Lean Manufacturing

Lean Manufacturing

<p> Lean Manufacturing Case Study</p><p>The Case study was prepared by: Dr. Richard A. Wysk The Pennsylvania State University [email protected]</p><p>This Case study is intended for free use at not-for-profit academic institutions. Faculty at these institutions should feel free to use and modify the materials as required for their course offering. Use of the material by for profit companies or individuals requires the permission of the author. Feedback from users is greatly appreciated.</p><p>Intent: The Case materials provided are intended to provide students with a working practicum for Lean Manufacturing. The material is partitioned into three components, each that should require approximately 1 hour to conduct. The components provide an application practice for: 1) Value stream mapping/ waste reduction 2) Cellular development and group tooling 3) Kanban implementation and factory pull</p><p>Materials: The products that will be produced for the Case study are key-ring holders of different geometry. The product is made from pine 1” X 6” X 8’ boarding cut to square pieces that are 5 9/16 X 5 9/16 X .875 squares (Yes, a 1” X 6” board is really 0.875” X 5.5625” ). ¼ inch dowels are cut into 1 inch pieces as part of the exercise and then assembled into the base. A mitre saw is used to cut the dowels, and a hammer is used to press them into the base. Raw materials: 1”x 6” X 8’ pine boarding (several pieces) ¼ X 36” dowels</p><p>Tooling: Hand drill with ¼” bit Mitre box and saw Hammer Center punch Scale and pencil</p><p>Facilities 3 –4 tables that can be hammered on sawed on. Power strip</p>

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    1 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us