<p> Engineering & Manufacturing, Inc. 203 Main St SW  Phone 479-787-5206 Fax 479-787-6503 Gravette, AR 72736</p><p>CNC Machinist Position: CNC Lathe or Mill </p><p>Must be able to do own set-ups and work with programmer to make changes as needed. Mastercam and/or Mazak/Haas or Fanuc control experience a plus, 2 yrs min. experience. Must have your own tools.</p><p>Should have the following: 1. A working knowledge of computers and how to pull up programs, transfer files and save updated programs in directories as needed. 2. An understanding of how to figure speeds and feeds for cutting – Tools steels such as A1, O1, H13, D2, S7 and also 300 or 400 series Stainless Steel, 6061 Aluminum and various plastics. 3. An excellent ability to read blue prints with an understanding of ASME Y14.5M-1994 4. An understanding of ISO 9001:2008 and lean manufacturing principles</p><p>If you are qualified for the above position and like a challenge, want to utilize your skills apply in person or send resume. You can also check out our web site and/or submit resume to amarkeng.com </p><p>Must be willing to work OT-all positions are daytime.</p><p>Amark is one of the larger job shops in NW AR. ISO9001:2008 We offer health, life insurance, dental, short term and long term disability 401 K, Paid holidays. Amark is an EOE. Pay based on experience. Current pay is $10.00 - $22.00 per hour based on experience.</p><p>If you have the right qualifications send your resume to: Amark Engineering c/o Randy 203 Main Street SW Gravette, Ar. 72736</p><p>Or email to Randy @amarkeng.com</p>