<p>Data Sheet</p><p>OptiPro Boots.S3. Part No: F04032/Rigger</p><p>These garments bear CE marking to demonstrate compliance with EC Directives EC/686/89 Personal Protective Equipment Annex II Health and Safety requirements; and with marking directive EC/93/68/CEE. Tested to EN ISO 20345:2004.</p><p>Description: PU coated, lined, leather rigger boot with dual density polyurethane sole Anti-static providing resistance to oil, acids, solvents and heat Anti-perforation midsole for increased protection from penetration of the sole by sharp objects</p><p>Size Selection: UK 5 to 13, Euro. 36 to 48.</p><p>Packaging: Individually packed cardboard box with user instructions.</p><p>Care & Maintenance: This garment has undergone all the tests that guarantee its level of quality and performance. For care instructions, see the care label. The manufacturer will not accept liability for garments where care labels have been ignored, neglected, defaced or removed.</p><p>Storage & Transportation: Always store in clean, dry conditions. Do not store in places subject to direct, strong sunlight. This garment is suitable for transportation as supplied by the manufacturer. Symbol Risk Covered SB S1 S2 S3 S4 S5 Basic       P Penetration      A Anti-static       E Energy Absorption (Heel Area)       HI Heat Insulation       CI Cold Insulation       WRU Water Penetration      HRO Resistance to Hot Contact      </p><p> Meets the stipulated requirement  Requirement can be met but is not stipulated</p><p>Further information available at: Optipro Safety Ltd., 901 New Century Business Tower, 938 Zhongjiang Road, Shanghai 200333, China..</p>