<p>This document is part of the Safety Toolbox on http://www.wilderness.net/safety/</p><p>Loss Control Management NPS-50 Job Safety Analysis GLACIER NATIONAL PARK National Park Service Job Safety Analysis</p><p>Job Title: POWER BRUSHING Job Location: Date: </p><p>Key Steps Hazard(s) Safety Procedures Responsibility POWER BRUSH  ROCKS KICKING OUT  BE AWARE OF YOUR SURROUNDINGS Employee CUTTING FROM BLADE  REMOVE DEBRIS FROM AREA BEFORE BRUSHING  WEAR HARD HAT, HEARING PROTECTION, FACE SHIELD, GLOVES AND PROPER FOOT GEAR</p><p> CUTTING ON SIDE HILL  MAKE SURE YOU HAVE SECURE FOOTING Employee  KEEP CONTROL OF BRUSH CUTTER  DO NOT MAKE WILD SWINGS WITH BRUSHER</p><p> VISITORS OR CO-  HAVE CO-WORKERS KEEP THEMSELVES AND VISITOR Employee WORKERS AWAY FROM THE AREA YOU ARE WORKING.  BE ALERT TO YOUR SURROUNDINGS.</p><p> FLYING STICKS OR  WEAR HARD HAT, HEARING PROTECTON, FACESHIELD, Employee BRUSH GLOVES AND PROPER FOOT GEAR.</p><p> SLIPS AND FALLS  DO NOT FORCE THE BRUSH CUTTER Employee  WEAR PROPER FOOT GEAR  CHECK YOUR FOOTING  IF YOU FALL, PUSH THE BLADE INTO THE GROUND TO STOP THE SPINNING</p>