<p> Certified Manufacturing Technologist and Certified Manufacturing Engineer Exam Review Course</p><p>Time: Noon to 2:00 p.m. CDT Format: Interactive Web Course (GoToMeeting) Dates: Thursdays, May 8, 15, 22, 29, June 5, 12, 19, July 3, 10, and 17, 2014</p><p>Course Fee: $900 Per Person</p><p>Exam Fee: $245 SME Members; $490 Nonmembers</p><p>Exam: Proctored On-site By an Authorized Person</p><p>Certified Manufacturing Technologist (CMfgT) Requirements: This certification primarily benefits new manufacturing engineers and experienced manufacturers without other credentials. Pursuing a CMfgT certification requires a minimum of 4 years combined manufacturing-related education and/or work experience. </p><p>Certified Manufacturing Engineer (CMfgE) Requirements: Professionals who earn a CMfgE demonstrate a comprehensive knowledge of manufacturing processes and practices. Pursuing a CMfgE certification requires a minimum of 8 years of combined manufacturing-related education and/or work experience, including a minimum of 4 years of work experience. A CMfgT with a minimum of 7 years manufacturing-related work experience and/or education also qualifies.</p><p>Exam Review Course Outline Session Date Pre-Work 1 May 8 Review the SME Certification Process and Requirements Review the Body of Knowledge Read Chapters 1-3 and Complete the Review Questions for Chapters 1-3 In Class Practice Test 2 May 15 Read Chapters 4-6 and Complete the Review Questions for Chapters 4-6 In Class Practice Test 3 May 22 Read Chapters 7-11 and Complete Review Questions for Chapter 7-11 In Class Practice Test 4 May 29 Read Chapters 12-16 and Complete Review Questions for Chapters 12-16 In Class Practice Test 5 June 5 Read Chapters 17-22 and Complete Review Questions for Chapters 17-22 In Class Practice Test 6 June 12 Read Chapters 23-28 and Complete Review Questions for Chapters 23-28 In Class Practice Test 7 June 19 Read Chapters 29-34 and Complete Review Questions for Chapters 29-34 In Class Practice Test 8 July 3 Read Chapters 35-40 and Complete Review Questions for Chapters 35-40 In Class Practice Test 9 July 10 Read Chapters 41-50 and Complete Review Questions for Chapters 41-50 In Class Practice Test 10 July 17 Read Chapters 51-57 and Complete Review Questions for Chapters 51-57 In Class Practice Test</p><p>See Chapter Descriptions on the next page.</p><p>Contact Chuck Gates at [email protected] Certified Manufacturing Technologist and Certified Manufacturing Engineer Exam Review Course</p><p>Chapter Description Chapter Description 1 Mathematics 30 Finishing 2 Units of Measure 31 Plastics Processes 3 Light 32 Composite Processes 4 Sound 33 Ceramic Processes 5 Electricity/Electronics 34 Printed Circuit Board Fabrication/Assembly 6 Statics 35 Production Planning and Control 7 Dynamics 36 Lean Production 8 Strength of Materials 37 Process Engineering 9 Thermodynamics and Heat Transfer 38 Fixture and Jig Design 10 Fluid Power 39 Materials Management 11 Chemistry 40 Industrial Safety, Health & Environmental 12 Material Properties 41 Manufacturing Networks 13 Metals 42 Computer Numerical Control Machining 14 Plastics 43 Programmable Logic Controllers 15 Composites 44 Robotics 16 Ceramics 45 Automated Material Handling & Identification 17 Engineering Drawing 46 Statistical Methods for Quality Control 18 Geometric Dimension & Tolerance 47 Continuous Improvement 19 Computer Aided Design/Engineering 48 Quality Standards 20 Product Development and Design 49 Dimensional Metrology 21 Intellectual Property 50 Nondestructive Testing 22 Product Liability 51 Management 23 Cutting Tool Technology 52 Leadership and Motivation 24 Machining 53 Project Management 25 Metal Forming 54 Labor Relations 26 Sheet Metalworking 55 Engineering Economics 27 Powdered Metals 56 Sustainable Manufacturing 28 Casting 57 Personal Effectiveness 29 Joining and Fastening</p><p>Contact Chuck Gates at [email protected]</p>