<p> Industrial Boiler Operation Make up</p><p>Student</p><p>Date</p><p>1. Describe two different ways you can test steam traps. (10 points) What two problems will result if a steam trap is leaking? (6)</p><p>2. How and how often will you test and check a safety valve? (20)</p><p>3. Give the general steps for shutting down a boiler and preparing for the annual inspection.(20)</p><p>4. How will you test a low water fuel cut off? How often will you do the test (best answer)? (10)</p><p>5. How will you test a low gas pressure cut-off? (5)</p><p>6. How will you check a low water fuel cut off? How often will you do the check? (10 points)</p><p>7. You walk into the boiler room. There is no water in the gage glass but the boiler is still firing. Describe exactly what you will do.(10 points)</p><p>8. You walk into the boiler room. The boiler is overpressure but the safety valve has not popped open. Describe what you will do. (10 points)</p><p>9. You walk into a boiler room and there is no fire but the pressure gage indicates that the boiler should be firing. The boiler has computerized controls. What would you do? (20) 10. Give a general start-up and shut-down sequence for a boiler timer control. (10 points) Describe the purpose for each part of the sequence. (10)</p><p>11. What four conditions are you trying to manage or prevent with a boiler water treatment program? (12)</p>