<p> Ceramic Filter Electrical Specifications (To Be Completed for all RF Filter Quotes)</p><p>Company Name: ______Application ______</p><p>Contact/Designer: ______Potential ______</p><p>Phone: ______Target Pricing ______</p><p>E-mail: ______Timing ______</p><p>Program Name: ______Competition______Date/Requestor: ______</p><p>Specification No. </p><p>Doc. No.: Revision: Filter No.: Date: ECO No.: Prepared By: Specification 1.0 ELECTRICAL 1.01 Center Frequency (Fo) MHz 1.02 Poles 1.03 Bandwidth (BW) MHz 1.04 IL @ BW dB max. 1.05 Ripple @ BW dB max 1.06 RL @ BW dB min.</p><p>1.07 Attenuation @ 2250 MHz dBc min @ 2450 MHz dBc min @ 4180 MHz dBc min 1.08 Temperature Range °C 1.09 Impedance 50  2.0 MECHANICAL Approvals :</p><p>Engineering:______Date:______</p><p>See attached e-mail with electrical and mechanical requirements.</p><p>THIS DOCUMENT IS PROPERTY OF TRANS-TECH, INC. AND MUST NOT BE REPRODUCED IN WHOLE OR PART. THE CONTENTS MAY NOT BE DIVULGED TO ANY UNAUTHORIZED PERSONS WITHOUT THE WRITTEN CONSENT OF TRANS-TECH, INC. FORM D0400-3 A = db Attenuations (absolute) are relative to zero dB; dBc Attenuations are relative to filter center</p><p>Sales/SalesPolicies&Procedures/Quotes/RFComponents/Filter Electrical Specifications.doc TT-F0225, Rev 1 08/27/08 5520 Adamstown Road, Adamstown, MD 21710 USA 301.695.9400 www.trans-techinc.com</p>