Injection Locked Gunn Diode Oscillators Phase Locked Oscillators

Injection Locked Gunn Diode Oscillators Phase Locked Oscillators

Injection Locked Gunn Diode Oscillators Phase Locked Oscillators Bulletin No. OGI Bulletin No. OPL FEATURES FEATURES High output power High output power Moderate gain and bandwidth Low phase noise CW operation Internal or external reference Frequency up to 110 GHz Frequency up to 110 GHz APPLICATIONS APPLICATIONS Power amplification Local oscillators Instrumentation Multiplier drivers Local oscillators Subsystems Subsystems OGI Series 5 DESCRIPTION OPL Series DESCRIPTION OGI series CW injection-locked Gunn oscillators are alternatives to HEMT device and IMPATT diode based stable amplifiers, especially at high millimeterwave frequencies. The operating frequency and power output of these oscillators OPL series phase-locked oscillators are offered to cover frequency range up to 110 GHz by utilizing high performance are up to 110 GHz and 24 dBm. The spectrum purity of the output signal is injected signal dependent. There is an output FET oscillators, Gunn oscillators or multiplier/amplifier chain to produce desired frequency and power output. The free running signal in the absence of an input injection signal. The oscillators are provided with integral circulators and phase locked oscillators are offered with either internal or external referenced version. The phase noise of an externally optional DC voltage regulator. An optional heater is provided to achieve better temperature stability. For higher gain, referenced phase locked oscillator is depended on the quality of the reference signal. broader locking bandwidth and higher output, multi-stage and multi-diodes configurations are used. The operating temperature range is 0 to +50°C. SPECIFICATIONS SPECIFICATIONS FREQUENCY RANGE1 5 to 40 GHz 40 to 60 GHz 60 to 110 GHz Output Power 10 to 30 dBm 10 to 20 dBm 10 to 20 dBm Bias Bias 2 Frequency Output Locking Frequency Stability ±5 PPM I n p u t P o w e r Voltage Current W a v e g u i d e Outline R a n g e P o w e r Bandwidth (dBm) R a n g e R a n g e Size Drawing Phase Noise (Typ) Consult Factory (GHz) (dBm, Min) (GHz, Max) (Volts) (A) Harmonics (Max) - 20 dBc 26.5-40 0 to 10 24 1.5 4-12 0.3-2.5 WR-28 * Spurious (Max) - 60 dBc 33-50 0 to 10 23 2.0 4-11 0.3-2.0 WR-22 * External Reference3 100 MHz, - 3 to + 3 dBm 40-60 0 to 10 22 2.0 3-10 0.3-2.0 WR-19 * Lock Alarm Locked = TTL High; Unlocked = TTL Low 50-75 0 to 10 20 2.0 3-10 0.3-1.5 WR-15 * Temperature Range 0 to +50°C 60-90 0 to 10 19 2.0 3-10 0.25-1.5 WR-12 * 75-110 0 to 10 19 2.0 4-10 0.25-1.5 WR-10 * Note: Temperature Range 0 to +50 °C 1. Consult factory for the frequency other than listed; 2. Frequency stability is with internal reference; * Consult factory for outlines. 3. 100 MHz external reference is for standard model. Consult factory for the frequency other than 100 MHz. HOW TO ORDER HOW TO ORDER Specify Model Number OGI-CO CF BW PP - XX Factory Reserve Specify Model Number OPL-CO CF PP X – Y Z Factory Reserve RF Connector Type Output Power in dBm RF Port Connector Type “E” for External; “I” for Internal Reference Center Frequency in GHz Bandwidth in 1/10 GHz Center Frequency in GHz Factory Reserve Output Power in dBm Example: To order a center frequency 60 GHz injection locked Gunn oscillator with WR-15 waveguide interface, 2 GHz locking bandwidth and 17 dBm output power, specify OGI-15602017-XX. Example: To order an output frequency 94 GHz, 17 dBm output power phase locked oscillator with WR-10 waveguide interface and externally referenced specify OPL-109417X-EZ. High qualityHigh microwave quality microwave and millimeterwave and millimeterwave components components and subsystems. and subsystems. Visit Ducommun Visit Ducommun Technologies at onlinewww.ducommun.com at www.ducommun.com. High quality microwave and millimeterwave components and subsystems. Visit Ducommun Technologies online at www.ducommun.com. 5-485-48 5-49 76155_DucMMWaveCat.indd 48 3/17/14 2:17 PM Oscillator Outline Drawings #1 Oscillator Outline Drawings #2 WT-G-1 WT-G-2 WT-G-7 WT-G-8 WAVEGUIDE FREQUENCY TUNNER 2-56 x 0.15 DP WAVEGUIDE W/FLANGE 2 PLS W/FLANGE 2-56 x 0.15 DP WR-28 WAVEGUIDE 2 PLS W/UG599/U FLANGE 2-56 x 0.15 DP WAVEGUIDE 2 PLS W/FLANGE FREQUENCY TUNER 4-40 x 0.15 DP 2 PLS 4-40 x 0.15 DP 4-40 x 0.15 DP 2 PLS 4-40 x 0.15 DP 2 PLS 2 PLS Dimensions are in inches Dimensions are in inches Dimensions are in inches Dimensions are in inches 5 WT-G-3 WT-G-4 WT-G-9 WT-G-10 2-56 x 0.15 DP WAVEGUIDE 2 PLS W/FLANGE WR-28 WAVEGUIDE W/UG599/U FLANGE WAVEGUIDE TUNER W/FLANGE 4-40 x 0.15 DP 2 PLS 0.089 DIA x THRU 4 PLS 4-40 x 0.15 DP 2 PLS Dimensions are in inches Dimensions are in inches Dimensions are in inches Dimensions are in inches WT-G-5 WT-G-6 WT-G-11 WT-G-12 FREQUENCY TUNER BIAS PORT WR-10/WR-12/WR-15 0.14 DIA X 0.38 DP W/UG387/U FLANGE WiseWave 2-56 x 0.15 DP WAVEGUIDE WiseWave M/N: XXXXX 2 PLS M/N: XXXXX S/N: XXXXX W/FLANGE S/N: XXXXX D/C: XX/XX D/C: XX/XX POWER TUNER 4-40 x 0.28 DP 4-40 x 0.28 DP C'BORE 0.120 x 0.06 DP C'BORE 0.120 x 0.06 DP 4 PLS 4 PLS 4-40 x 0.15 DP 2 PLS 4-40 x 0.15 DP 2 PLS Dimensions are in inches Dimensions are in inches Dimensions are in inches Dimensions are in inches The flange pattern shown is for illustration purpose. Refer to Technical Reference Section for flange pattern details. The flange pattern shown is for illustration purpose. Refer to Technical Reference Section for flange pattern details. The outline The outline drawings shown are standard versions. Contact factory for your specific package requirements. drawings shown are standard versions. Contact factory for your specific package requirements. High qualityHigh microwave quality microwave and millimeterwave and millimeterwave components components and subsystems. and subsystems. Visit Ducommun Visit Ducommun Technologies at onlinewww.ducommun.com at www.ducommun.com. High quality microwave and millimeterwave components and subsystems. Visit Ducommun Technologies online at www.ducommun.com. 5-505-50 5-51 76155_DucMMWaveCat.indd 50 3/17/14 2:17 PM Oscillator Outline Drawings #1 OscillatorOscillator Outline Outline Drawings Drawings #2 #2 WT-G-1 WT-G-2 WT-G-7WT-G-7 WT-G-8WT-G-8 WAVEGUIDE FREQUENCYFREQUENCY TUNN TUNNER ER 2-56 x 0.15 DP WAVEGUIDE W/FLANGE 2 PLS W/FLANGE 2-562-56 x 0.15 x 0.15 DP DP WR-28WR-28 WAVEGUIDE WAVEGUIDE 2 PLS2 PLS W/UG599/UW/UG599/U FLANGE FLANGE 2-56 x 0.15 DP WAVEGUIDE WAVEGUIDE 2 PLS W/FLANGEW/FLANGE FREQUENCY TUNER 4-404-40 x 0.15 x 0.15 DP DP 2 PLS2 PLS 4-40 x 0.15 DP 4-40 x 0.15 DP 2 PLS 4-404-40 x 0.15 x 0.15 DP DP 2 PLS 2 PLS2 PLS Dimensions are in inches Dimensions are in inches DimensionsDimensions are arein inches in inches DimensionsDimensions are arein inches in inches 5 5 WT-G-3 WT-G-4 WT-G-9WT-G-9 WT-G-10WT-G-10 2-56 x 0.15 DP WAVEGUIDE 2 PLS W/FLANGE WR-28 WAVEGUIDE W/UG599/U FLANGE WAVEGUIDEWAVEGUIDE TUNTUNER ER W/FLANGEW/FLANGE 4-404-40 x 0.15 x 0.15 DP DP 2 PLS2 PLS 0.0890.089 DIA xDIA THRU x THRU 4 PLS4 PLS 4-40 x 0.15 DP 2 PLS Dimensions are in inches Dimensions are in inches DimensionsDimensions are arein inches in inches DimensionsDimensions are arein inches in inches WT-G-5 WT-G-6 WT-G-11WT-G-11 WT-G-12WT-G-12 FREQUENCY TUNER BIAS PORT WR-10/WR-12/WR-15 0.14 DIA X 0.38 DP W/UG387/U FLANGE WiseWWiseWave ave 2-56 x 0.15 DP WAVEGUIDE WiseWaveWiseWave M/N: XXXXXM/N: XXXXX 2 PLS M/N: XXXXXM/N: XXXXX S/N: XXXXXS/N: XXXXX W/FLANGE S/N: XXXXXS/N: XXXXX D/C: XX/XXD/C: XX/XX D/C: XX/XXD/C: XX/XX POWER TUNER 4-40 4-40x 0.28 x 0.28DP DP 4-40 4-40x 0.28 x DP0.28 DP C'BOREC'BORE 0.120 0.120 x 0.06 x 0.06DP DP C'BOREC'BORE 0.120 0.120 x 0.06 x DP0.06 DP 4 PLS4 PLS 4 PLS4 PLS 4-40 x 0.15 DP 2 PLS 4-40 x 0.15 DP 2 PLS Dimensions are in inches Dimensions are in inches DimensionsDimensions are arein inches in inches DimensionsDimensions are arein inches in inches The flange pattern shown is for illustration purpose. Refer to Technical Reference Section for flange pattern details. TheThe flange flange pattern pattern shown shown is isfor for illustration illustration purpose. purpose. Refer Refer to toTechnical Technical Reference Reference Section Section for for flange flange pattern pattern details.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    3 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us