<p> KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio </p><p>P21 Ironmongery P21 </p><p>To be read with Preliminaries/ General conditions and Z99 Good practice in the selection of materials. </p><p>GENERALLY </p><p>170 IRONMONGERY FOR FIRE DOORS - Relevant products: Ironmongery fixed to, or morticed into, the component parts of a fire resisting door assembly. - Compliance: Ironmongery included in successful tests to BS 476-22 or BS EN 1634-1 on door assemblies similar to those proposed. - Certification: Submit CERTIFIRE Certificates or Testing evidence from UKAS accredited laboratory. - Melting point of components (except decorative non functional parts): 800°C Min.</p><p>180 CATEGORY OF DUTY FOR DOOR IRONMONGERY - Standard: To DD 171. - Category of duty of doors: Heavy Duty. - General: Durability of ironmongery components to be compatible with stated category of duty of each door leaf. - Exclusions: Ironmongery with specific duty or ‘category of use’ defined elsewhere. - Documentation: Before placing orders with suppliers submit documentation Showing product compliance with stated category of duty. </p><p>Page 1 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>DOOR HANGING DEVICES </p><p>315 PERFORMANCE SPECIFICATION FOR SINGLE AXIS DOOR HINGES - Standard: To BS EN 1935. - Hinges to doors on escape routes and fire/ smoke control doors: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 7. - Test door mass: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Security - Burglar resistance: 1. - Hinge grade: 12. - Type: Washered butt. - Size: Contractors choice to suit door mass. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Other requirements: Radiused corners.</p><p>DOOR HANGING DEVICES </p><p>360 PERFORMANCE SPECIFICATION FOR DOOR TRACK AND RUNNING GEAR TO SLIDING DOORS - Standard: To BS EN 1527. - Minimum classification grades: - Category of use: - (no classification). - Durability: 5. - Door mass: 3. - Fire resistance: 1. - Safety: - (no classification). - Corrosion resistance: 3. - Security: - (no classification). - Category of door: Sliding door. - Initial friction: 50Kn. - Opening dimensions: 900 x 2500mm nominal. - Accessories: None. - Operation: Smooth and quiet. - Safety: Doors not able to come off track when in use. </p><p>Page 2 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>DOOR OPERATING DEVICES </p><p>412 PERFORMANCE SPECIFICATION FOR OVERHEAD DOOR CLOSERS - Standard: To BS EN 1154. - Door closing devices to fire/ smoke control doors: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 8. - Door closer power size: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Type: Face fixing. - Other functions: overload, back check & delayed closing. - Casing finish: Grade 1.4401 (316) Satin stainless Steel. - Operational adjustment: - Variable power: Matched to the sizes and weights of doors. - Latched doors: Override latches and/ or door seals when fitted. - Unlatched doors: Hold shut under normal working conditions. - Closing against smoke seals of fire doors: Positive. No gaps.</p><p>DOOR OPERATING DEVICES </p><p>413 PERFORMANCE SPECIFICATION FOR OVERHEAD DOOR CLOSERS - Standard: To BS EN 1154. - Door closing devices to fire/ smoke control doors: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 8. - Door closer power size: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Type: Concealed. - Other functions: overload, back check & delayed closing. - Casing finish: Grade 1.4401 (316) Satin stainless Steel. - Operational adjustment: - Variable power: Matched to the sizes and weights of doors. - Latched doors: Override latches and/ or door seals when fitted. - Unlatched doors: Hold shut under normal working conditions. - Closing against smoke seals of fire doors: Positive. No gaps. </p><p>Page 3 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>452 PERFORMANCE SPECIFICATION FOR FLOOR SPRINGS - Standard: To BS EN 1154. - Door closing devices to fire/ smoke control doors: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 8. - Door closer power size: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Other functions: overload, back check & delayed closing. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel.. - Operational adjustment: - Variable power: Matched to size, weight and location of doors. - Latched doors: Override latches and/ or door seals when fitted. - Unlatched doors: Hold shut under normal working conditions.</p><p>DOOR OPERATING DEVICES </p><p>472 PERFORMANCE SPECIFICATION FOR ELECTROMAGNETIC HOLD OPEN/ SWING-FREE DEVICES (24 V) - Standard: To BS EN 1155. - Electromagnetic devices to fire/ smoke control doors: CE marked. - Type: Swing free integral with closer. - Minimum classification grades: - Category of use: 3. - Durability: 8. - Hold open power size: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Means of release: Alarm system and/ or failure of power supply. - Test switch: Located in a convenient position adjacent to door. - Operational adjustment of integral closer: - Variable power: Matched to size, weight and location of doors. - Latched doors: Override latches and/ or door seals when fitted. - Unlatched doors: Hold shut under normal working conditions. </p><p>Page 4 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>482 PERFORMANCE SPECIFICATION FOR DOOR CO-ORDINATORS TO REBATED DOUBLE DOORS - Standard: To BS EN 1158. - Door co-ordinators to fire/ smoke control doors: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 8. - Door co-ordinator size: 7. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Application: To all single swing double doors with rebated meeting stiles and fitted with self closers. - Selection criteria: Provide types that: - Require the minimum amount of material to be removed from the door And frame. - Are suitable for the size of rebates.</p><p>DOOR SECURING DEVICES </p><p>515 DOOR LOCKS GENERALLY - Standard: To BS 5872. - Category: B. - Manufacturer: To Clause 122. - Product reference: Contractors Choice. - Type: Cylinder mortice lock. - Backset: as schedule. - Material/ finish: Stainless steel. - Keying: grand master suited. </p><p>Page 5 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>566 PERFORMANCE SPECIFICATION FOR PADLOCKS GENERALLY - Standard: To BS EN 12320. - Minimum classification grades: - Category of use: - (no classification). - Test cycles/ durability: - (no classification). - Door mass: - (no classification). - Fire resistance: - (no classification). - Safety: - (no classification). - Corrosion resistance: 2. - Security; 5. - Size: As schedule. - Case: Satin chromed. - Shackle: Hardened steel. - Accessories: As schedule. - Keying: Grand master suited. </p><p>572 PERFORMANCE SPECIFICATION FOR EMERGENCY EXIT DEVICES - Standard: To BS EN 179. - Emergency exit devices for locked doors on escape routes: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 7. - Door mass: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Security: 4. - Projection of operating element: 2. - Type of operation: Lever handle operation. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Additional requirements: Locking provision to be grand master suited, security alarmed.</p><p>Page 6 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>DOOR SECURING DEVICES </p><p>578 PERFORMANCE SPECIFICATION FOR PANIC EXIT DEVICES - Standard: To BS EN 1125. - Panic exit devices for locked doors on escape routes: CE marked. - Minimum classification grades: - Category of use: 3. - Durability: 7. - Door mass: 5. - Suitability for use on fire/ smoke doors: 1. - Safety: 1. - Corrosion resistance: 3. - Security: 2. - Projection of bar: 2. - Type of bar operation: Touch bar. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Additional requirements: External locking to be grand master suited. Security alarmed. </p><p>584 PERFORMANCE SPECIFICATION FOR DOOR BOLTS - Standard: To BS EN 12051. - Minimum classification grades: - Category of use: 3. - Number of test cycles: 4. - Door mass: - (no classification). - Fire safety: 1. - Safety in use: 1. - Corrosion resistance: 3. - Security: 4. - Type: slide action flush bolt. - Size: 200mm. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Additional requirements: Dirt excluding sockets. </p><p>586 PRIVACY INDICATOR BOLTS - Manufacturer: To clause 122. - Product reference: Contractor choice. - Type: Slide action bolt. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Emergency release facility: Required.</p><p>Page 7 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21 </p><p>DOOR FURNITURE </p><p>622 PERFORMANCE SPECIFICATION FOR LEVER HANDLE SETS - Standard: To BS EN 1906. - Minimum classification grades: - Category of use: 3. - Durability: 7. - Door mass: - (no classification). - Fire resistance: 1. - Safety: 1. - Corrosion resistance: 3. - Security: 3. - Type of operation: B. - Style: Round pattern with return to door. - Size: 22mm dia. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Mounting: as schedule. - Additional requirements: None. </p><p>625 PERFORMANCE SPECIFICATION FOR KNOBSETS - Standard: To BS EN 1906. - Minimum classification grades: - Category of use: 3. - Durability: 7. - Door mass: - (no classification). - Fire resistance: 1. - Safety: 1. - Corrosion resistance: 3. - Security: 3. - Type of operation: spring assisted. - Style: Cylinder pattern with thumbgrip. - Size: 50mm nominal diameter. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Mounting: As schedule. - Additional requirements: none.</p><p>Page 8 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21</p><p>DOOR FURNITURE </p><p>641 PULL HANDLES - Manufacturer: As Clause 122. - Product reference: Contactor selection subject to design approval - Diameter; As schedule. - Distance between centres: As schedule. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Mounting: Bolt through. - Additional requirements: None. </p><p>670 PUSH PLATES. - Manufacturer: To Clause 122. - Product reference: Contractor Selection subject to Design submission. - Size: As schedule. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Mounting: countersunk sunk screws with matching caps. - Additional requirements: profiled edges, rounded corners, acid etched detailing. </p><p>680 MIDRAIL PLATES. - Manufacturer: To Clause 122. - Product reference: Contractor Selection subject to Design submission. - Size: As schedule. - Material/ finish: Grade 1.4401 (316) Satin stainless Steel. - Mounting: countersunk sunk screws with matching caps. - Additional requirements: profiled edges, rounded corners, acid etched detailing. </p><p>690 KICK PLATES. - Manufacturer: To Clause 122. - Product reference: Contractor Selection subject to Design submission. - Size: As schedule.. - Material/ finish: Grade 1.4401 (316) Satin Stainless Steel. - Mounting: countersunk sunk screws with matching caps. - Additional requirements: profiled edges, rounded corners, acid etched detailing. </p><p>710 ESCUTCHEONS - Manufacturer: To Clause 122. - Product reference: Contractor Selection subject to Design submission. - Material/ finish: Grade 1.4401 (316) Satin Stainless Steel. - Keyhole type: Euro profile cylinder - Usage: to cylinder locks where no backplate is specified.</p><p>Page 9 | 10 Architectural Specification – P21 Ironmongery KUALA LUMPUR</p><p>Tel : +6 03 4149 1404 Fax : +6 03 4149 1408 Email : [email protected] </p><p>Company. no. : 779985-X HARD FINISHES PREAMBLES</p><p>International Design Studio P21 Ironmongery P21</p><p>720 DOOR STOPS - Manufacturer: To Clause 122. - Product reference: Contractor Selection subject to Design submission. - Type: Floor mounted rubber buffer on stainless steel show for concrete fixing. - Usage: As schedule.</p><p>DOOR FURNITURE </p><p>720 COMBINED COAT HOOKS/DOOR STOP - Manufacturer: Franz Schneider Brakel GmbH & Co, Niehemer Strasse 38, Germany 33034 Brakel, Tel No: 49 5272 6080, Fax No 49 5272 608300, E-mail: [email protected] or equivalent. - Product reference: FSB item 3895 - Material / Finish: Satin stainless steel. </p><p>770 PADLOCK HASP AND STAPLE - Manufacturer: To Clause 122. - Product reference: Contractor Selection subject to Design submission. - Type: Security - Size: As schedule. - Material/ finish: Satin chrome. </p><p>895 DOOR MOUNTED AIR TRANSFER GRILLES - Manufacturer: clause 122. - Product reference: Contractor Selection subject to Design submission. - Type: Composite slot fitting. - Size: As schedule. - Material/ finish: Grade 1.4401 (316) Satin Stainless Steel. </p><p>END OF SECTION P21</p><p>Page 10 | 10 Architectural Specification – P21 Ironmongery</p>