Pointsec Mobile Symbian OS (S60) 3.3.1 Revision and Device Tracking Revised: October 2, 2008 This Revision and Device Tracking document contains information on changes and corrections implemented in previous versions of Pointsec Mobile Symbian OS (S60). It also contains information on devices supported in different releases Note - There may be an updated version of this document and of the other documents you received with your copy of Pointsec Mobile Symbian OS (S60). You can access the latest version at: http://www.checkpoint.com/support/ In This Document Introduction page 2 Product Version Tracking page 2 Version 3.3.0 page 2 Version 3.2.1 page 5 Version 3.2.1 page 5 Version 3.1.4 page 7 Version 3.1.3 page 8 Version 3.1.2 (Limited Release) page 9 Version 3.1.1 page 11 Version 3.1.0 page 12 Version 3.0.1 page 13 Version 3.0.0 page 14 Device Tracking page 15 Documentation Feedback page 15 Copyright © 2008 Pointsec Mobile Technologies AB, a Check Point Software Technologies company. All rights reserved 1 Introduction Introduction This document contains information on previous releases of Pointsec Mobile Symbian OS (S60) in the 3.X series. The information included here is based on the Release Notes for each release. For information on releases in the 2.X series, please see the documentation accompanying that product. As you read this document, please note the following: • The first Pointsec for Symbian OS (S60 3rd Ed.) version recorded in this document is 3.0, because this is the version in which the Symbian OS platform changed from S80 to S60. • As of the 3.1.2 release, the product and documentation were rebranded to Pointsec Mobile Symbian OS (S60) due to the fact that Pointsec Mobile Technologies AB was purchased by Check Point Software Technologies Ltd. See the Pointsec Mobile Symbian OS (S60) Release Notes for details. Versions prior to 3.1.2 are referred to as Pointsec for Symbian OS (S60) in this document. In this document, the abbreviation N/A is used. N/A means Not Applicable. Pointsec Mobile Symbian OS (S60) is also referred to as Pointsec Mobile or Pointsec. This document contains the following chapters: • “Product Version Tracking” on page 2, containing information on the changes and corrections made and the devices supported in each release. • “Device Tracking” on page 15, which lists each device and the release or releases that support it. Product Version Tracking This chapter includes information on changes and corrections made in the previous releases of Pointsec for Symbian OS (S60 3rd Ed.) and Pointsec Mobile Symbian OS (S60) and a list of the devices supported in each release. Version 3.3.0 Changes and Corrections in 3.3.0 New in this release: Temporary Encryption Pointsec Mobile temporarily encrypts new information written to the device during times when you are not authenticated. The information is then decrypted and encrypted normally when you authenticate to Pointsec Mobile, making the information available to all applications as usual. The devices that support temporary encryption are • Nokia E51 • Nokia E90 PR2 Screen Lock If the screen lock function is enabled on the device, Pointsec Mobile blocks most other windows while it is locked, which forces the user to authenticate himself to use most other applications on the device. Pointsec Mobile Symbian OS (S60) Revision and Device Tracking. Last Update — October 2, 2008 2 Version 3.3.0 When screen lock is enabled, the native key lock of the device will be activated after Pointsec Mobile locks to prevent the user from being accidently locked out. Password Policy and Property Settings Password policy and property settings have been added to the installation set settings for Pointsec Mobile. These settings allow the administrator to manage how long passwords can be used and define the strength of the passwords that users use to access their devices. The following are the password policies that administrators can deploy on the device. Table 1 Password Policy Settings Password Policy Explanation Settings Active This setting activates or deactivates the password policy. Min password age (days) The minimum length of time, in days, during which a user must use the same password. Max password age (days) The maximum length of time, in days, during which a user can use the same password. Enforce password history The number of unique new passwords that a user must use before he/she can re-use an old password. The following are the password properties that administrators can deploy on the device. Table 1-1 Password Properties Password Properties Explanation Settings Min password length The minimum length allowed for the password. This setting is included in previous versions of Pointsec Mobile Symbian OS (S60). Its location is new in this release. It has been moved from the Authentication Options section to the Password Properties section. Max identical characters The maximum number of occurrences of any character in the password. Max identical The maximum number of identical consecutive characters in the consecutive characters password. Max number of The maximum number of consecutive characters in an ordered sequence characters in ordered in the password. sequence Min number of special The minimum number of special characters required in the password. characters Min number of letters The minimum number of letters required in the password. Min number of digits The minimum number of digits required in the password. Require upper and lower Passwords can be required to contain both upper and lower case case characters. Allow digit prefix/suffix Passwords can be allowed to start and end with a digit. For more information on the password policy and property settings, see the Pointsec Mobile Symbian OS (S60) Administrator’s Guide. Setting Moved and Renamed The installation set setting Silent Installation Wizard has a new name: Welcome Message. It has been moved from the Device Management Settings section to the Miscellaneous section in the Pointsec Administration Console. Pointsec Mobile Symbian OS (S60) Revision and Device Tracking. Last Update — October 2, 2008 3 Version 3.3.0 Note the change in function for this setting compared to previous versions: Setting the Welcome Message to No minimizes the amount of user interaction that is required in the Pointsec Mobile installation wizard. In previous versions, when the setting was called Silent Installation Wizard, the Yes setting performed this function. Remote Help using SmartCenter for Pointsec - webRH Pointsec Mobile Module You can configure Pointsec Mobile to use SmartCenter webRH, a separate Check Point product, to provide Remote Help to users instead of the standard Remote Help functionality. For information on using SmartCenter webRH, see the SmartCenter for Pointsec - webRH Pointsec Mobile Module Administrator's Guide. Fixed Issues The following issues have been fixed in this release: Table 2 Fixed Issues in 3.3.0 ID Short description Description/Info 397559 Pointsec Mobile display problem The Pointsec Mobile icon did not display in the Fast Select menu after upgrade until user switched the device off and on. This has been fixed in this release. Supported Devices in 3.3.0 The following devices were supported in the 3.3.0 release: Table 3 Supported Devices in 3.3.0 Device Recommended phone software (firmware) version Nokia E50 06.28.3.0 or later Nokia E51 100.34.20 Nokia E60 2.0618.06.05 or later Nokia E61 Nokia E61i 1.0633.22.05 Nokia E62 2.06.18.06.17 or later Nokia E65 1.0633.18.01 Nokia E70 2.0618.07.09 or later Nokia E90 V 210.34.75 Nokia N73 V 2.0628.0.0.1 or later Nokia N80 V 4.0632.0.38 or later Nokia N81 V 10.0.035 Nokia N81 8GB V 11.0.045 Nokia N82 V 11.0.117 Nokia N91 V 2.00.052 or later Nokia N93 V 11.0.034 or later Nokia N93i V 11.0.009 Nokia N95 V 12.0.13 or later Nokia N95 8GB V 15.0.015 Nokia 6110 Navigator V 03.51 Pointsec Mobile Symbian OS (S60) Revision and Device Tracking. Last Update — October 2, 2008 4 Version 3.2.1 Version 3.2.1 Changes and Corrections in 3.2.1 Fixed Issues The following issues have been fixed in this release: Table 4 Fixed Issues in 3.2.1 ID Short description Description/Info 453238 One-step uninstallation with When initiating removal of Pointsec Mobile via MFormation DM did not always work MFormation DM, the device was decrypted and Pointsec Mobile was closed. However, sometimes Pointsec was not uninstalled. This has now been fixed. 452531 Device user interface froze when When Pointsec was unlocked and an antivirus antivirus application was enabled application (running a real time scan) was enabled, the device user interface sometimes froze, requiring the device to be reset. This has been fixed in this release. Supported Devices in 3.2.1 The following devices were supported in the 3.2.1 release: Table 5 Supported Devices in 3.2.1 Device Recommended phone software (firmware) version Nokia E50 06.28.3.0 or later Nokia E51 100.34.20 Nokia E60 2.0618.06.05 or later Nokia E61 Nokia E61i 1.0633.22.05 Nokia E62 2.06.18.06.17 or later Nokia E65 1.0633.18.01 Nokia E70 2.0618.07.09 or later Nokia E90 V 07.22.4.0 Nokia N73 V 2.0628.0.0.1 or later Nokia N80 V 4.0632.0.38 or later Nokia N81 V 10.0.035 Nokia N81 8GB V 11.0.045 Nokia N82 V 11.0.117 Nokia N91 V 2.00.052 or later Nokia N93 V 11.0.034 or later Nokia N93i V 11.0.009 Nokia N95 V 12.0.13 or later Nokia N95 8GB V 15.0.015 Nokia 6110 Navigator V 03.51 Pointsec Mobile Symbian OS (S60) Revision and Device Tracking.