility resources for Windows and Linux. Introduction 2 VISAGE Installing VISAGE on Windows Preparation for the installation • You must have administrator privileges to install the VISAGE software. • Know the identities of your drives, for example C: for the hard drive and D: for the DVD drive. • We recommend you disable your virus checker temporarily during the installation process. • The VISAGE simulation software must be installed in a directory path that contains no spaces in the path name, not for example in C:\Program Files\ecl. • The installation instructions assume C:\ecl is the root directory of the VISAGE simulation software. • Simulation Launcher requires .NET framework 3.5 to function. Windows requires that the user manually activates .NET framework 3.5 through the control panel if users have not already done this for another application. The Microsoft support website contains guidance on activating .NET framework 3.5 for these operating systems. If required you can install Acrobat Reader from http://get.adobe.com.reader/. Note: If you have installed a previous version of VISAGE, you can also install this version. To Install the VISAGE Simulator 1. Insert the DVD in the DVD drive. 2. The Schlumberger installation panel should appear; if not use Windows Explorer to access the DVD and run setup.exe. 3. Click Install Products. 4. Click VISAGE 2016.1 to install the VISAGE simulator. 5. When the installation wizard opens, follow the instructions and click Next on each window to proceed. 6. By default, the VISAGE Simulator is installed into C:\ecl. To change the installation location, in the Choose Destination Location window, click Browse, select your preferred location and click Next. Note: If you already have ECLIPSE installed, you must install the VISAGE Simulator into the same location. 7. Details of your installation choices are shown in the Start Copying Files; click Next to install the VISAGE simulator, and when the installation is complete click Finish. If required, install the Schlumberger License Tool following the instructions in the Schlumberger Licensing User Guide. Installing Intel MPI After installing VISAGE Simulator, it is necessary to install Intel MPI, if parallel simulations are required. 1. From the Schlumberger Installation Panel, select Install Intel MPI. 2. In the Location to Extract Files window, click Extract to use the default location. 3. When the installation wizard opens, follow the instructions and click Next on each window to proceed. 4. In the Installation Summary page, click Install and when installation is complete click