Coordinating Working Party on Fishery Statistics (CWP) Handbook of Fishery Statistical Standards Annex LIII: Length of Fishery Vessels (Approved at the 11th Session of the CWP, 1982) Length overall (o/l): The most frequently used and preferred measure of the length of a fishing vessel is the length overall. This refers to the maximum length of a vessel from the two points on the hull most distant from each other, measured perpendicular to the waterline Other measures of the length of vessels are: Waterline length (w/l) refers to the length of the designed waterline of the vessel from the stern to the stern. This measure is used in determining certain properties of a vessel for example, the water displacement; Length between perpendiculars (p/p) refers to the length of a vessel along the waterline from the forward surface of the stern, or main bow perpendicular member, to the after surface of the sternpost, or main stern perpendicular member. This is believed to give a reasonable idea of the vessel’s carrying capacity, as it excludes the small, often unusable volume contained in her overhanging ends. On some types of vessels this is, for all practical purposes, a waterline measurement. In a vessel with raked stern, naturally this length <change as the draught of the ship changes, therefore it is measured from the defined loaded condition. p/p Length between perpendiculars w/l Waterline length o/a Length overall b Breadth f Freeboard d Draught Coordinating Working Party on Fishery Statistics (CWP) Handbook of Fishery Statistical Standards Vessel size (length overall in Code meters) Lower limit Upper limit 210 0 5.9 221 6 11.9 222 12 17.9 223 18 23.9 224 24 29.9 225 30 35.9 230 36 44.9 240 45 59.9 250 60 74.9 260 75 99.9 270 100 and over Annex LVII: Vessel size (Approved by CWP-11, 1982) .