<p> Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference MSEC2016 June 27 – July 1, 2016, Blacksburg, Virginia, USA</p><p>MSEC2016-Paper No.</p><p>PUT PAPER TITLE HERE</p><p>Author Name Author Name Affiliation Affiliation City, State, Country City, State, Country</p><p>Author Name Author Name Author name Affiliation Affiliation Affiliation City, State, Country City, State, Country City, State, Country</p><p>KEYWORDS https://www.asme.org/shop/proceedings/conference- Put at least three keywords here publications/elements-of-a-paper</p><p>ABSTRACT METHOD Put abstract text here. Describe your methods here. Feel free to rename An abstract should including the following five this section as appropriate as well as add additional elements: (1) objective, (2) motivation, (3) method, sections and sub-sections. (4) result, and (5) conclusion. At least one sentence should be devoted to each element. RESULTS Describe your results here. Feel free to rename this section as appropriate as well as add additional INTRODUCTION sections and sub-sections. Early prior research demonstrated the superiority of ceramics for bearings (1, 2) and the existence of elasto- CONCLSUIONS hydrodynamic (ehd) lubricant films at ball and roller Include your conclusions here. Re-stating results contacts (3), the calculation of which is now an accepted in a concise manner by itself does not constitute a part of bearing engineering. These new concepts are conclusion. The conclusions section should also now used in the design of lubrication systems with solid include text that explains the significance of the lubricants that operate in much more severe results to the reader. Why should the reader care environments than oils and greases (4, 5). Proprietary about the results? computer codes and unique patented bearing configurations for optimizing the performance of NOMENCLATURE bearing/solid-lubricant systems have been developed (6, Put nomenclature here. 7 and 8). In this way, patented self-contained solid- lubricated all-steel and hybrid-ceramic ball and roller ACKNOWLEDGMENTS bearings are now available for environments that do not Put acknowledgments here. contribute to their lubrication, such as in air or vacuum. REFERENCES Put references here. LaTex and Framemaker templates can be found at The ASME citation format can be found at the the following website: following website: https://www.asme.org/shop/proceedings/conference- https://www.asme.org/shop/proceedings/conference- publications/author-templates publications/references</p><p>ASME describes the elements of a paper at the following website: 1 Copyright © 2016 by ASME ANNEX A</p><p>PUT ANNEX TITLE HERE</p><p>Put text of Annex here</p>