<p> Urban Management Division Reference Specifications for Civil Engineering Work S230 Structural Steel - Annexure</p><p>COMMENTARY</p><p>USING THE DOCUMENTS The latest edition of this annexure can be obtained by down loading from internet site http:// www.brisbane.qld.gov.au/business/ developing in brisbane. The user can either mark up a paper copy to suit the proposed contract or edit the file direct in Microsoft Word 97 (or later). Please note that the section and page breaks in the Microsoft Word file have been inserted to suit double-sided printing.</p><p>This annexure forms part of a two-part specification system. The corresponding reference specification and this annexure must be incorporated in the tender documents either by reference alone (quoting an edition date) or both by reference and physical inclusion.</p><p>The annexure modifies the reference specification by additions, deletions or amendments and takes precedence over any inconsistent provisions in the reference specification. In particular, the annexure adapts the reference specification to the technical needs for the particular project. However the user may, alternatively, employ a ‘Job Specification’ to convey job-specific information. If both annexure and job specification are used, the job specification takes precedence.</p><p>Because of the job-specific nature of the annexure, it is important to identify the project adequately in the header to the annexure or in the text of each section (either by description or by a contract serial number).</p><p>CONTRACTUAL PROVISIONS The reference specification and annexure deal only with technical and administrative matters. They do not deal with commercial arrangements. It is most important that they are used in conjunction with an adequate contract, which makes all necessary commercial arrangements including provisions for measurement of work and methods of payment.</p><p>December 2001 i</p><p>Urban Management Division Reference Specifications for Civil Engineering Work S230 Structural Steel - Annexure</p><p>INSPECTION (Clause 2.1) Specify additional witness points for the Contract. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>...... </p><p>Specify stages where notification is not required for the Contract. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>...... </p><p>Specify hold points (ie work stages that cannot proceed without approval) in the Contract. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>...... </p><p>TESTS (Clause 2.2) If not shown on the drawings, complete schedule of non-destructive testing inspection of bars and sections. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Items Test method Other requirements</p><p>STEEL TYPE AND GRADE (Clause 3.0) If not shown on the drawings, specify steel grade for additional materials. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Steel castings to AS 2074:...... Hot-rolled plate, sheet and strip to AS/NZS 1594:...... Cold-rolled sheet and strip to AS/NZS 1595:...... Hot-dipped coated sheet and strip to AS 1397:...... </p><p>December 2001 1 Urban Management Division Reference Specifications for Civil Engineering Work S230 Structural Steel - Annexure</p><p>BOLTING (Clause 4.2) Complete bolting category schedule if connection details are not shown on the drawings and/or variations to the default provisions apply. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Joint location Bolt type Bolting category</p><p>WELDING (Clause 4.3) Complete welding schedule if details are not shown on the drawings and/or variations to the default provisions apply. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Location Weld type Weld category</p><p>ERECTION (Clause 4.4) Specify tolerances that are different from the default provisions. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Location Tolerance </p><p>PROTECTIVE COATINGS (Clause 5.3) Complete paint coating schedule if details are not shown on the drawings and/or variations to the default provisions apply. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Steel member or Surface preparation Protective system (eg one Minimum dry surface method to AS 1627 brush coat of oxide film thickness phosphate primer)</p><p>December 2001 2 Urban Management Division Reference Specifications for Civil Engineering Work S230 Structural Steel - Annexure</p><p>GALVANISING COATINGS (Clause 5.4) Complete galvanising schedule if details are not shown on the drawings and/or variations to the default provisions apply. [Insert the relevant requirements or insert ‘Not Applicable’]</p><p>Steel member or surface Surface preparation method to AS 1627 Coating mass</p><p>December 2001 3 </p>