<p> ISO Update S u p p l e m e n t t o I S O fo c u s O c t o b e r 2 0 1 4 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 September to 30 September 2014 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 8 Ships and marine technology ISO/CD 18139 Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements ISO/CD 18154 Ships and marine technology — Pilot operated safety valves for low temperature applications — Design requirements TC 20 Aircraft and space vehicles ISO/CD 17851 Space environment (natural and artificial) — Space environment simulation at material tests — General principles and criteria ISO/DTR 18146 Space systems — Design and operation manual for spacecraft operated in the debris environment TC 22 Road vehicles ISO/CD 17536-4 Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laboratory fractional test method ISO/CD 17536-5 Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 5: Engine fractional efficiency test method ISO/CD 8820-4 Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures ISO/CD 16845-1 Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link layer and physical signaling TC 23 Tractors and machinery for agriculture and forestry ISO 11450:1999/CD Equipment for harvesting and conservation — Round balers — Terminology and commercial Amd 1 specifications — Amendment 1 TC 29 Small tools ISO 21538:2004/CD Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building Amd 1 construction and civil engineering — Amendment 1 ISO/CD 22917 Superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride TC 34 Food products ISO 27608:2010/CD Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic Amd 1 method — Amendment 1 ISO 5495:2005/CD Sensory analysis — Methodology — Paired comparison test — Amendment 1 Amd 1 ISO/CD TS 16393 Molecular biomarker analysis — Qualitative methods — Validation scheme for binary analytical methods for food and food products TC 43 Acoustics ISO 389-7:2005/CD Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference Amd 1 threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1 TC 45 Rubber and rubber products ISO/CD 247 Rubber — Determination of ash</p><p>TC 58 Gas cylinders ISO/CD 24431 Gas cylinders — Cylinders for compressed and liquefied gases (excluding acetylene) — Inspection at time of filling TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/CD 19903 Petroleum and natural gas industries — Fixed concrete offshore structures</p><p>TC 72 Textile machinery and accessories ISO/CD 96-1 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellers TC 107 Metallic and other inorganic coatings ISO/CD 14916 Thermal spraying — Determination of tensile adhesive strength</p><p>ISO/CD 14917 Thermal spraying — Terminology, classification</p><p>TC 126 Tobacco and tobacco products ISO/DTR 19478-2 ISO and Health Canada intense smoking parameters — Part 2: Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes TC 146 Air quality ISO/CD 28902-2 Air quality — Environmental meteorology — Part 2: Ground-based remote sensing by Doppler wind lidar TC 155 Nickel and nickel alloys ISO/CD 8049 Ferronickel shot — Sampling for analysis</p><p>TC 159 Ergonomics ISO/CD 9241-960 Ergonomics of human-system interaction — Part 960: Framework and guidance for gesture interactions TC 163 Thermal performance and energy use in the built environment ISO/CD 17772 Energy performance of buildings - Indoor environmental input parameters</p><p>TC 171 Document management applications ISO/DTR 18159 Document management — Environmental and work place safety regulations affecting microfilm processors TC 172 Optics and photonics ISO/CD 9022-9 Optics and optical instruments — Environmental test methods — Part 9: Solar radiation</p><p>TC 184 Automation systems and integration IEC/CD 62264-3 Enterprise-control system integration — Part 3: Activity models of manufacturing operations management IEC/CD 62264-5 Enterprise-control system integration — Part 5:</p><p>TC 190 Soil quality ISO/CD 18504 Soil quality — Guidance on sustainable remediation</p><p>TC 192 Gas turbines ISO/CD 18888 Combined Cycle Power Plants</p><p>TC 197 Hydrogen technologies ISO/CD 19884 Gaseous hydrogen - Cylinders and tubes for stationary storage</p><p>TC 201 Surface chemical analysis ISO/CD TR 13096 Surface chemical analysis — Scanning-probe microscopy — Guidelines for the description of AFM probe properties TC 211 Geographic information/Geomatics ISO/DTS 19157-2 Geographic information — Data quality — Part 2: XML Schema Implementation</p><p>TC 238 Solid biofuels ISO/CD 17225-8 Solid biofuels — Fuel specifications and classes — Part 8: Thermally treated and densified biomass fuels JTC 1 Information technology ISO/IEC 19788- Information technology — Learning, education and training — Metadata for learning resources 3:2011/PDAM 1 — Part 3: Basic application profile — Amendment 1 ISO/IEC CD 19788-7 Information technology — Learning, education and training — Metadata for learning resources — Part 7: Bindings ISO/IEC CD 19788- Information technology — Learning, education and training — Metadata for learning resources 10 — Part 10: Application Profile for Access, Distribution and Intellectual Property (WIPO compliant) elements ISO/IEC CD 19788- Information technology — Learning, education and training — Metadata for learning resources 11 — Part 11: Migration from LOM to MLR ISO/IEC CD 20016-2 Information technology for learning, education and training — Human interface equivalencies — Part 2: Template for Specifying Levels of Semantic Unambiguity ISO/IEC CD 24751-2 Information technology — Individualized adaptability and accessibility in e-learning, education and training — Access for all — Part 2: Registry ISO/IEC CD 24751-3 Information technology — Individualized adaptability and accessibility in e-learning, education and training — Access for all — Part 3: Application profile ISO/IEC CD 36002 Information technology — Quality for learning, education and training</p><p>ISO/IEC CD 2382-37 Information technology — Vocabulary — Part 37: Biometrics</p><p>ISO/IEC PDTR 30110 Biometrics and children DIS circulated Period from 01 September to 30 September 2014 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only Vote terminates TC 5 Ferrous metal pipes and metallic fittings ISO/DIS 16631 * Ductile iron pipes, fittings, accessories and 2014-12-04 their joints compatible with plastic (PVC and PE) piping systems for water applications TC 6 Paper, board and pulps ISO/DIS 11475 * Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor 2014-12-24 daylight) (Revision of ISO 11475:2004)</p><p>TC 8 Ships and marine technology ISO/DIS 17905 * Ships and marine technology - Installation, inspection and maintenance of 2014-12-18 container securing devices for ships TC 17 Steel ISO/DIS 17745 * Steel wire ring mesh panels — Definitions and specifications</p><p>ISO/DIS 17746 * Steel wire rope net panels and rolls — Definitions and specifications</p><p>TC 20 Aircraft and space vehicles ISO/DIS 4118.2 * Air cargo — Non-certified lower deck containers — Design and testing 2014-11-19 (Revision of ISO 4118:2005)</p><p>ISO/DIS 18423 * Space data and information transfer systems — Pseudo-Noise (PN) Ranging Systems (Revision of ISO 18423:2013)</p><p>ISO/DIS 20104 * Space data and information transfer systems — Producer-Archive Interface Specification (PAIS) ISO/DIS 21459 * Space data and information transfer systems — Proximity-1 space link protocol — Coding and synchronization sublayer (Revision of ISO 21459:2006)</p><p>ISO/DIS 21460 * Space data and information transfer systems — Proximity-1 space link protocol — Physical layer (Revision of ISO 21460:2007)</p><p>ISO/DIS 22663 * Space data and information transfer systems — Proximity-1 space link protocol — Data link layer (Revision of ISO 22663:2007)</p><p>TC 21 Equipment for fire protection and fire fighting ISO/DIS 7240-29 * Fire detection and alarm systems — Part 29: Video fire detectors 2014-12-26 TC 22 Road vehicles ISO/DIS 22900-2 * Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: 2014-12-12 Diagnostic protocol data unit (D-PDU API) (Revision of ISO 22900-2:2009)</p><p>IEC/DIS 62752.2 In-Cable Control and Protection Device for mode 2 charging of electric road 2014-12-06 vehicles (IC-CPD) ISO/DIS 18246 * Electrically propelled mopeds and motorcycles — Safety requirements for 2014-12-25 conductive connection to an external electric power supply TC 23 Tractors and machinery for agriculture and forestry ISO/DIS 7216 * Agricultural and forestry tractors — Measurement of noise emitted when in motion (Revision of ISO 7216:1992)</p><p>TC 31 Tyres, rims and valves ISO/DIS 17464 * Pneumatic Tubes for Automotive Vehicles — Technical Requirements and Test Methods TC 34 Food products ISO/DIS 7304-1 * Durum wheat semolina and alimentary pasta — Assessment of cooking 2014-12-17 quality of alimentary pasta by sensory analysis — Part 1: Reference method (Revision of ISO 7304:1985)</p><p>ISO/DIS 19344 * Fermented milk products — Quantification of lactic acid bacteria — Flow 2014-12-17 cytometry method ISO 5492:2008/DAmd * Sensory analysis — Vocabulary — Amendment 1 2015-02-19 1 ISO * Sensory analysis — Methodology — Magnitude estimation method — 2014-12-30 11056:1999/DAmd 2 Amendment 2 ISO/DIS 13299 * Sensory analysis — Methodology — General guidance for establishing a 2015-02-12 sensory profile (Revision of ISO 13299:2003)</p><p>TC 35 Paints and varnishes ISO/DIS 1514 * Paints and varnishes — Standard panels for testing 2015-02-26 (Revision of ISO 1514:2004)</p><p>ISO/DIS 11997-1 * Paints and varnishes — Determination of resistance to cyclic corrosion 2015-02-26 conditions — Part 1: Wet (salt fog)/dry/humidity (Revision of ISO 11997-1:2005)</p><p>ISO/DIS 8503-5 * Preparation of steel substrates before application of paints and related 2015-02-19 products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile (Revision of ISO 8503-5:2003)</p><p>TC 38 Textiles ISO/DIS 17881-1 * Textiles — Determination of certain flame retardants — Part 1: Brominated 2015-02-05 flame retardants ISO/DIS 17881-2 * Textiles — Determination of certain flame retardants — Part 2: Phosphorus 2015-02-05 flame retardants ISO/DIS 18782 * Textiles — Determination of dynamic hygroscopic heat generation 2014-12-25 ISO/DIS 105-G04 * Textiles — Tests for colour fastness — Part G04: Colour fastness to Nitric 2014-12-25 Oxide in the atmosphere at high humidities (Revision of ISO 105-G04:1989)</p><p>TC 39 Machine tools ISO/DIS 16092-1 * Machine tools safety — Presses — Part 1: General safety requirements 2015-02-12 TC 45 Rubber and rubber products ISO/DIS 34-1 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2014-12-11 1: Trouser, angle and crescent test pieces (Revision of ISO 34-1:2010)</p><p>ISO/DIS 34-2 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2014-12-11 2: Small (Delft) test pieces (Revision of ISO 34-2:2011)</p><p>ISO/DIS 6133 * Rubber and plastics — Analysis of multi-peak traces obtained in 2014-12-04 determinations of tear strength and adhesion strength (Revision of ISO 6133:1998)</p><p>ISO/DIS 18852 * Rubber compounding ingredients — Determination of multipoint nitrogen 2014-12-04 surface area (NSA) and statistical thickness surface area (STSA) (Revision of ISO 18852:2012)</p><p>TC 59 Buildings and civil engineering works ISO/DIS 11528 * Buildings and civil engineering works — Sealants - Determination of crazing 2014-12-30 and cracking following exposure to artificial or natural weathering ISO/DIS 15686-5 * Buildings and constructed assets — Service-life planning — Part 5: Life-cycle 2014-12-11 costing (Revision of ISO 15686-5:2008)</p><p>TC 61 Plastics ISO/DIS 19069-2 * Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: 2015-02-12 Preparation of test specimens and determination of properties (Revision of ISO 1873-2:2007)</p><p>TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/DIS 17349 * Petroleum and natural gas industries — Guidelines for offshore platforms 2015-02-19 handling streams with high content of CO2 at high pressures ISO/DIS 17782 * Petroleum, petrochemical and natural gas industries — Qualification of 2015-02-05 manufacturers of special materials TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO/DIS 1135-3 * Transfusion equipment for medical use — Part 3: Blood-taking sets for single 2015-02-26 use (Revision of ISO 1135-3:1986)</p><p>ISO/DIS 8362-5 * Injection containers and accessories — Part 5: Freeze drying closures for 2015-02-05 injection vials (Revision of ISO 8362-5:2008)</p><p>TC 83 Sports and other recreational facilities and equipment ISO/DIS 10958-2 * Snowboards — Binding mounting area — Part 2: Requirements and test 2014-12-30 methods for snowboards with inserts (Revision of ISO 10958-2:2004)</p><p>TC 84 Devices for administration of medicinal products and catheters ISO/DIS 8537 * Sterile single-use syringes, with or without needle, for insulin 2015-02-12 (Revision of ISO 8537:2007) TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/DIS 11665-11 * Measurement of radioactivity in the environment — Air: radon-222 — Part 11: 2014-12-04 Test method for soil gas with sampling at depth TC 87 Cork ISO/DIS 4708 * Composition cork — Gasket material — Test methods 2014-11-26 (Revision of ISO 4708:2000)</p><p>TC 92 Fire safety ISO/DIS 16733-1 * Fire safety engineering — Selection of design fire scenarios and design fires 2014-12-30 — Part 1: Selection of design fire scenarios (Revision of ISO/TS 16733:2006)</p><p>TC 94 Personal safety -- Protective clothing and equipment ISO/DIS 13506-1 * Protective clothing against heat and flame — Part 1: Test method for complete 2014-12-05 garments — Measurement of transferred energy using an instrumented manikin TC 96 Cranes ISO 10245- * Cranes — Limiting and indicating devices — Part 2: Mobile cranes — 2014-12-26 2:2014/DAmd 1 Amendment 1 ISO * Cranes — Safety requirements for loader cranes — Amendment 1 2014-12-30 15442:2012/DAmd 1 TC 106 Dentistry ISO/DIS 18397 * Dentistry — Powered scaler 2015-02-19 (Revision of ISO 15606:1999, ISO 22374:2005)</p><p>TC 108 Mechanical vibration, shock and condition monitoring ISO/DIS 13373-3 * Condition monitoring and diagnostics of machines — Vibration condition 2014-12-26 monitoring — Part 3: Guidelines for vibration diagnosis ISO/DIS 13381-1 * Condition monitoring and diagnostics of machines — Prognostics — Part 1: 2014-12-11 General guidelines (Revision of ISO 13381-1:2004)</p><p>TC 110 Industrial trucks ISO/DIS 10896-5 * Rough-terrain trucks — Safety requirements and verification — Part 5: 2014-12-04 Interface between rough-terrrain truck and integrated personnel work platform ISO/DIS 18479-1 * Rough-terrain trucks — Non-integrated personnel work platforms — Part 1: 2014-12-04 Design, safety requirements and verification TC 114 Horology ISO/DIS 3160-2 * Watch-cases and accessories — Gold alloy coverings — Part 2: 2014-12-16 Determination of fineness, thickness, corrosion resistance and adhesion (Revision of ISO 3160-2:2003)</p><p>TC 123 Plain bearings ISO/DIS 19259 * Plain bearings — Bearings with embedded solid lubricant 2014-12-04 TC 127 Earth-moving machinery ISO * Earth-moving machinery — Product identification numbering system — 10261:2002/DAmd 1 Amendment 1 TC 131 Fluid power systems ISO/DIS 15171-2 * Connections for fluid power and general use — Hydraulic couplings for 2014-12-23 diagnostic purposes — Part 2: Coupling for connection under pressure (Revision of ISO 15171-2:2000)</p><p>ISO/DIS 18869 * Hydraulic fluid power — Test methods for couplings actuated with or without 2014-12-23 tools TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings ISO/DIS 18825-1 * Clothing — Digital fittings — Part 1: Vocabulary and terminology used for the 2014-12-18 virtual human body TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/DIS 17885.2 * Plastics piping systems — Mechanical fittings for pressure piping systems — 2014-11-16 Specifications (Revision of ISO 10838-1:2000, ISO 10838-2:2000, ISO 14236:2000, ISO 10838-3:2001) TC 142 Cleaning equipment for air and other gases ISO/DIS 16890-2 * Air filters for general ventilation — Part 2: Measurement of fractional efficiency 2015-02-26 and air flow resistance TC 147 Water quality ISO/DIS 13167 * Water quality — Plutonium, americium, curium and neptunium — Test method 2014-12-09 using alpha spectrometry TC 156 Corrosion of metals and alloys ISO/DIS 15257 * Cathodic protection — Competence levels of cathodic protection persons — 2015-02-26 Basis for certification scheme TC 161 Control and protective devices for gas and/or oil burners and appliances ISO/DIS 23551-9 * Safety and control devices for gas 2014-12-26 burners and gas-burning appliances -- Particular requirements — Part 9: Mechanical gas thermostats TC 184 Automation systems and integration IEC/DIS 62264-4 Enterprise-control System Integration — Part 4: Objects and attributes for 2014-12-13 manufacturing operations management integration TC 190 Soil quality ISO/DIS 22155 * Soil quality — Gas chromatographic determination of volatile aromatic and 2015-02-19 halogenated hydrocarbons and selected ethers — Static headspace method (Revision of ISO 22155:2011)</p><p>ISO/DIS 18763 * Soil quality — Determination of the toxic effects of pollutants on germination 2014-12-18 and early growth of higher plants TC 204 Intelligent transport systems ISO/DIS 14817-1 * Intelligent transport systems — ITS central data registry — Part 1: 2014-12-18 Requirements for an ITS central data registry (Revision of ISO 14817:2002)</p><p>ISO/DIS 14817-2 * Intelligent transport systems — ITS central data registry — Part 2: 2014-12-18 Governance of the Central ITS Data Concept Registry (Revision of ISO 14817:2002)</p><p>ISO/DIS 17438-1 * Intelligent transport systems — Indoor navigation for personal and vehicle ITS station — Part 1: General information and use cases definition TC 209 Cleanrooms and associated controlled environments ISO/DIS 14644-1.2 * Cleanrooms and associated controlled environments — Part 1: Classification 2014-11-19 of air cleanliness by particle concentration (Revision of ISO 14644-1:1999)</p><p>ISO/DIS 14644-2.2 * Cleanrooms and associated controlled environments — Part 2: Monitoring to 2014-11-19 provide evidence of cleanroom performance related to air cleanliness by particle concentration (Revision of ISO 14644-2:2000)</p><p>TC 210 Quality management and corresponding general aspects for medical devices ISO/DIS 18250-3 * Connectors for reservoir delivery systems for healthcare applications — Part 2014-12-26 3: Enteral applications ISO/DIS 80369-3.2 * Small-bore connectors for liquids and gases in healthcare applications — Part 2014-11-26 3: Connectors for enteral applications ISO/DIS 80369-6 * Small bore connectors for liquids and gases in healthcare applications — Part 2015-02-05 6: Connectors for neuraxial applications (Revision of ISO 594-1:1986, ISO 594-2:1998)</p><p>TC 211 Geographic information/Geomatics ISO/DIS 19160-1 * Addressing — Part 1: Conceptual model 2014-12-03 TC 215 Health informatics ISO/DIS 17090-2.2 * Health informatics — Public key infrastructure — Part 2: Certificate profile 2014-11-19 (Revision of ISO 17090-2:2008)</p><p>ISO/DIS 17523 * Health informatics — Requirements for electronic prescriptions 2015-02-12 ISO/DIS 17583 * Health informatics — Terminology constraints for coded data elements 2014-12-19 expressed in ISO Harmonized Data Types used in healthcare information interchange ISO/DIS 21549-5 * Health informatics — Patient healthcard data — Part 5: Identification data 2015-02-26 (Revision of ISO 21549-5:2008)</p><p>ISO/DIS 27799 * Health informatics — Information security management in health using 2015-02-12 ISO/IEC 27002 (Revision of ISO 27799:2008)</p><p>TC 228 Tourism and related services ISO/DIS 13810 * Tourism services — Industrial tourism — Service provision 2014-12-24 TMBG Technical Management Board - groups ISO/IEC DGuide 17 * Guide for writing standards taking into account the needs of micro, small and 2015-01-17 medium-sized enterprises JTC 1 Information technology ISO/IEC DIS 29110-2 * Systems and software Engineering — Lifecycle Profiles for Very Small Entities 2014-12-25 (VSEs) — Part 2: Framework (Revision of ISO/IEC 29110-2:2011)</p><p>ISO/IEC DIS 10118-1 * Information technology — Security techniques — Hash-functions — Part 1: 2014-12-11 General (Revision of ISO/IEC 10118-1:2000)</p><p>ISO/IEC 29192- * Information technology — Security techniques — Lightweight cryptography — 2014-12-11 4:2013/DAmd 1 Part 4: Mechanisms using asymmetric techniques — Amendment 1 ISO/IEC 15938- * Information technology — Multimedia content description interface — Part 5: 2014-12-18 5:2003/DAmd 5 Multimedia description schemes — Amendment 5: Multiple text encodings, extended classification metadata ISO/IEC 23000- * Information technology - Multimedia application format (MPEG-A) — Part 13: 2014-12-26 13:2014/DAmd 1 Augmented reality application format — Amendment 1: ARAF reference software and conformance ISO/IEC 23001- * Information technology — MPEG systems technologies — Part 8: Coding- 2014-12-26 8:2013/DAmd 1 independent code points — Amendment 1: New audio code points ISO/IEC DIS 11179-6 * Information technology — Metadata registries (MDR) — Part 6: Registration</p><p>(Revision of ISO/IEC 11179-6:2005)</p><p>ISO/IEC DIS 19763-1 * Information technology — Metamodel framework for interoperability (MFI) — Part 1: Framework (Revision of ISO/IEC 19763-1:2007) ISO/IEC DIS 21320-1 * Information technology — Document Container File — Part 1: Core 2014-12-11 ISO/IEC DIS 19785-1 * Information Technology — Common Biometric Exchange Formats Framework 2014-12-25 — Part 1: Data Element Specification (Revision of ISO/IEC 19785-1:2006, ISO/IEC 19785-1:2006/Amd 1:2010)</p><p>ISO/IEC DIS 30108- * Information technology — Biometric Identity Assurance Services — Part 1: 2014-11-09 1.2 BIAS services FDIS circulated Period from 01 September to 30 September 2014 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only Vote terminates TC 10 Technical product documentation ISO/FDIS 16792 * Technical product documentation — Digital product definition data practices 2014-11-19 (Revision of ISO 16792:2006)</p><p>ISO/FDIS 3098-1 * Technical product documentation — Lettering — Part 1: General requirements 2014-11-12 (Revision of ISO 3098-0:1997)</p><p>TC 22 Road vehicles ISO/FDIS 16505 * Road vehicles — Ergonomic and performance aspects of Camera Monitor 2014-11-30 Systems — Requirements and test procedures TC 23 Tractors and machinery for agriculture and forestry ISO/FDIS 13693-2 * Irrigation equipment — Safety devices for chemigation — Part 2: Chemigation 2014-11-10 valve assemblies from DN 75 to DN 350 TC 28 Petroleum products and lubricants ISO/FDIS 3679 * Determination of flash no-flash and flash point — Rapid equilibrium closed cup 2014-11-26 method (Revision of ISO 3679:2004, ISO 3680:2004)</p><p>TC 34 Food products ISO/FDIS 5527.2 * Cereals — Vocabulary 2014-11-05 (Revision of ISO 5527:1995)</p><p>TC 54 Essential oils ISO/FDIS 3064 * Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay 2014-11-09 (syn. Citrus aurantium var. bigaradia Hook f.).) (Revision of ISO 3064:2000) TC 58 Gas cylinders ISO/FDIS 21172-1 * Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for 2014-11-04 the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres TC 59 Buildings and civil engineering works ISO/FDIS 16757-1 * Data structures for electronic product catalogues for building services — Part 2014-11-10 1: Concepts, architecture and model ISO/FDIS 16745 * Environmental performance of buildings — Carbon metric of a building — Use 2014-11-10 stage TC 61 Plastics ISO/FDIS 16396-1 * Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: 2014-11-12 Designation system, marking of products and basis for specifications (Revision of ISO 1874-1:2010)</p><p>ISO/FDIS 19069-1 * Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: 2014-11-26 Designation system and basis for specifications (Revision of ISO 1873-1:1995)</p><p>TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/FDIS 15589-1 * Petroleum, petrochemical and natural gas industries — Cathodic protection of 2014-11-13 pipeline systems — Part 1: On-land pipelines (Revision of ISO 15589-1:2003)</p><p>TC 68 Financial services ISO 9564- * Financial services — Personal Identification Number (PIN) management and 2014-11-30 1:2011/FDAmd 1 security — Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1 TC 71 Concrete, reinforced concrete and pre- stressed concrete ISO/FDIS 10406-1 * Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — 2014-11-17 Part 1: FRP bars and grids (Revision of ISO 10406-1:2008)</p><p>ISO/FDIS 10406-2 * Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — 2014-11-17 Part 2: FRP sheets (Revision of ISO 10406-2:2008)</p><p>TC 110 Industrial trucks ISO/FDIS 5053-1 * Industrial trucks — Terminology and classification — Part 1: Types of industrial 2014-11-11 trucks (Revision of ISO 5053:1987) ISO/FDIS 22915-22 * Industrial trucks — Verification of stability — Part 22: Lateral- and front- stacking trucks with and without elevating operator position TC 115 Pumps ISO/ASME FDIS * Pump system energy assessment 2014-11-26 14414 TC 118 Compressors and pneumatic tools, machines and equipment ISO/FDIS 10439-2 * Petroleum, petrochemical and natural gas industries — Axial and centrifugal 2014-11-26 compressors and expander-compressors — Part 2: Non-integrally geared centrifugal and axial compressors (Revision of ISO 10439:2002)</p><p>TC 121 Anaesthetic and respiratory equipment ISO/FDIS 18835 * Inhalational anaesthesia systems — Draw-over anaesthetic systems 2014-11-04 (Revision of ISO/TS 18835:2004)</p><p>IEC/FDIS 60601-1-11 Medical electrical equipment — Part 1-11: General requirements for basic 2014-11-29 safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment (Revision of IEC 60601-1-11:2010, IEC 60601-1-11:2010/Cor 1:2011)</p><p>TC 131 Fluid power systems ISO/FDIS 3601-5 * Fluid power systems — O-rings — Part 5: Specification of elastomeric 2014-11-30 materials for industrial applications (Revision of ISO 3601-5:2002)</p><p>TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/FDIS 7509 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) 2014-11-10 pipes — Determination of time to failure under sustained internal pressure (Revision of ISO 7509:2000)</p><p>TC 156 Corrosion of metals and alloys ISO/FDIS 17224 * Corrosion of metals and alloys — Test method for high temperature corrosion 2014-11-23 testing of metallic materials by application of a deposit of salt, ash, or other substances ISO/FDIS 17245 * Corrosion of metals and alloys — Test method for high temperature corrosion 2014-11-16 testing of metallic materials by immersing in molten salt or other liquids under static conditions ISO/FDIS 17248 * Corrosion of metals and alloys — Test method for high temperature corrosion 2014-11-23 testing of metallic materials by embedding in salt, ash, or other solids TC 164 Mechanical testing of metals ISO/FDIS 6508-1 * Metallic materials — Rockwell hardness test — Part 1: Test method 2014-11-12 (Revision of ISO 6508-1:2005)</p><p>ISO/FDIS 6508-2 * Metallic materials — Rockwell hardness test — Part 2: Verification and 2014-11-26 calibration of testing machines and indenters (Revision of ISO 6508-2:2005)</p><p>ISO/FDIS 6508-3 * Metallic materials — Rockwell hardness test — Part 3: Calibration of reference 2014-11-26 blocks (Revision of ISO 6508-3:2005)</p><p>TC 174 Jewellery ISO/FDIS 18323 * Jewellery — Consumer confidence in the diamond industry 2014-11-19 TC 217 Cosmetics ISO/FDIS 16128-1 * Guidelines on technical definitions and criteria for natural & organic cosmetic 2014-11-23 ingredients and products — Part 1: Definitions for ingredients TC 242 Energy Management ISO/FDIS 50004 Energy management systems — Guidance for the implementation, maintenance and improvement of an energy management system ISO/FDIS 50006 * Energy management systems — Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) — General principles and guidance TC 244 Industrial furnaces and associated processing equipment ISO/FDIS 13574 * Industrial furnaces and associated processing equipment — Vocabulary 2014-11-20 JTC 1 Information technology ISO/IEC/IEEE FDIS Information technology — Telecommunications and information exchange 2015-02-16 8802-22 between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MCA) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands ISO/IEC/IEEE 8802- * Information technology — Telecommunications and information exchange 1AE:2013/FDAmd 1 between systems — Local and metropolitan area networks — Part 1AE: Media access control (MAC) security — Amendment 1: Galois Counter Mode— — Advanced Encryption Standard-256 (GCM-AES-256) Cipher Suite ISO/IEC/IEEE 8802- * Information technology — Telecommunications and information exchange 1AE:2013/FDAmd 2 between systems — Local and metropolitan area networks — Part 1AE: Media access control (MAC) security — Amendment 2: Extended Packet Numbering ISO/IEC/IEEE FDIS Information technology — Ubiquitous green community control network 18880 protocol ISO/IEC FDIS 27039 * Information technology — Security techniques — Selection, deployment and 2014-11-10 operations of intrusion detection systems (IDPS) (Revision of ISO/IEC 18043:2006)</p><p>ISO/IEC FDIS 27040 * Information technology — Security techniques — Storage security 2014-11-04 ISO/IEC FDIS 27043 * Information technology — Security techniques — Incident investigation 2014-11-18 principles and processes ISO/IEC FDIS 23001- * Information technology — MPEG systems technologies — Part 7: Common 2014-11-18 7 encryption in ISO base media file format files (Revision of ISO/IEC 23001-7:2012)</p><p>ISO/IEC FDIS 15944- * Information technology — Business Operational View — Part 4: Business 2014-11-30 4 transaction scenarios — Accounting and economic ontology (Revision of ISO/IEC 15944-4:2007)</p><p>ISO/IEC FDIS 29197 * Information technology — Evaluation methodology for environmental influence 2014-11-10 in biometric system performance ISO/IEC FDIS 19395 * Smart data centre resource monitoring and control</p><p>ISO/IEC FDIS 30121 * System and software engineering — Information technology — Governance of 2014-11-10 digital forensic risk framework ISO/IEC FDIS 38500 * Information technology — Governance of IT for the organization 2014-11-16 (Revision of ISO/IEC 38500:2008)</p><p>Standards published New International Standards published between 01 September and 30 September 2014 * Available in English only ** French version of standard previously published in English only Price group IIW International Institute of Welding ISO/TR 18786:2014 * Health and safety in welding — Guidelines for risk assessment of welding C fabrication activities TC 2 Fasteners ISO 10664:2014 Hexalobular internal driving feature for bolts and screws D</p><p>ISO 1891-2:2014 * Fasteners — Terminology — Part 2: Vocabulary and definitions for coatings G TC 4 Rolling bearings ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) G and tolerance values ISO 3290-1:2014 Rolling bearings — Balls — Part 1: Steel balls C</p><p>ISO 3290-2:2014 Rolling bearings — Balls — Part 2: Ceramic balls C</p><p>TC 8 Ships and marine technology ISO 18611-1:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 1: A Quality requirements ISO 18611-2:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 2: F Test methods ISO 18611-3:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 3: B Handling, transportation and storage IEC/PAS 80005- * Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) F 3:2014 Systems — General requirements TC 10 Technical product documentation ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry — Part 1: Specification of C diagrams TC 17 Steel ISO 630-5:2014 * Structural steels — Part 5: Technical delivery conditions for structural steels with C improved atmospheric corrosion resistance ISO 630-6:2014 * Structural steels — Part 6: Technical delivery conditions for seismic-proof C improved structural steels for building ISO 683-18:2014 * Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel G products ISO 16143-1:2014 * Stainless steels for general purposes — Part 1: Corrosion-resistant flat products F ISO 4995:2014 * Hot-rolled steel sheet of structural quality B TC 22 Road vehicles ISO 18541-1:2014 * Road vehicles — Standardized access to automotive repair and maintenance F information (RMI) — Part 1: General information and use case definition ISO 18541-2:2014 * Road vehicles — Standardized access to automotive repair and maintenance E information (RMI) — Part 2: Technical requirements ISO 18541-3:2014 * Road vehicles — Standardized access to automotive repair and maintenance C information (RMI) — Part 3: Functional user interface requirements ISO 15007-1:2002 Road vehicles — Measurement of driver visual behaviour with respect to transport B information and control systems — Part 1: Definitions and parameters TC 23 Tractors and machinery for agriculture and forestry ISO 11783-12:2014 Tractors and machinery for agriculture and forestry — Serial control and E communications data network — Part 12: Diagnostics services TC 28 Petroleum products and lubricants ISO/TR 19686-1:2014 * Petroleum products — Equivalency of test method determining the same property B — Part 1: Atmospheric distillation of petroleum products TC 29 Small tools ISO 6103:2014 Bonded abrasive products — Permissible unbalances of grinding wheels as D delivered — Static testing TC 34 Food products ISO 12228-2:2014 Determination of individual and total sterols contents — Gas chromatographic C method — Part 2: Olive oils and olive pomace oils ISO/TS 17383:2014 Determination of the triacylglycerol composition of fats and oils — Determination C by capillary gas chromatography TC 35 Paints and varnishes ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees D and 85 degrees ISO 13803:2014 Paints and varnishes — Determination of haze on paint films at 20 degrees B</p><p>TC 39 Machine tools ISO 14955-1:2014 Machine tools — Environmental evaluation of machine tools — Part 1: Design F methodology for energy-efficient machine tools ISO 230-10:2011/Amd Test code for machine tools — Part 10: Determination of the measuring XZ 1:2014 performance of probing systems of numerically controlled machine tools — Amendment 1: Measuring performance with scanning probes TC 42 Photography ISO 18938:2014 * Imaging materials — Optical discs — Care and handling for extended storage D TC 44 Welding and allied processes ISO 25980:2014 Health and safety in welding and allied processes — Transparent welding curtains, B strips and screens for arc welding processes TC 45 Rubber and rubber products ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners — Specification B</p><p>ISO 17324:2014 * Rubber hoses for automotive turbochargers — Specification C ISO 27126:2014 * Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the D transfer of hydrocarbons, solvents and chemicals — Specification ISO 4097:2014 * Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure C ISO 4659:2014 * Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) — B Evaluation procedure ISO 7663:2014 * Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures B ISO 2440:1997/Amd Flexible and rigid cellular polymeric materials — Accelerated ageing tests — XZ 2:2014 Amendment 2 TC 61 Plastics ISO 17541:2014 * Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility C ISO 15512:2014 Plastics — Determination of water content D</p><p>ISO 22007-6:2014 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: B Comparative method for low thermal conductivities using a temperature- modulation technique ISO 12000:2014 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) A — Definitions and review of test methods ISO 19066-1:2014 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding B and extrusion materials — Part 1: Designation system and basis for specifications TC 71 Concrete, reinforced concrete and pre- stressed concrete ISO 19338:2014 * Performance and assessment requirements for design standards on structural B concrete TC 79 Light metals and their alloys ISO 6361-2:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: G Mechanical properties ISO 6361-3:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: A Strips: Tolerances on shape and dimensions ISO 6361-4:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: C Sheets and plates: Tolerances on shape and dimensions ISO 6362-2:2014 * Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles D — Part 2: Mechanical properties ISO 6362-7:2014 * Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles A — Part 7: Chemical composition TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 16641:2014 Measurement of radioactivity in the environment — Air — Radon 220: Integrated C measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors TC 106 Dentistry ISO 16635-2:2014 Dentistry — Dental rubber dam instruments — Part 2: Clamp forceps A</p><p>TC 121 Anaesthetic and respiratory equipment ISO 5359:2014 Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use D with medical gases TC 127 Earth-moving machinery ISO 17253:2014 * Earth-moving machinery and rough-terrain variable-reach trucks — Design C requirements for machines intended to be driven on road TC 131 Fluid power systems ISO 16908:2014 Hydraulic filter element test methods — Thermal conditioning and cold start-up C simulation TC 147 Water quality ISO 16308:2014 Water quality — Determination of glyphosate and AMPA — Method using high D performance liquid chromatography (HPLC) with tandem mass spectrometric detection ISO 9308-1:2014 Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: B Membrane filtration method for waters with low bacterial background flora TC 150 Implants for surgery ISO 12891-2:2014 * Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical E implants ISO 5832-4:2014 Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum A casting alloy ISO 5832-11:2014 Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium A 7-niobium alloy TC 160 Glass in building ISO 11485-3:2014 Glass in building — Curved glass — Part 3: Requirements for curved tempered B and curved laminated safety glass TC 164 Mechanical testing of metals ISO 6506-1:2014 Metallic materials — Brinell hardness test — Part 1: Test method C</p><p>ISO 6506-2:2014 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of C testing machines ISO 6506-3:2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks B</p><p>ISO 6506-4:2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values B</p><p>TC 171 Document management applications ISO/TR 17797:2014 * Electronic archiving — Selection of digital storage media for long term preservation D ISO/TR 18160:2014 * Document management — Digital preservation — Analog recording to silver- B gelatin microform TC 172 Optics and photonics ISO 14135-1:2014 * Optics and photonics — Specifications for telescopic sights — Part 1: General- A purpose instruments ISO 14135-2:2014 * Optics and photonics — Specifications for telescopic sights — Part 2: High- A performance instruments ISO 9345-2:2014 * Microscopes — Imaging distances related to mechanical reference planes — Part B 2: Infinity-corrected optical systems ISO 8598-1:2014 Optics and optical instruments — Focimeters — Part 1: General purpose E instruments ISO 11978:2014 Ophthalmic optics — Contact lenses and contact lens care products — Labelling B</p><p>ISO 11979-6:2014 Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport B stability testing ISO 14730:2014 Ophthalmic optics — Contact lens care products — Antimicrobial preservative D efficacy testing and guidance on determining discard date ISO 18259:2014 * Ophthalmic optics — Contact lens care products — Method to assess contact lens B care products with contact lenses in a lens case, challenged with bacterial and fungal organisms ISO/TS 19979:2014 * Ophthalmic optics — Contact lenses — Hygienic management of multipatient use B trial contact lenses IEC 80601-2-58:2014 * Medical electrical equipment — Part 2-58: Particular requirements for basic safety G and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery TC 173 Assistive products for persons with disability ISO 7176-22:2014 Wheelchairs — Part 22: Set-up procedures E</p><p>TC 189 Ceramic tile ISO 10545-1:2014 Ceramic tiles — Part 1: Sampling and basis for acceptance B TC 190 Soil quality ISO 14388-1:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 1: C Introduction and definitions, symbols and acronyms, sampling and sample preparation ISO 14388-2:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 2: C Chromium reducible sulfur (CRS) methodology TC 193 Natural gas ISO/TR 22302:2014 Natural gas — Calculation of methane number B</p><p>ISO 16960:2014 Natural gas — Determination of sulfur compounds — Determination of total sulfur B by oxidative microcoulometry method TC 194 Biological and clinical evaluation of medical devices ISO 10993-3:2014 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, E carcinogenicity and reproductive toxicity TC 195 Building construction machinery and equipment ISO 18650-2:2014 Building construction machinery and equipment — Concrete mixers — Part 2: D Procedure for examination of mixing efficiency TC 201 Surface chemical analysis ISO 17560:2014 * Surface chemical analysis — Secondary-ion mass spectrometry — Method for B depth profiling of boron in silicon TC 204 Intelligent transport systems ISO/TS 21219-2:2014 * Intelligent transport systems — Traffic and travel information (TTI) via transport F protocol experts group, generation 2 (TPEG2) — Part 2: UML modelling rules TC 207 Environmental management ISO/TS 14071:2014 Environmental management — Life cycle assessment — Critical review processes B and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 TC 212 Clinical laboratory testing and in vitro diagnostic test systems ISO 15189:2012 * Medical laboratories — Requirements for quality and competence G TC 213 Dimensional and geometrical product specifications and verification ISO 16610-71:2014 Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal D filters: Gaussian regression filters TC 215 Health informatics ISO 17090-4:2014 * Health informatics — Public key infrastructure — Part 4: Digital Signatures for D healthcare documents ISO 22600-1:2014 Health informatics — Privilege management and access control — Part 1: E Overview and policy management ISO 22600-2:2014 Health informatics — Privilege management and access control — Part 2: Formal D models ISO 22600-3:2014 Health informatics — Privilege management and access control — Part 3: G Implementations TC 217 Cosmetics ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits A</p><p>TC 244 Industrial furnaces and associated processing equipment ISO 13577-2:2014 * Industrial furnaces and associated processing equipment — Safety — Part 2: H Combustion and fuel handling systems JTC 1 Information technology ISO/IEC 8824- * Information technology — Abstract Syntax Notation One (ASN.1): Specification of free 1:2008/Cor 2:2014 basic notation — Part 1: — Technical Corrigendum 2 ISO/IEC 8824- * Information technology — Abstract Syntax Notation One (ASN.1): free 4:2008/Cor 1:2014 Parameterization of ASN.1 specifications — Part 4: — Technical Corrigendum 1 ISO/IEC 8825- * Information technology — ASN.1 encoding rules: Specification of Basic Encoding free 1:2008/Cor 2:2014 Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1: — Technical Corrigendum 2 ISO/IEC 8825- * Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — free 4:2008/Cor 2:2014 Part 4: — Technical Corrigendum 2 ISO/IEC 8825- * Information technology — ASN.1 encoding rules: Mapping W3C XML schema free 5:2008/Cor 2:2014 definitions into ASN.1 — Part 5: — Technical Corrigendum 2 ISO/IEC 17811- * Information Technology — Device control and management — Part 3: C 3:2014 Specification of Reliable Message Delivery Protocol ISO/IEC 1539- * Information technology — Programming languages — Fortran — Part 1: Base free 1:2010/Cor 3:2014 language — Technical Corrigendum 3 ISO/IEC * Information technology — Security techniques — Random bit generation — free 18031:2011/Cor Technical Corrigendum 1 1:2014 ISO/IEC * Information technology — Security techniques — Authenticated encryption — free 19772:2009/Cor Technical Corrigendum 1 1:2014 ISO/IEC * Information technology — Security techniques — Information security free 27001:2013/Cor management systems — Requirements — Technical Corrigendum 1 1:2014 ISO/IEC * Information technology — Security techniques — Code of practice for information free 27002:2013/Cor security controls — Technical Corrigendum 1 1:2014 ISO/IEC 18000- * Information technology — Radio frequency identification for item management — H 7:2014 Part 7: Parameters for active air interface communications at 433 MHz Standards confirmed The following International Standards are confimred for a five year period: TC 2 Fasteners ISO 1478:1999 (reconfirmed) ISO 10666:1999 (reconfirmed) ISO 15480:1999 (reconfirmed) ISO 15481:1999 (reconfirmed) ISO 15482:1999 (reconfirmed) ISO 15483:1999 (reconfirmed) ISO 4042:1999</p><p>TC 5 Ferrous metal pipes and metallic fittings ISO 3419:1981 (reconfirmed) ISO 7005-2:1988 (reconfirmed) ISO 7005-3:1988 (reconfirmed) TC 6 Paper, board and pulps ISO 8791-3:2005</p><p>TC 8 Ships and marine technology ISO 15516:2006 (reconfirmed) TC 20 Aircraft and space vehicles ISO 2574:1994 (reconfirmed) ISO 5866:1983 (reconfirmed) ISO 6859-1:1982 (reconfirmed) ISO 8668-1:1986 (reconfirmed) ISO 8668-3:1994 (reconfirmed) ISO 5843-1:1985 (reconfirmed) ISO 5843-8:1988 (reconfirmed) TC 22 Road vehicles ISO 6813:1998 (reconfirmed) ISO 12353-2:2003 (reconfirmed) ISO 13216-1:1999 (reconfirmed) ISO 13216-2:2004 (reconfirmed) TC 23 Tractors and machinery for agriculture and forestry ISO 789-12:2000 ISO 11520-1:1997 (reconfirmed) ISO 17080:2005 (reconfirmed) TC 24 Particle characterization including sieving ISO 13317-1:2001</p><p>ISO 13318-1:2001</p><p>ISO 15900:2009</p><p>ISO 15901-3:2007</p><p>ISO 21501-2:2007</p><p>ISO 21501-3:2007</p><p>TC 28 Petroleum products and lubricants ISO 2049:1996 (reconfirmed) TC 29 Small tools ISO 13942:2000</p><p>ISO 691:2005 (reconfirmed) ISO 1174-2:1996 (reconfirmed) ISO 1703:2005 (reconfirmed) ISO 9243:1988 (reconfirmed) TC 30 Measurement of fluid flow in closed conduits ISO 6817:1992 (reconfirmed) ISO 13359:1998 (reconfirmed) TC 34 Food products ISO 659:2009</p><p>ISO 3727-3:2003 (reconfirmed) ISO 5764:2009</p><p>ISO 6730:2005 (reconfirmed) ISO 7889:2003 (reconfirmed) ISO 8156:2005 (reconfirmed) ISO 8262-1:2005 (reconfirmed) ISO 8262-2:2005 (reconfirmed) ISO 8262-3:2005 (reconfirmed) ISO 8967:2005 (reconfirmed) ISO 9232:2003 (reconfirmed) ISO 11866-1:2005 (reconfirmed) ISO 11866-2:2005 (reconfirmed) ISO 13875:2005 (reconfirmed) ISO 14461-1:2005 (reconfirmed) ISO 14461-2:2005 (reconfirmed) ISO 14674:2005 (reconfirmed) ISO 15322:2005 (reconfirmed) ISO 22935-1:2009</p><p>ISO 22935-2:2009</p><p>ISO 22935-3:2009</p><p>ISO 26323:2009</p><p>ISO/TS 19036:2006 (reconfirmed) ISO 5983-2:2009</p><p>TC 35 Paints and varnishes ISO 11998:2006</p><p>ISO 8501-3:2006 (reconfirmed) ISO 11126-9:1999 (reconfirmed) TC 36 Cinematography ISO 2404:1986 (reconfirmed) ISO 6035:1983 (reconfirmed) TC 38 Textiles ISO 4167:2006 (reconfirmed) ISO 105-F10:1989 (reconfirmed) ISO 7768:2009</p><p>ISO 7769:2009</p><p>ISO 7770:2009</p><p>TC 39 Machine tools ISO 230-3:2007</p><p>TC 44 Welding and allied processes ISO 5173:2009</p><p>ISO 14327:2004</p><p>ISO 5172:2006 (reconfirmed) ISO/TR 17671-2:2002</p><p>ISO 9455-17:2002 TC 45 Rubber and rubber products ISO 1307:2006 (reconfirmed) ISO 1401:1999 (reconfirmed) ISO 1402:2009</p><p>ISO 1436:2009</p><p>ISO 2398:2006 (reconfirmed) ISO 3949:2009</p><p>ISO 4023:2009</p><p>ISO 4079:2009</p><p>ISO 4080:2009</p><p>ISO 5774:2006 (reconfirmed) ISO 7662:1988 (reconfirmed) ISO 8031:2009</p><p>ISO 5478:2006 (reconfirmed) ISO 705:1994 (reconfirmed) ISO 1125:1999 (reconfirmed) ISO 1126:2006 (reconfirmed) ISO 1304:2006 (reconfirmed) ISO 1409:2006 (reconfirmed) ISO 1658:2009</p><p>ISO 2006-1:2009</p><p>ISO 2006-2:2009</p><p>ISO 2028:1999 (reconfirmed) ISO 2930:2009</p><p>ISO 4655:1985 (reconfirmed) ISO 6209:2009</p><p>ISO 6225-1:2006 (reconfirmed) ISO 8312:1999 (reconfirmed) ISO 9252:1989 (reconfirmed) ISO 11235:1999 (reconfirmed) ISO/TS 16176:2011</p><p>ISO 20299-1:2006 (reconfirmed) ISO 21171:2006 (reconfirmed) ISO 21869:2006 (reconfirmed) ISO 22768:2006 (reconfirmed) ISO 2231:1989 (reconfirmed) ISO 2321:2006 (reconfirmed) ISO 4646:1989 (reconfirmed) ISO 5979:1982 (reconfirmed) ISO 6451:1982 (reconfirmed) ISO 25518:2009</p><p>TC 46 Information and documentation ISO 8459:2009</p><p>ISO 28500:2009</p><p>TC 47 Chemistry ISO 11014:2009</p><p>TC 58 Gas cylinders ISO 25760:2009</p><p>TC 59 Buildings and civil engineering works ISO 13640:1999 (reconfirmed) TC 61 Plastics ISO 10093:1998</p><p>ISO 1269:2006 (reconfirmed) ISO 16770:2004</p><p>TC 69 Applications of statistical methods ISO 5725-5:1998 (reconfirmed) ISO 11843-4:2003 (reconfirmed) TC 71 Concrete, reinforced concrete and pre-stressed concrete ISO 1920-5:2004 (reconfirmed) ISO 6274:1982 (reconfirmed) ISO 6782:1982 (reconfirmed) ISO 6783:1982 (reconfirmed) ISO 7033:1987 (reconfirmed) TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO 8536-3:2009</p><p>TC 86 Refrigeration and air-conditioning ISO/R 916:1968 (reconfirmed) TC 94 Personal safety -- Protective clothing and equipment ISO 13982-2:2004</p><p>ISO 16602:2007</p><p>TC 98 Bases for design of structures ISO 4354:2009</p><p>TC 100 Chains and chain sprockets for power transmission and conveyors ISO 13203:2005 (reconfirmed) TC 106 Dentistry ISO 4049:2009</p><p>ISO 6877:2006 (reconfirmed) ISO/TS 14569-2:2001 (reconfirmed) TC 108 Mechanical vibration, shock and condition monitoring ISO 19499:2007</p><p>ISO 2631-1:1997 (reconfirmed) ISO 2631- 1:1997/Amd 1:2010 ISO 5805:1997 (reconfirmed) TC 110 Industrial trucks ISO 5053:1987 (reconfirmed) TC 113 Hydrometry ISO 4362:1999 (reconfirmed) TC 117 Fans ISO 27327-1:2009</p><p>TC 118 Compressors and pneumatic tools, machines and equipment ISO 5388:1981 (reconfirmed) TC 119 Powder metallurgy ISO 2740:2009</p><p>ISO 3327:2009</p><p>TC 122 Packaging ISO 6590-1:1983 (reconfirmed) ISO 6591-1:1984 (reconfirmed) ISO 6591-2:1985 (reconfirmed) ISO 6599-1:1983 (reconfirmed) ISO 7023:1983 (reconfirmed) ISO 7965-1:1984 (reconfirmed) ISO 7965-2:1993 (reconfirmed) ISO 8367-1:1993 (reconfirmed) ISO 8367-2:1993 (reconfirmed) ISO 15867:2003 (reconfirmed) TC 126 Tobacco and tobacco products ISO 18144:2003 (reconfirmed) ISO 18145:2003 (reconfirmed) ISO 21147:2003 (reconfirmed) TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 1167-2:2006 (reconfirmed) ISO 18672-1:2009</p><p>TC 146 Air quality ISO 15767:2009</p><p>ISO 16622:2002 (reconfirmed) ISO 16000-14:2009</p><p>TC 147 Water quality ISO/TS 20612:2007 (reconfirmed) ISO 22478:2006 (reconfirmed) ISO 23631:2006 (reconfirmed) ISO 14442:2006 (reconfirmed) TC 153 Valves ISO 7121:2006 (reconfirmed) TC 156 Corrosion of metals and alloys ISO 10062:2006 (reconfirmed) ISO 11306:1998 (reconfirmed) ISO 11474:1998 (reconfirmed) ISO 11782-1:1998 (reconfirmed) ISO 11782-2:1998 (reconfirmed) ISO 11844-1:2006 (reconfirmed) ISO 11844-2:2005 (reconfirmed) ISO 16151:2005 (reconfirmed) ISO 16784-1:2006 (reconfirmed) ISO 16784-2:2006 (reconfirmed) ISO 17475:2005 (reconfirmed) TC 163 Thermal performance and energy use in the built environment ISO 12567-2:2005 (reconfirmed) TC 165 Timber structures ISO 16670:2003 (reconfirmed) TC 171 Document management applications ISO 11506:2009</p><p>TC 172 Optics and photonics ISO 10110-8:2010</p><p>ISO 10935:2009</p><p>ISO 11884-1:2006 (reconfirmed) ISO 11884-2:2007 (reconfirmed) TC 174 Jewellery ISO 11489:1995 (reconfirmed) TC 190 Soil quality ISO 11272:1998 (reconfirmed) ISO 11274:1998 (reconfirmed) ISO 11508:1998 (reconfirmed) TC 192 Gas turbines ISO 21789:2009</p><p>TC 201 Surface chemical analysis ISO 23812:2009</p><p>TC 206 Fine ceramics ISO 15732:2003 (reconfirmed) ISO 18452:2005 (reconfirmed) ISO 18755:2005 (reconfirmed) ISO 18756:2003 (reconfirmed) ISO 20502:2005 (reconfirmed) ISO 20505:2005 (reconfirmed) ISO 20508:2003 (reconfirmed) ISO 24369:2005 (reconfirmed) ISO 24370:2005 (reconfirmed) ISO 26423:2009</p><p>JTC 1 Information technology ISO/IEC 11801:2002</p><p>ISO/IEC 19793:2008</p><p>ISO/IEC 19796- 3:2009 Standards withdrawn Period from 01 September to 30 September 2014 TC 10 Technical product documentation ISO 10628:1997 (replaced by ISO 10628-1:2014, ISO 10628-2:2012) TC 17 Steel ISO 4952:2006 (replaced by ISO 630-5:2014) ISO 24314:2006 (replaced by ISO 630-6:2014) TC 20 Aircraft and space vehicles ISO/PAS 21100:2011 (replaced by ISO 21100:2014) TC 34 Food products ISO 12228:1999 (replaced by ISO 12228-1:2014, ISO 12228-2:2014) TC 61 Plastics ISO 10366-1:2002 (replaced by ISO 19066-1:2014) TC 172 Optics and photonics ISO 8598:1996 (replaced by ISO 8598-1:2014) TC 215 Health informatics ISO/TS 22600-1:2006 (replaced by ISO 22600-1:2014) ISO/TS 22600-2:2006 (replaced by ISO 22600-2:2014) ISO/TS 22600-3:2009 (replaced by ISO 22600-3:2014) Meeting calendar (update at 01 September 2014) Meetings called for the month of August are not in this edition. * Information definite but meeting not yet formally convened ** Provisional September-November 2014 4-4 Beijing (China) TC 83 Sports and other recreational facilities and equipment</p><p>September-October 2014 22-3 Salamanca (Spain) JTC 1/SC 17 Information technology/Cards and personal identification</p><p>29-2 Berlin (Germany) PC 272 Forensic sciences</p><p>29-3 Bad Kohlgrub TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory (Germany) protective devices 29-3 Paris (France) TC 218 Timber</p><p>30-1 London (United PC 286 Collaborative business relationship management -- Framework Kingdom) 30-3 Fortaleza (Brazil) TC 28 Petroleum products and lubricants</p><p>October 2014 1 Fortaleza (Brazil) TC 28/SC 4 Petroleum products and lubricants/Classifications and specifications 1 Fortaleza (Brazil) TC 28/SC 7 Petroleum products and lubricants/Liquid Biofuels</p><p>1 Milan (Italy) TC 39/SC 4 Machine tools/Woodworking machines</p><p>3 Colombo (Sri Lanka) JTC 1/SC 2 Information technology/Coded character sets</p><p>3 Paris (France) TC 86/SC 1 Refrigeration and air-conditioning/Safety and environmental requirements for refrigerating systems 3 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refrigerants and refrigeration lubricants 6 Seattle (USA) JTC 1/SC 31 Information technology/Automatic identification and data capture techniques 6 Genoa (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts 6 Bremen (Germany) TC 20/SC 6 Aircraft and space vehicles/Standard atmosphere</p><p>6-8 Bremen (Germany) TC 20 Aircraft and space vehicles</p><p>6-10 Sao Paulo (Brazil) JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS) 6-10 Berlin (Germany) TC 215 Health informatics 6-11 Prague (Czech TC 135 Non-destructive testing Republic) 8 Virtual (Unknown) President&apos;s President&apos;s committee committee 8 Hamburg (Germany) TC 8/SC 7 Ships and marine technology/Inland navigation vessels</p><p>8 San Antonio (USA) TC 70 Internal combustion engines</p><p>8 Vienna (Austria) TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications 8-9 San Antonio (USA) TC 70/SC 8 Internal combustion engines/Exhaust gas emission measurement</p><p>8-10 London (United TC 25 Cast irons and pig irons Kingdom) 9 Beijing (China) TC 180/SC 1 Solar energy/Climate - Measurement and data</p><p>9 Beijing (China) TC 180/SC 4 Solar energy/Systems - Thermal performance, reliability and durability 9-10 Bremen (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems</p><p>10 Tokyo (Japan) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis) 10 Copenhagen TC 34/SC 18 Food products/Cocoa (Denmark) 10 Paris (France) TC 92/SC 1 Fire safety/Fire initiation and growth</p><p>10 Beijing (China) TC 180 Solar energy</p><p>13- Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials 14 13- Miami (USA) TC 44/SC 3 Welding and allied processes/Welding consumables 15 13- Antigua (Guatemala) TC 285 Clean cookstoves and clean cooking solutions 15 13- Tromsø (Norway) TC 67/SC 8 Materials, equipment and offshore structures for petroleum, 16 petrochemical and natural gas industries/Arctic operations 13- London (United TC 131 Fluid power systems 17 Kingdom) 13- Kuala Lumpur TC 181 Safety of toys 17 (Malaysia) 14- Suzhou (China) TC 164/SC 5 Mechanical testing of metals/Fatigue testing 16 14- Buenos Aires TC 279 Innovation management 17 (Argentina) 15 Suzhou (China) TC 164/SC 1 Mechanical testing of metals/Uniaxial testing</p><p>15 Suzhou (China) TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T) 15- Pirmasens (Germany) TC 137 Footwear sizing designations and marking systems 16 15- Toronto (Canada) TC 212 Clinical laboratory testing and in vitro diagnostic test systems 17 16 Suzhou (China) TC 164/SC 3 Mechanical testing of metals/Hardness testing</p><p>16 Pirmasens (Germany) TC 216 Footwear</p><p>16- Praha (Czech TC 58/SC 2 Gas cylinders/Cylinder fittings 17 Republic) 16- Suzhou (China) TC 164/SC 2 Mechanical testing of metals/Ductility testing 17 17 Tokyo (Japan) TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles 17 London (United TC 131/SC 5 Fluid power systems/Control products and components Kingdom) 17 London (United TC 131/SC 9 Fluid power systems/Installations and systems Kingdom) 17 Seoul (Korea, TC 153 Valves Republic of) 17 Seoul (Korea, TC 153/SC 1 Valves/Design, manufacture, marking and testing Republic of) 20- Seoul (Korea, TC 209 Cleanrooms and associated controlled environments 21 Republic of) 20- Liège (Belgium) TC 266 Biomimetics 22 20- Tokyo (Japan) TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually 23 portable forest machinery 20- London (United JTC 1/SC 6 Information technology/Telecommunications and information 24 Kingdom) exchange between systems 20- Mexico City (Mexico) JTC 1/SC 27 Information technology/IT Security techniques 24 20- Strasbourg (France) JTC 1/SC 29 Information technology/Coding of audio, picture, multimedia and 24 hypermedia information 20- Prague (Czech TC 121/SC 6 Anaesthetic and respiratory equipment/Medical gas systems 24 Republic) 20- Nunspeet TC 149/SC 1 Cycles/Cycles and major sub-assemblies 24 (Netherlands) 20- Incheon (Korea, TC 154 Processes, data elements and documents in commerce, industry 24 Republic of) and administration 20- St. Petersburg, TC 188/SC 1 Small craft/Personal safety equipment 24 Florida (USA) 20- Berlin (Germany) TC 190 Soil quality 24 20- Berlin (Germany) TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification 24 20- Berlin (Germany) TC 190/SC 2 Soil quality/Sampling 24 20- Berlin (Germany) TC 190/SC 3 Soil quality/Chemical methods and soil characteristics 24 20- Berlin (Germany) TC 190/SC 4 Soil quality/Biological methods 24 20- Berlin (Germany) TC 190/SC 7 Soil quality/Soil and site assessment 24 21 Seoul (Korea, TC 138/SC 1 Plastics pipes, fittings and valves for the transport of Republic of) fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage) 21 Virtual (Unknown) TC 173/SC 2 Assistive products for persons with disability/Classification and terminology 21- Seoul (Korea, TC 58/SC 3 Gas cylinders/Cylinder design 23 Republic of) 22 Vienna (Austria) TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions 22 Vienna (Austria) TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details</p><p>22 Seoul (Korea, TC 138/SC 2 Plastics pipes, fittings and valves for the transport of Republic of) fluids/Plastics pipes and fittings for water supplies 22 Seoul (Korea, TC 138/SC 4 Plastics pipes, fittings and valves for the transport of Republic of) fluids/Plastics pipes and fittings for the supply of gaseous fuels 22- Paris (France) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability 23 23 Vienna (Austria) TC 123/SC 5 Plain bearings/Quality analysis and assurance</p><p>23 Vienna (Austria) TC 123/SC 6 Plain bearings/Terms and common items</p><p>23 Seoul (Korea, TC 138/SC 3 Plastics pipes, fittings and valves for the transport of Republic of) fluids/Plastics pipes and fittings for industrial applications 23 Seoul (Korea, TC 138/SC 5 Plastics pipes, fittings and valves for the transport of Republic of) fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications 23 Seoul (Korea, TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves Republic of) and auxiliary equipment of plastics materials 23 Seoul (Korea, TC 138/SC 8 Plastics pipes, fittings and valves for the transport of Republic of) fluids/Rehabilitation of pipeline systems 23- Seoul (Korea, TC 58 Gas cylinders 24 Republic of) 23- Tokyo (Japan) TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation 24 coatings on aluminium 23- Pretoria (South TC 178 Lifts, escalators and moving walks 24 Africa) 24 Sydney (Australia) TC 92/SC 3 Fire safety/Fire threat to people and environment</p><p>24 Sydney (Australia) TC 92/SC 4 Fire safety/Fire safety engineering</p><p>24 Vienna (Austria) TC 123 Plain bearings</p><p>24 Vienna (Austria) TC 123/SC 7 Plain bearings/Special types of plain bearings</p><p>24 Seoul (Korea, TC 138 Plastics pipes, fittings and valves for the transport of fluids Republic of) 24 Paris (France) TC 227 Springs 27 Panama (Panama) TC 8/SC 6 Ships and marine technology/Navigation and ship operations</p><p>27 Panama (Panama) TC 8/SC 11 Ships and marine technology/Intermodal and Short Sea Shipping</p><p>27 Panama (Panama) TC 8/SC 13 Ships and marine technology/Marine technology</p><p>27- London (United PC 280 Management Consultancy 29 Kingdom) 27- St-Louis (USA) JTC 1/SC 22 Information technology/Programming languages, their 30 environments and system software interfaces 27- Panama (Panama) TC 8 Ships and marine technology 31 27- Vancouver (Canada) TC 204 Intelligent transport systems 31 27- Berlin (Germany) TC 264 Fireworks 31 28 Toronto (Canada) TC 59/SC 8 Buildings and civil engineering works/Sealants</p><p>28 Vienna (Austria) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium 28- New York (USA) TC 5 Ferrous metal pipes and metallic fittings 29 28- Berlin (Germany) TC 23/SC 3 Tractors and machinery for agriculture and forestry/Safety and 29 comfort 28- Paris (France) TC 290 Online reputation 29 28- Sydney (Australia) TC 17/SC 1 Steel/Methods of determination of chemical composition 30 29 Toronto (Canada) TC 59/SC 14 Buildings and civil engineering works/Design life</p><p>29 Toronto (Canada) TC 59/SC 15 Buildings and civil engineering works/Performance description of houses 29 Vienna (Austria) TC 79 Light metals and their alloys</p><p>29 London (United TC 104/SC 2 Freight containers/Specific purpose containers Kingdom) 29- Tokyo (Japan) TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and 31 components 31 Toronto (Canada) TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages 31 Toronto (Canada) TC 59/SC 17 Buildings and civil engineering works/Sustainability in buildings and civil engineering works November 2014 1 Toronto (Canada) TC 59 Buildings and civil engineering works</p><p>1 Toronto (Canada) TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in building construction 1 Toronto (Canada) TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works 2-7 Belfort (France) TC 184/SC 4 Automation systems and integration/Industrial data 3-4 Tel Aviv (Israel) TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation</p><p>3-5 Madrid (Spain) PC 252 Natural gas fuelling stations for vehicles</p><p>3-5 Washington, D.C TC 241 Road traffic safety management systems (USA) 3-7 Singapore PC 277 Sustainable procurement (Singapore) 3-7 Cape Town (South TC 45 Rubber and rubber products Africa) 3-7 Cape Town (South TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose Africa) assemblies 3-7 Cape Town (South TC 45/SC 2 Rubber and rubber products/Testing and analysis Africa) 3-7 Wuhan (China) TC 183 Copper, lead, zinc and nickel ores and concentrates</p><p>3-7 New Delhi (India) TC 229 Nanotechnologies</p><p>3-7 Lisbon (Portugal) TC 282 Water re-use</p><p>5-6 Lisbon (Portugal) TC 34/SC 4 Food products/Cereals and pulses</p><p>5-6 Tel Aviv (Israel) TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems 6 Cape Town (South TC 45/SC 4 Rubber and rubber products/Products (other than hoses) Africa) 6 Istanbul (Turkey) TC 270 Plastics and rubber machines</p><p>7 San Diego (USA) TC 22/SC 10 Road vehicles/Impact test procedures</p><p>7 San Diego (USA) TC 22/SC 12 Road vehicles/Passive safety crash protection systems</p><p>7 Cape Town (South TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for Africa) use in the rubber industry 10- Edinburgh (United TC 171/SC 2 Document management applications/Application issues 11 Kingdom) 11- Ottawa (Canada) TC 244 Industrial furnaces and associated processing equipment 14 12 LEMONT (USA) TC 22/SC 3 Road vehicles/Electrical and electronic equipment</p><p>13- Berlin (Germany) TC 182/SC 1 Geotechnics/Geotechnical investigation and testing 14 14- Beijing (China) TC 130 Graphic technology 20 15- Abu Dhabi (United JTC 1 Information technology 20 Arab Emirates) 17- Florida (USA) TC 108/SC 2 Mechanical vibration, shock and condition 21 monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures 18- Madrid (Spain) TC 34/SC 7 Food products/Spices, culinary herbs and condiments 20 19 Trondheim (Norway) TC 234 Fisheries and aquaculture 19- Delft (Netherlands) TC 23/SC 13 Tractors and machinery for agriculture and forestry/Powered 21 lawn and garden equipment 20 Virtual (Unknown) CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)</p><p>24- Paris (France) PC 287 Chain of custody of wood and wood-based products 28 24- Shenzen (China) TC 211 Geographic information/Geomatics 28 26- Frankfurt (Germany) * TC 184/SC 1 Automation systems and integration/Physical device control 28 28 London (United TC 158 Analysis of gases Kingdom) December 2014 1-4 Copenhagen TC 98 Bases for design of structures (Denmark) 1-5 Dublin (Ireland) TC 260 Human resource management</p><p>3-5 Tokyo (Japan) TC 232 Learning services outside formal education</p><p>3-5 Paris (France) TC 269 Railway applications</p><p>4-5 Fukuoka (Japan) TC 197 Hydrogen technologies</p><p>8-10 London (United TC 147/SC 3 Water quality/Radioactivity measurements Kingdom) 9-12 Madrid (Spain) PC 273 Customer contact centres</p><p>17 Frankfurt (Germany) TC 291 Domestic gas cooking appliances</p><p>1-4 Copenhagen TC 98/SC 2 Bases for design of structures/Reliability of structures (Denmark) 1-4 Copenhagen TC 98/SC 3 Bases for design of structures/Loads, forces and other actions (Denmark) January 2015 12- Weinheim (Germany) * TC 69/SC 4 Applications of statistical methods/Applications of statistical 16 methods in process management 19- Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics 20 19- Copenhagen * JTC 1/SC 35 Information technology/User interfaces 23 (Denmark) 22- Cape Town (South * TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting 23 Africa) and allied processes 25- Foshan (China) TC 107 Metallic and other inorganic coatings 29 25- Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings 29 and related finishes 25- Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion 29 coatings February 2015 2-5 Beijing (China) TC 257 Evaluation of energy savings</p><p>3-13 London (United * TC 213 Dimensional and geometrical product specifications and Kingdom) verification 11 Geneva (Switzerland) * CSC/SPC Council/Strategy and Policy Committee (CSC/SPC) 22- Miami (USA) * TMB Technical Management Board 23 St. Petersburg, ** TC 115 Pumps Florida (USA) March 2015 9-13 (Unknown) ** TC 110/SC 4 Industrial trucks/Rough-terrain trucks 9-13 Morioka (Japan) * TC 223 Societal security 12 West Conshohocken TC 221 Geosynthetics (Philadelphia) (USA) 17- Geneva (Switzerland) * COUNCIL Council 18 23- Vienna (Austria) * JTC 1/SC 38 Information technology/Distributed application platforms and 27 services (DAPS) Rio de Janeiro ** PC 287 Chain of custody of wood and wood-based products (Brazil) March-June 2015 25- Nara (Japan) * TC 184 Automation systems and integration 26 March-April 2015 31-2 Montreal (Canada) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment 1st Quarter 2015 (United Kingdom) ** PC 284 Management system for private security operations - Requirements with guidance Paris (France) * TC 24/SC 4 Particle characterization including sieving/Particle characterization Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.) Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests</p><p>April 2015 13- Lyon (France) TC 117 Fans 14 13- Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and 17 appliances 13- (Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and 17 wastewater systems - Quality criteria of the service and performance indicators 20- San Francisco (USA) * TC 215 Health informatics 24 21- (Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, 22 petrochemical and natural gas industries/Pipeline transportation systems 23 Düsseldorf * TC 44/SC 11 Welding and allied processes/Qualification requirements for (Germany) welding and allied processes personnel 24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board 25 Atlanta (USA) ** TC 6 Paper, board and pulps (France) ** TC 29 Small tools</p><p>(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items (USA) ** TC 34/SC 15 Food products/Coffee</p><p>May 2015 1-7 (United Kingdom) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment 4-7 Toronto (Canada) * TC 68 Financial services 4-8 Kuching (Malaysia) ** JTC 1/SC 27 Information technology/IT Security techniques 4-8 (Unknown) ** TC 36 Cinematography 8-15 Tokyo (Japan) ** TC 10 Technical product documentation 11- Kuching (Malaysia) * JTC 1/SC 27 Information technology/IT Security techniques 12 11- Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Interoperability, integration, 15 and architectures for enterprise systems and automation applications 11- Bologna (Italy) ** TC 130 Graphic technology 16 12- London (United ** TC 156 Corrosion of metals and alloys 15 Kingdom) 13 Paris (France) ** TC 87 Cork 18- (Brazil) ** JTC 1/SC 40 Information technology/IT Service Management and IT 22 Governance 18- London (United ** TC 4 Rolling bearings 22 Kingdom) 18- Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools 22 18- Luzern (Switzerland) * TC 114 Horology 22 22 Cape Town (South * TC 228 Tourism and related services Africa) 26- (Argentina) ** TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological 29 protection/Nuclear fuel cycle 27 London (United ** TC 67/SC 5 Materials, equipment and offshore structures for petroleum, Kingdom) petrochemical and natural gas industries/Casing, tubing and drill pipe Glasgow, Scotland ** JTC 1/SC 32 Information technology/Data management and interchange (United Kingdom) 8-15 Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions 8-15 Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Mechanical engineering documentation 8-15 Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation Madrid (Spain) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems Tokyo (Japan) ** TC 113 Hydrometry Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods</p><p>Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures Tokyo (Japan) ** TC 113/SC 5 Hydrometry/Instruments, equipment and data management</p><p>Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water</p><p>London (United ** TC 131/SC 6 Fluid power systems/Contamination control Kingdom) June 2015 1-5 Sapporo (Japan) ** TC 42 Photography 1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics 1-6 Philadelphia (USA) ** TC 147 Water quality 3-5 (Japan) ** TC 145 Graphical symbols 8-12 Berlin (Germany) ** TC 121 Anaesthetic and respiratory equipment 9-12 Pretoria (South ** REMCO Committee on reference materials Africa) 10- (France) ** TC 17/SC 9 Steel/Tinplate and blackplate 11 15- Vancouver (Canada) ** TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles 19 17- Geneva (Switzerland) * TMB Technical Management Board 18 18- Frankfurt (Germany) * TC 184/SC 2 Automation systems and integration/Robots and robotic devices 19 21- Matsue (Japan) ** TC 37 Terminology and other language and content resources 26 22- Avignon (France) * TC 54 Essential oils 25 22- (Netherlands) ** TC 34/SC 9 Food products/Microbiology 26 22- (China) ** TC 69 Applications of statistical methods 26 22- Göteborg (Sweden) * TC 188 Small craft 26 Matsue (Japan) ** JTC 1/SC 28 Information technology/Office equipment</p><p>(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training Zurich (Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products Beijing (China) ** TC 46 Information and documentation</p><p>Mexico City (Mexico) ** TC 242 Energy Management (Unknown) ** TC 268/SC 1 Sustainable development in communities/Smart community infrastructures June-July 2015 30-3 (Cyprus) ** TC 193 Natural gas 30-3 (Cyprus) ** TC 193/SC 3 Natural gas/Upstream area 2nd Quarter 2015 (Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing Istanbul (Turkey) ** TC 120 Leather</p><p>(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments Vico Equense (Italy) ** TC 184/SC 4 Automation systems and integration/Industrial data</p><p>1st Semester 2015 London (United ** TC 8/SC 8 Ships and marine technology/Ship design Kingdom) (USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres</p><p>July 2015 1-7 Berlin (Germany) * TC 91 Surface active agents (USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air- conditioners and heat pumps August 2015 26- Jeju (Korea, Republic * TC 206 Fine ceramics 28 of) August-September 2015 31-4 Hokaido (Japan) * JTC 1/SC 35 Information technology/User interfaces September 2015 1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment 1-6 (Canada) ** TC 205 Building environment design 7-14 Sydney (Australia) ** TC 96 Cranes 13- Lahaina, Hawaii ** TC 127 Earth-moving machinery 17 (USA) 14- Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and 25 verification 15- Seoul (Korea, * TMB Technical Management Board 16 Republic of) 16- Seoul (Korea, * GA General Assembly 18 Republic of) 17- Moscow (Russian ** TC 197 Hydrogen technologies 18 Federation) 19 Seoul (Korea, ** COUNCIL Council Republic of) Vienna (Austria) ** TC 33 Refractories Paris (France) ** TC 34/SC 17 Food products/Management systems for food safety</p><p>(Japan) ** TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings Seattle (USA) ** TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry (Netherlands) ** TC 258 Project, programme and portfolio management</p><p>2nd-3rd Quarter 2015 (Europe) ** TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests</p><p>October 2015 15- Seattle (USA) * TC 201 Surface chemical analysis 17 19- (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools 23 26- New Delhi (India) * JTC 1/SC 27 Information technology/IT Security techniques 30 28- Tsukuba (Japan) ** TC 202 Microbeam analysis 30 Madrid (Spain) ** TC 10/SC 8 Technical product documentation/Construction documentation</p><p>(Netherlands) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals (Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils</p><p>Nairobi (Kenya) ** TC 38 Textiles Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants</p><p>Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns</p><p>Nairobi (Kenya) ** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics Sao Paulo (Brazil) ** TC 58/SC 2 Gas cylinders/Cylinder fittings Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment (USA) ** TC 92 Fire safety</p><p>Santiago (Chile) ** TC 195 Building construction machinery and equipment November 2015 9-12 (Spain) ** TC 189 Ceramic tile (China) ** JTC 1 Information technology</p><p>4th Quarter 2015 Dayton, Ohio (USA) ** TC 159/SC 3 Ergonomics/Anthropometry and biomechanics</p><p>(China) ** TC 282 Water re-use</p><p>2nd Semester 2015 (Europe) ** TC 126/SC 2 Tobacco and tobacco products/Leaf tobacco (USA) ** TC 184/SC 4 Automation systems and integration/Industrial data</p><p>Month unknown 2015 Brussels (Belgium) ** TC 23 Tractors and machinery for agriculture and forestry</p><p>(Brazil) ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery (USA) ** TC 27 Solid mineral fuels (Finland) ** TC 44 Welding and allied processes</p><p>(France) ** TC 45 Rubber and rubber products Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids</p><p>(Japan) ** TC 142 Cleaning equipment for air and other gases (China) ** TC 155 Nickel and nickel alloys</p><p>(United Kingdom) ** TC 164 Mechanical testing of metals (Austria) ** TC 190 Soil quality</p><p>(China) ** TC 274 Light and lighting</p><p>January 2016 (China) ** TC 120 Leather</p><p>February 2016 (USA) ** TC 213 Dimensional and geometrical product specifications and verification April 2016 Seoul (Korea, ** TC 161 Control and protective devices for gas and/or oil burners and Republic of) appliances (Australia) ** TC 178 Lifts, escalators and moving walks</p><p>May 2016 (Brazil) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment (India) ** TC 85 Nuclear energy, nuclear technologies, and radiological protection</p><p>June 2016 (Germany) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training 1st Semester 2016 (China) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis October 2016 (Korea, Republic of) ** TC 201 Surface chemical analysis</p><p>November 2016 (Norway) ** JTC 1 Information technology</p><p>Month unknown 2016 (Korea, Republic of) ** JTC 1/SC 23 Information technology/Digitally Recorded Media for Information Interchange and Storage (Russian Federation) ** REMCO Committee on reference materials</p><p>(Denmark) ** TC 37 Terminology and other language and content resources (Australia) ** TC 44 Welding and allied processes</p><p>(Malaysia) ** TC 45 Rubber and rubber products Wellington (New ** TC 46 Information and documentation Zealand) (Sweden) ** TC 102 Iron ore and direct reduced iron</p><p>(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies June 2017 (Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training June 2018 (Korea, Dem. P. Rep. ** JTC 1/SC 36 Information technology/Information technology for learning, of) education and training</p>