<p> DCC Number: E080-059-00-X Date Prepared: 01-28-08 Process Traveler OMC SUS Box 3 Shipping</p><p>Originator Cognizant Engineer Ext./Phone# Project Account Number Norna Robertson Norna Robertson X2130 ELIGO Dwg/Part Rev Part Description Serial Number Qty Number Item 1 Tools (clamp and bubble)</p><p>Item 2 Masses + hook for wire jig</p><p>Item 3 Alternative EQ stops + brackets (marked THIS WAY UP)</p><p>Item 4 Spare blade clamps (angled)</p><p>Item 5 +/- masses for top mass and metal bench</p><p>Item 6 Targets for OSEM alignment + hardware</p><p>Item 7 Hardware for OSEMs</p><p>Item 8 Spare OMC wire clamps + hardware</p><p>Item 9 Sockethead cap screws for attaching structure to table</p><p>Item 10 Spacers to adjust height between blade assembly and blade platform</p><p>.</p><p>N.B.: A copy of this traveller must be submitted to the DCC each time the original is shipped with the associated part(s) and when the traveller has been completed. DCC Number: E080-059-00-X Date Prepared: 01-28-08 Process Traveler OMC SUS Box 3 Shipping</p><p>Used In (next higher assembly): Vendor Name PO/Contract Number</p><p>Data Package, Receiving/Inspection Remarks: Inspection Visual Damage Comments Name/ Initials Date Comp. Required Y/N Y/N NO</p><p>Process Flow: # Operation Start Date Work Area Instructions Name/ Initials Date Comp. 1 Re-Clean CIT per E960022, with the following special instructions or R. Taylor cautions: Strong Magnetic fields 2 Re-Vacuum Bake CIT per E960022 to a temperature of XXXC N/A R. Taylor</p><p>3 Control Point NA Received at LLO J Romie</p><p>4 Wrap & Tag vacuum clean CIT Wrap (UHV foil) and bag (CP Stat or equiv.) per R. Taylor parts per E960022-A E960022.</p><p>5 Deliver/File paperwork CIT Make 2 copies of the Traveler. R Taylor File one copy with the DCC. 6. SHIP TO Janeen Romie at LLO R Taylor</p><p>Note: Ship original traveler with these parts.</p><p>N.B.: A copy of this traveller must be submitted to the DCC each time the original is shipped with the associated part(s) and when the traveller has been completed. DCC Number: E080-059-00-X Date Prepared: 01-28-08 Process Traveler OMC SUS Box 3 Shipping</p><p># Operation Start Date Work Area Instructions Name/ Initials Date Comp. END: Go to Traveler or procedure associated with next higher assembly processing</p><p>Special Instructions (Handling/Packaging Constraints, Remarks, etc.) or Notes: 1. 2. 3. 4. </p><p>N.B.: A copy of this traveller must be submitted to the DCC each time the original is shipped with the associated part(s) and when the traveller has been completed.</p>