<p>NZQA registered unit standard 21803 version 2 Page 1 of 3</p><p>Title Demonstrate knowledge of terms and transport types used in the international freight forwarding industry</p><p>Level 3 Credits 4</p><p>Purpose People credited with this unit standard are able to:  explain terms and abbreviations used in international freight forwarding;  explain types of transport services used in the international freight forwarding industry.</p><p>Classification Logistics > Freight Forwarding</p><p>Available grade Achieved</p><p>Explanatory notes</p><p>1 Legal and formal requirements to be complied with include: International Air Transport Association (IATA) Regulations; International Federation of Freight Forwarders (FIATA) Policies.</p><p>2 For the purposes of assessment against this unit standard, any new, amended, or replacement legislation, regulations, Rules, standards, and codes of practice affecting the outcome of this unit standard will take precedence, pending review of this unit standard.</p><p>Outcomes and evidence requirements</p><p>Outcome 1</p><p>Explain generic terms and abbreviations used in international freight forwarding.</p><p>Evidence requirements</p><p>1.1 Explain terms and abbreviations used in international freight forwarding.</p><p>Range includes but is not limited to – draw back, customs entry, carnet, handling requirements, rate of exchange, packing declaration, BACC, CDO, DO, LFD, LC, BL, HAWB, MAWB, QD.</p><p>1.2 Explain terms and abbreviations used in sea freight operations.</p><p>Range includes but is not limited to – transhipment, voyage, detention, demurrage, de-hire, VSA, FCL, TEU, FEU, BAF, CAF, CY, CFS, DTHC, OTHC. NZ Motor Industry Training Organisation Ó New Zealand Qualifications Authority 2018 (Incorporated) SSB Code 101542 NZQA registered unit standard 21803 version 2 Page 2 of 3</p><p>1.3 Explain terms and abbreviations used in air freight operations.</p><p>Range includes but is not limited to – check in, loose freight, flight, code share, storage costs, free time, CAO, TACT, IATA, RACA, CAA, ULD, OAG, PAX.</p><p>1.4 Explain terms and abbreviations used in road freight operations</p><p>Range includes but is not limited to – curtain sider, flatbed, Scalatal, low loader, semi-trailer, B train, swing lift, tail lift, Hiab, gross laden weight, tare weight, OOG, divisible load, temp control, RUC, FTL, LTL, FAF.</p><p>1.5 Explain terms and abbreviations used in container operations</p><p>Range includes but is not limited to – 20’, 40’, HC, OT, RE, F/Rack, NOR, RORO, GP, FAK.</p><p>Outcome 2</p><p>Explain types of transport services used in the international freight forwarding industry.</p><p>Evidence requirements</p><p>2.1 Identify types of ships and describe their limitations for carrying different types of freight.</p><p>Range ship types may include but are not limited to – RORO, barge, container, bulk carrier, tanker, passenger, refrigerated; evidence of five is required</p><p>2.2 Describe the limitations for carrying different types of freight on aircrafts.</p><p>Range aircrafts include – freighter, wide body, narrow body; evidence of two limitations for each type of aircraft is required. </p><p>2.3 Explain the advantages and disadvantages of using a specific mode for any given consignment.</p><p>Range modes include – air, sea, coastal, road, rail; evidence of two advantages and two disadvantages for each mode is required. </p><p>Planned review date December 2016</p><p>NZ Motor Industry Training Organisation Ó New Zealand Qualifications Authority 2018 (Incorporated) SSB Code 101542 NZQA registered unit standard 21803 version 2 Page 3 of 3</p><p>Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 26 July 2005 N/A Review 2 17 June 2011 N/A</p><p>Consent and Moderation Requirements (CMR) reference 0092 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.</p><p>Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.</p><p>Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.</p><p>Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.</p><p>Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.</p><p>Comments on this unit standard</p><p>Please contact the NZ Motor Industry Training Organisation (Incorporated) [email protected] if you wish to suggest changes to the content of this unit standard.</p><p>NZ Motor Industry Training Organisation Ó New Zealand Qualifications Authority 2018 (Incorporated) SSB Code 101542</p>