FES Final Year Project Template

INDUSTRIAL TRAINING REPORTSTUDENT’S NAMEBachelor of Science (Hons) Quantity Surveying Lee Kong Chian Faculty of Engineering and Science Universiti Tunku Abdul RahmanDecember 2015 iiDECLARATIONI sincerely declare that: 1. I am the sole writer of this report. 2. The details of training and experience contained in this report describe my involvement as a trainee in the field of quantity surveying. 3. All the information contained in this report is certain and correct to the knowledge of the author.Signature : ______Name : ______ID No. : ______Date : ______iiiACKNOWLEDGEMENTSThe author would like to express his utmost gratitude to UTAR for providing opportunity to the author to pursue the quantity surveying training as a partial fulfilment of the requirement for the degree of Bachelor of Science (Hons) Quantity Surveying.Throughout this training, the author is very fortunate to be blessed with the guidance and encouragement from his mentor, Mr/Ms. XXXX. In addition, ……… (This acknowledgements page is optional)...... ivABSTRACTThe author joined the [company] as a trainee QS for the six months internship starting from June until November. In this report, the challenges encountered and the actions taken or solutions to overcome the problems during the training were highlighted……………… vTABLE OF CONTENTSDECLARATION ii ACKNOWLEDGEMENTS iii ABSTRACT iv TABLE OF CONTENTS v LIST OF TABLES vii LIST OF FIGURES viii LIST OF SYMBOLS / ABBREVIATIONS ixCHAPTER1 INTRODUCTION 1 1.1 Background 1 1.2 Objective of the report 1 1.3 Description of report structure 12 RELATED LEARNING OUTCOMES 3 2.1 Company background 3 2.2 Description of tasks setting 3 2.2.1 Preconstruction phase 4 2.2.2 Construction phase 4 2.2.1 Project close out 4 2.3 Report achievement of tasks set 5 2.4 Limitations and recommendations 5 2.5 Expectation after graduation and career 5 vi3 MONTLY REPORT 6 3.1 June 2015 6 3.2 July 2015 6 3.3 August 2015 7 3.3 September 2015 7 3.3 October 2015 7 3.3 November 2015 74 CONCLUSION 8 4.1 Summary 9 4.1.1 Demonstrate QS technical competence 9 4.1.2 Relate the knowledge learned with the real work environment 9 4.2 Concluding Remarks 9REFERENCES 12APPENDICES 13 viiLIST OF TABLESTABLE TITLE PAGE2.1 Past Completed Project List 42.2 Current On-Going Project List 53.1 Tenderers of Running Man Project 74.1 Previous Certified Montly Claims 9 viiiLIST OF FIGURESFIGURE TITLE PAGE1.1 Universiti Tunku Abdul Rahman Logo 52.1 Ground Floor Plan 73.1 Entrance Gate Detail – Layout Plan and Elevation94.1 Site Clearance in June 2015 20 ixLIST OF SYMBOLS / ABBREVIATIONS cp specific heat capacity, J/(kgK) h height, mKd discharge coefficient M mass flow rate, kg/s P pressure, kPaPb back pressure, kPa R mass flow rate ratio T temperature, K v specific volume, m3 homogeneous void fraction  pressure ratio  density, kg/m3  compressible flow parameterAI Architect’s Instructions BQ Bills of Quantity CIDB Construction Industry Development Board S.O. Superintending Officer VO Variation Order CHAPTER 1INTRODUCTION1. BackgroundSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.2. Objective of the ReportSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines. A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. A new chapter must start on a new page. Spacing between the last line of text and equation is 1.5 lines. ho G1   32  Toc p whereG1 = specific mass flow rate, kg/s  = density, kg/m3 T = temperature, K ho = xxx, mSpacing between the equation and first line of text is 1.5 lines. Equation should be centred, but its numbering should align with right margin.G2  2PS  P2  whereG2 = specific mass flow rate, kg/s  = density, kg/m3Spacing between the equation and first line of text is 1.5 lines. 3. Description of Report StructureSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”. CHAPTER 2RELATED LEARNING OUTCOMES1. Company BackgroundSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified” (Warner, 2002).Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.2. Description of Tasks SettingSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. A new chapter must start on a new page. 13Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. Spacing between the last line of text and table is 1.5 lines. Table 2.1 shows that Table 2.1: Processing Time (in hours) of Bread for Different Production Line in ABC Company Production Line Bread 1 2 3 4 5 A 30 18 26 17 15 B 23 22 32 25 30 C 17 31 24 22 29Spacing between the table and first line of text is 3.0 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”.2.1 Preconstruction PhaseSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.2.2 Construction PhaseSpacing between title of subsection and first line of text is 1.5 lines. A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. A new chapter must start on a new page. 142.3 Project Close Out Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. A new chapter must start on a new page.3. Report Achievement of Tasks SetSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.3.1 Sub-subsection Title 1Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.3.2 Sub-subsection Title 2Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”. 15Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.4. Limitations and RecommendationsSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. Table 2.2 is Table 2.2: Processing Time for Different Production Line Production Line Bread 1 2 3 4 5 A 30 18 26 17 15 B 23 22 32 25 30 C 17 31 24 22 29Spacing between the table and first line of text is 3.0 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. Spacing between the last line of text and figure is 1.5 lines. As depicted in figure 2.1.Figure 2.1: Universiti Tunku Abdul Rahman LogoSpacing between the figure and first line of text is 3.0 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. 165. Expectation After Graduation and CareerSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines. 17CHAPTER 3MONTLY REPORT1. Month 1 – June 2015Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified” (Warner, 2002).Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.2. Month 2 – July 2015Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. 183. Month 3 – August 2015Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.3.1 Sub-sub-subsection Title 1Spacing between title of subsection and first line of text is 1.5 lines. Spacing between the last line of text and table is 1.5 lines. As depicted in Table 3.1.Table 3.3: Processing Time (in hours) of Bread for Different Production Line Production Line Bread 1 2 3 4 5 A 30 18 26 17 15 B 23 22 32 25 30 C 17 31 24 22 29Spacing between the table and first line of text is 3.0 lines. Spacing between the last line of text and figure is 1.5 lines. Figure 3.1 depicts Source ReflectedFigure 3.2: Reflection from Smooth SurfaceSpacing between the figure and first line of text is 3.0 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. CHAPTER 4TITLE1. Subsection Title 1Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified” (Warner, 2002).Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.2. Subsection Title 2Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”. 20A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. A new chapter must start on a new page.3. Sub-subsection Title 13.1 Sub-sub-subsection Title 1Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. Spacing between the last line of text and table is 1.5 lines. As shown in Table 4.1.Table 4.4: Processing Time (in hours) of Bread for Different Production Line Production Line Bread 1 2 3 4 5 A 30 18 26 17 15 B 23 22 32 25 30 C 17 31 24 22 29Spacing between the table and first line of text is 3.0 lines. Spacing between the last line of text and figure is 1.5 lines.Figure 4.3: UTAR LogoSpacing between the figure and first line of text is 3.0 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. As depicted in Figure 4.1. 21CHAPTER 5CONCLUSION 1. SummarySpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified” (Warner, 2002).Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.1.1 Demonstrate QS Technical CompetenceSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines. 221.2 Relate the Knowledge Learned with the Real Work Environment Spacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. Spacing between last line of text and the next subsection title is 4.5 lines.2. Concluding RemarksSpacing between title of subsection and first line of text is 1.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.A new paragraph should not begin on the last line of a page. A subsection title should not begin on the last line of a page. A new chapter must start on a new page. 23REFERENCESAmerican Psychiatric Association., 1994. Diagnostic and statistical manual of mental disorders. 4th ed. Washington, DC: Publisher.Chow, B. H., 2012. Building an innovative society. The Star Online, [online] 5 Dec. Available at: <http://thestar.com.my/cus/12389549 &sec= focus> [Accessed 23 December 2012]. Christopher, P., 2006. Unleashing change: A study of organizational renewal in government. Administrative Science Quarterly, 51(2), pp. 117-123. [online] Available at: <http://ptjournal.apta.org/content/88/2/251.full> [Accessed 15 July 2013].Mak, J., 2012. More public holidays for workers. The Star, 1 Dec. p.6.Martin, S., Smith, L., Forehand, M. R., Mobbs, R., Lynch, T. F., and Renfrew, E. J. 2001, Use of collaborative technology in business. The Academy of Management Executive, 19, pp. 130-138.Playfair, J. H. and Bancroft, G. J., 2004. Infection and immunity. 2nd ed. Oxford: Oxford University Press.Roeder, K., Howdeshell, J., Fulton, L., Lochhead, M., Craig, K. and Peterson, R. 1967. Nerve cells and insect behavior. Cambridge, MA: Harvard University Press.Serlin, R. C. and Lapsley, D. K., 1985. Rationality in psychological research: The good-enough principle. American Psychologist, 40, pp. 73-83.Skinner, M. E., Sun, K. F. and Liu, R. P., 2005. Small group learning. Psychological Bulletin, 26, pp. 57-63.Walker, M. M., 2001. Transfer of lexical information in adults with reading disorders. Perceptual and Motor Skills, 93(1), pp. 257-267. 24Kindly refer to http://fes.utar.edu.my/images/Document/HarvardStyleReferencingJan2014.pdf for more details.APPENDICESAPPENDIX A: Graphs (Optional)Spacing between chapter title and first line of text is 4.5 lines. The first paragraph in a subsection should align with left margin. General alignment for texts in paragraph should be “justified”.Spacing between paragraphs is 1.5 lines. Subsequence paragraphs should be indented 1.27 cm (0.5 inch) from the left margin. General alignment for texts in paragraph should be “justified”. 25APPENDIX B: Log Book(Attach the daily log in the following pages) 26DAILY RECORDS (FOR QS STUDENT)WEEK NO. ____Date Duties Performed / Task setting Work Area CodeStudent’s Acknowledgement Supervisor’s Acknowledgement______27APPENDIX C: Area of Work Involvement Summary(Attach the Area of Work Involvement in the following pages) 28 QS Industrial Training Log Book AREA OF WORK INVOLVEMENT SUMMARY AREA OF WORK 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 A MISCELLANEOUS WORK 1 Folding of tender and contract drawings, printing, photocopying and compiling of bills of quantities and other documents 2 Working up – squaring, check squaring, abstracting, shuffling, etc 3 Filing, collecting, arranging, photocopying and keeping project drawings, catalogues collection and filing B COST ANALYSIS & COST PLANNING The preparation and use of the following information 1 Prepare and use of cost analysis 2 Cost estimates based on sketch plan and/or detailed design 3 Detailed budgets, cost plan and cost monitoring and checking C PRE-CONTRACT DOCUMENTATION 1 Preparing bills of quantities (Includes Measurement) 2 Preparation and editing of specification or schedules of rates 3 Preparation of specification 4 Call for quotation D TENDERING PROCEDURES AND CONTRACTUAL ARRANGEMENT 1 Considering and reporting on method of tendering by Competition/Selection/Negotiation 2 Considering and reporting on types of contract 3 Calling of tenders, selection of tenderers and tender evaluation E POST CONTRACT WORK 1 Interim valuation and certification 2 Valuation of variation work 3 Measurement of work done 4 Administration of contractors’ claims 5 Preparation of subcontract document 6 Processing Defect List 7 Processing Penultimate Certificate 8 Finalisation of quantities/star rate 9 Preparation of final account F FEASIBILITY AND ECONOMIC STUDY 1 Feasibility study and report 2 Comparative design economics 3 Compilation of cost limits 4 Preparation of work programme and/or schedule 5 Cost in use study/life cycle costing G OTHER WORK NOT SPECIALLY MENTIONED 1 2 3 4 Total Hour(s) (A) (A) (A) (A) (A) (A) (A) Trainee (A) and supervisor (B) to acknowledge at the end of every four (4) week. (B) (B) (B) (B) (B) (B) (B) Name of Trainee : Company : Student ID : Year/Session :

FES Final Year Project Template

Details

Download

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

Support