Hot Work Permit 1

Hot Work Permit 1

<p> DEPARTMENT OF ADMINISTRATION – GENERAL SERVICES DIVISION HOT WORK PERMIT 1 BEFORE INITIATING HOT WORK, ENSURE PRECAUTIONS ARE IN PLACE MAKE SURE AN APPROPRIATE FIRE EXTINGUISHER IS READILY AVAILABLE! This Hot Work Permit is required for any operation involving open flames or producing heat and/or sparks. This includes, but is not limited to: Brazing, Cutting, Grinding, Soldering, Thawing Pipe, Torch-Applied Roofing 2, and Cadwelding.</p><p>INSTRUCTIONS Required Precautions Checklist A. Verify precautions listed at right (or do no □ Available sprinklers, hose streams, and extinguishers proceed with the work). are in service/operable. B. Complete and retain this permit. □ Hot work equipment in good repair.</p><p>Requirements within 35 ft (10m) of work ______□ Flammable liquids, dust, lint, and oil deposits HOT WORK BEING DONE BY removed. □ Explosive atmosphere in area eliminated. □ EMPLOYEE □ Floors swept clean. □ CONTRACTOR ______□ Combustible floors wet down, covered with damp ______sand or fire-resistant sheets. DATE JOB NO. □ Remove other combustibles where possible. Otherwise protect with fire-resist tarpaulins or metal ______shields. LOCATION/BUILDING & FLOOR □ All wall and floor openings covered. ______□ Fire-resistant tarpaulins suspended beneath work. NATURE OF JOB/OBJECT Work on walls or ceilings/enclosed equipment ______□ Construction is noncombustible and without NAME OF PERSON DOING HOT WORK combustible covering or insulation. □ Combustibles on other side of walls moved away. ______□ Danger exists by conduction of heat into another I verify the above location has been examined, the area. precautions checked on the Required Precautions Checklist □ Enclosed equipment cleaned of all combustibles. have been taken to prevent fire, and permission is authorized □ Containers purged of flammable liquids/vapors. for work. ______SIGNED: Fire watch/hot work area monitoring □ Fire watch will e provided during and for 30 minutes after work, including any coffee or lunch breaks. ______□ Fire watch is supplied with suitable extinguishers. Permit DATE Time □ Fire watch is trained in use of this equipment and in Expires: AM sounding alarm. ______PM □ Fire watch may be required for adjoining areas, above, and below. NOTE EMERGENCY NOTIFICATION ON BACK OF FORM. □ Monitor hot work area for 30 minutes after job is USE AS APPROPRIATE FOR YOUR FACILITY. completed.</p><p>THIS PERMIT IS GOOD FOR Other Precautions Taken ONE DAY ONLY! □ Confined space entry permit required. □ Is area protected with smoke or heat detection. NOTE: 1. When used in accordance with NFPA 51B, this permit is to □ Ample ventilation to remove smoke/vapor from work be used for, but not limited to, the following: welding, area. cutting, grinding, open-flame soldering, and thawing pipe. □ Lockout/tagout required 2. Torch applied roofing is exempt from NFPA 51B per 1-2.3.</p><p>FORMS: \HOT WORK PERMIT – 1/14/13</p>

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    1 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us