<p> Tube Bender I – 2nd Shift Job Description</p><p>MPP#: Pay Family: Hourly, Non-exempt Manager: Aerospace Business Leader Department: Tube & Duct Shift: 2nd Shift </p><p>Job Summary: Set up and operate a variety of CNC and NC tube benders to manufacture bent or formed aerospace tubes. Inspect product for conformance at each operation per blueprint/drawing. </p><p>Duties and Responsibilities:  Set up machines and CNC or NC programs according to work instructions to trim, bend, form, and inspect material to meet fabrication drawing requirements.  Trim, deburr, and prepare material for bending.  Bend, form, clean, cold work, polish, and inspect product using fixtures, jigs, shop aids, etc. to meet requirements.  Read and understand blueprints, travelers/routers, and work instructions.  Inspect, maintain, and log preventative maintenance on equipment needed for tube bending or forming.  Provide instruction and technical support on any parts, equipment, and processes assigned to manufacturing cell.  Troubleshoot and solve manufacturing quality deficiencies within cell.  Perform other duties as assigned.</p><p>Qualifications / Requirements:  Strong understanding of angles, planes, and associated geometry.  Mathematical and reading skills.  Ability to read, write, speak English.  Legal authorization to work in the United States. </p><p>Desired Characteristics:  Experience with tube bending, metal forming or similar manufacturing process  Strong mechanical and technical aptitude  Good attention to detail and eye/hand coordination skills.  Experience with Aerospace manufacturing  Flexible in changing priorities.</p><p>This job description is not meant to be an all-inclusive statement for every duty and responsibility that will ever be required of an employee in the job. 41903M Job Description Template, Rev B Page 1 of 1  Ability to work in manufacturing environment with minimal technical support.</p><p>Work Environment:  May be exposed to noise, dust, fumes, airborne particles, smoke (Not over OSHA Permissible Exposure Levels).  Safety training and equipment are provided by MPP in accordance with applicable law, industry standards and company policy.  Occasionally lifts 25 – 45lbs.</p><p>This job description is not meant to be an all-inclusive statement for every duty and responsibility that will ever be required of an employee in the job. 41903M Job Description Template, Rev B Page 2 of 1 </p>